Theoretical evaluation of the corrosion inhibition performance of aliphatic dipeptides

2021 ◽  
Author(s):  
Anton Kasprzhitskii ◽  
Georgy Lazorenko ◽  
Tatyana Nazdracheva ◽  
Aleksandr Kukharskii ◽  
Victor Yavna ◽  
...  

Corrosion significantly limits the operational capabilities of metals and alloys reducing their service life. Finding environmentally friendly and economically justified alternatives to commercially used corrosion inhibitors is an important problem....

2008 ◽  
Vol 24 (07) ◽  
pp. 1239-1244 ◽  
Author(s):  
ZHANG Jun ◽  
◽  
◽  
ZHAO Wei-Min ◽  
GUO Wen-Yue ◽  
...  

CORROSION ◽  
10.5006/3844 ◽  
2021 ◽  
Author(s):  
Ahmed Mohamed ◽  
D. Visco Jr. ◽  
David M. Bastidas

Chloride–induced corrosion of carbon steel reinforcements is one of the most important failure mechanisms of reinforced concrete structures. Organic corrosion inhibitors containing different functional groups were analyzed using cyclic potentiodynamic polarization to determine their effect on the pitting potential of carbon steel reinforcements in a 0.1 M Cl– contaminated simulated concrete pore solution. It was found that organic compounds with π–electrons in a functional group had better performance. This is attributed to the high density of highest occupied molecular orbital energies found in carboxyl group π–bond. Accordingly, increasing the tendency of donating π–electrons to the appropriate vacant d–orbital of the carbon steel, forming an adsorption film. The best corrosion inhibition performance was achieved by poly–carboxylates followed by alkanolamines and amines. In addition, a novel approach to show the significance of corrosion inhibition phenomenon was applied by developing a quantitative structure-property relationship using the Signature molecular descriptor which correlates the occurrences of atomic Signatures in a dataset to a property of interest using a forward stepping multilinear regression. The atomic Signature fragment capturing π–bond was the most influential of all the fragments, which underscores the significance of π–bond electrons in the adsorption process. It was demonstrated that the [O](=[C]) atomic Signature plays a crucial role in the inhibition process at all heights, corroborating the experimental results.


2014 ◽  
Vol 664 ◽  
pp. 70-74
Author(s):  
Li Hui Zhang ◽  
Zhen Fa Liu ◽  
Ru Hui Guo

A kind of multifunctional environmentally friendly corrosion inhibitor (DHS) was prepared in order to protect many kinds materials from corrosion in iron and steel enterprise. The corrosion inhibition performance was studied by rotary hanging-piece corrosion tests . And biodegradability was investigated by biodegradation experiments . The experimental results showed that DHS has good performance both on corrosion inhibition and biologic degradable. It was suitable for the serious of materials and presense in iron and steel enterprise when the concentration of DHS was 0.4%. And the efficiency of biodegradability was 52.45% in 28d .


2011 ◽  
Vol 53 (1) ◽  
pp. 147-152 ◽  
Author(s):  
Jun Zhang ◽  
Guimin Qiao ◽  
Songqing Hu ◽  
Youguo Yan ◽  
Zhenjia Ren ◽  
...  

2013 ◽  
Vol 864-867 ◽  
pp. 386-389
Author(s):  
Xue Juan Wang ◽  
Hong Hua Ge ◽  
Wei Wei Lin ◽  
Min Zhang

Performance evaluation of three scale and corrosion inhibitors in simulated cooling water according to generating set in a power plant was presented in this paper. The scale and corrosion inhibition performance of the inhibitors were conducted by the methods of the static scale inhibition and rotary coupon tests respectively. The results indicated that 316L stainless steel has low uniform corrosion rate ranging from 0.0042 to 0.0048 mm/a in the simulated cooling water both with and without inhibitors. The drops of hardness in water with No.1 and No.3 inhibitors were slight, and these two inhibitors were of good scale inhibition while No.2 was poor. Keywords: simulated cooling water; scale inhibition; corrosion inhibition; performance evaluation; 316L stainless steel.


