A gravimetric analysis of protein–oligosaccharide interactions

2003 ◽  
Vol 31 (2) ◽  
pp. 349-351 ◽  
Author(s):  
T. Rudd ◽  
J.T. Gallagher ◽  
D. Ron ◽  
R.J. Nichols ◽  
D.G. Fernig

Interactions between an immobilized, heparin-derived octasaccharide and growth factors have been observed using a quartz crystal microbalance-dissipation (QCM-D). This device can measure the amount of growth factors binding to the octasaccharide surface and also the change of dissipation of the surface. Dissipation is a measure of how the adhered material ‘damps’ the surface vibrations. The octasaccharides were anchored through their reducing ends by the intermediary of the alkanethiol molecule, which covalently binds to the crystal surface through the thiol group. As expected, heparin sulphate binding growth factors bound to the octasaccharide, but the change in mass of growth factor bound per unit change in dissipation is different for the different growth factors. Suggesting that the structures of the various growth factor–octasaccharide complexes are different, therefore, indicates that the change in dissipation can give insights into the structure, orientation and packing of the oligosaccharide-growth factor complexes.

1987 ◽  
Vol 101 ◽  
Author(s):  
Robert L. Jackson ◽  
George W. Tyndall

ABSTRACTA quartz crystal microbalance has been used to measure the rates of focused uv laser-induced deposition from the Group 6 hexacarbonyls in real time. The experimental configuration employs acwuv laser beam focused onto the microbalance crystal surface at normal incidence to deposit material by decomposition of a metal complex vapor. Simple equations are given for determining absolute deposition rates in terms of the total mass deposited per unit time. Kinetic data obtained with this system have been used to study the mechanism of laser photodeposition from Cr(CO)e, Mo(CO)6, and W(CO)é induced by a frequency-doubled argon ion laser. The rate-determining deposition step involves condensation of products formed upon single-photon dissociation of the metal carbonyls in the gas phase. Additional observations indicate that the adsorbed photoproducts undergo further photo-initiated dissociation on the substrate surface.


Author(s):  
Hejian Sun ◽  
John C. Donini ◽  
Kirk H. Michaelian ◽  
Sankara Papavinasam ◽  
R. Winston Revie

The quartz crystal microbalance (QCM) provides an extremely sensitive technique for detecting small changes in mass and viscosity on the quartz crystal surface. QCM can be used in oil, gas or water without the problems of high solution resistance. In order to use QCM to model pipeline corrosion, an iron quartz crystal electrode was prepared using an electrodeposition method. The reproducibility, effectiveness and accuracy of the iron QCM were tested in salt solution. The adsorption of amines was studied to investigate their effects on the corrosion behaviour of the iron QCM.


1985 ◽  
Vol 110 (1_Suppla) ◽  
pp. S74
Author(s):  
R. GÄRTNER ◽  
W. GREIL ◽  
R. DEMHARTER ◽  
K. HORN

Sign in / Sign up

Export Citation Format

Share Document