Investigations are currently underway to establish effective primary and secondary ballast water treatment methods to minimize the potential for the introduction of additional nonindigenous aquatic species into the Great Lakes and other U.S. coastal waters. This treatment could be used in place of mid-ocean ballast exchange currently required by the U.S. Coast Guard for all vessels entering the Great Lakes in ballast from beyond the Exclusive Economic Zone (EEZ). Primary and secondary treatment could provide environmental protection for both Ballast On Board (BOB) vessels, which are required to perform mid-ocean ballast exchange before entering the Great Lakes, and No Ballast On Board (NOBOB) vessels, which are currently exempt from any ballast exchange requirements. Primary treatment using some form of mechanical separation to 100 urn or 50 um followed by secondary treatment using 254 nm UV irradiation or some form of chemical treatment are currently leading candidates. Over the past six years, the Great Lakes Ballast Technology Demonstration Project (GLBTDP) has undertaken the full-scale evaluation of 340 m3/h (1500 U.S. gpm) ballast water mechanical separation using an automatic backwashing screen filter, hydrocyclone, and automatic backwashing disk filter. This experience provides the basis for the investigation of various ballast system design issues that must be considered in the selection and design of the primary ballast water treatment. This investigation is based upon the ballast system of a typical Seaway size bulk carrier using port and starboard 2000 m3/h (8800 U.S. gpm) main ballast pumps. A discrete multicriterion optimization tradeoff study using the Analytical Hierarchy Process (AHP) is also presented to illustrate a rational method for determining the best choice for primary ballast water treatment for such a Seaway size bulk carrier.
Ballast Water Treatment System JFE BallastAce® - Chemicals Used for Ballast Water Treatment