PeerJ ◽  
2019 ◽  
Vol 7 ◽  
pp. e7193 ◽  
Author(s):  
Liew Chien Go ◽  
William Holmes ◽  
Dilip Depan ◽  
Rafael Hernandez

Background Waste activated sludge (WAS) has recently gained attention as a feedstock for resource recovery. The aim of this study is to investigate the corrosion inhibition efficiencies of extracellular polymeric substances (EPS) extracted from WAS. Methods The studied corrosion inhibitors were tested with carbon steel in 3.64% NaCl saturated with CO2 at 25 °C, which is the typical oilfield environment. They were first prepared by EPS extraction (heating at 80 °C), followed by centrifugation for solid and liquid separation, then the supernatant was freeze-thawed five times for sterilization of microorganisms in WAS to terminate metabolic activities in the test inhibitors to ensure consistency in corrosion inhibition. The EPS mixture (supernatant) was then deemed as the test corrosion inhibitor. The inhibition performance was determined using potentiodynamic polarization scans. Results Waste activated sludge alone showed unsatisfactory inhibition. However, EPS extracted from WAS showed an optimum inhibition of approximately 80% with 1,000 mg/L of inhibitor. The average total solid (TS) and EPS contents of the WAS were 7,330 mg TS/L WAS and 110 mg EPS/g TS, respectively. Three sets of extracted EPS were scanned with fourier-transform infrared spectroscopy (FTIR) and showed almost overlapping curves, yielding the consistent inhibition performance. Discussion The potentiodynamic polarization results indicated that EPS acts as a mixed-type inhibitor which inhibits corrosion on both anode and cathode sites of metal surfaces. Based on the FTIR results, it was assumed that major chemical groups O–H, N–H, C–N, C=O, and C–H contributed to the inhibition by adsorbing on the metal surface, forming a biofilm that acts as a protective barrier to isolate the metal from its corrosive environment. Results show that WAS EPS corrosion inhibitors have inhibition performance comparable to commercial products, signifying their potential in commercialization. This corrosion inhibitor is renewable, biodegradable, non-toxic, and free from heavy metal, making it a superior green corrosion inhibitor candidate. Additionally, turning biomass into value-added product can be beneficial to the environment and, in this case, deriving new materials from WAS could also transform the economics of wastewater treatment operations.


Author(s):  
Zineb TRIBAK ◽  
Mohammed Khalid SKALLI ◽  
Omar SENHAJI

The corrosion inhibition performance of a corrosion inhibitor on mild steel in phosphoric acid, namely 5-chloro-1-(2-(dimethylamino) ethyl) indoline-2,3-dione (TZCDI), was theoretically evaluated using density functional theory (DFT) at the B3LYP/6-31G+(d,p) level for all atoms by Gaussian 09W program. The quantum chemical properties, such as highest occupied molecular orbital energy (EHOMO), lowest unoccupied molecular orbital energy (ELUMO) energy gap (∆Egap), dipole moment (μ), total hardness (η), and electronegativity (χ), were studied, and these descriptors were discussed in connection to the experimental inhibitory efficiency. The local reactivity was analyzed through the Fukui function in order to compare the possible sites for nucleophilic and electrophilic attacks. Accordingly, all data obtained using various theoretical calculation techniques were consistent with experiments.


2014 ◽  
Vol 960-961 ◽  
pp. 118-125 ◽  
Author(s):  
Bo Yang ◽  
Wu Chen ◽  
Dan Hua Mu

This paper studies extract as corrosion inhibitors extracted from garlic. The IR spectrum analysis of the extract shows that the main ingredient of extract is amino acids, and the better extracting condition is that 30°C50mL 10%H2SO4and 20g peeled garlic react for 120.0h, and composite amino acids content in the extract is 19.0mg/L. The result of corrosion inhibition performance using static weight loss shows that the dosage of the extract, temperature and concentration of acidic mediums have effect on corrosion inhibition remarkably. The corrosion inhibitive efficiency for A3 steel is 93.26% in 5% Hydrochloric acid and 79.2% in5% mud acid when the dosage of the garlic extract is 4.0%(V/V) and 6.0%(V/V),respectively. The investigated results of electrochemistry performance of the extract indicates that corrosion potential of A3 steel shift in negative direction both in Hydrochloric acid and in mud acid, which indicates that the extract are inhibitors of inhibiting cathodic corrosion, and circular-arc radius of alternating-current impedance spectroscopy increase notably in acidic medium, and corrosion inhibition effect is remarkable. Therefore, it is feasible to extract inhibitors from garlic.


2013 ◽  
Vol 39 (13) ◽  
pp. 1034-1041 ◽  
Author(s):  
Youguo Yan ◽  
Xiao Wang ◽  
Yang Zhang ◽  
Pan Wang ◽  
Jun Zhang

Sign in / Sign up

Export Citation Format

Share Document