Electrocatalytic Properties of Ni(II) Schiff Base Complex Polymer Films

Platinum electrodes were modified with polymers of the (±)-trans-N,N′-bis(salicylidene)-1,2-cyclohexanediaminenickel(II) ([Ni(salcn)]) and (±)-trans-N,N′-bis(3,3′-tert-Bu-salicylidene)-1,2-cyclohexanediaminenickel(II) ([Ni(salcn(Bu))]) complexes to study their electrocatalytic and electroanalytical properties. Poly[Ni(salcn)] and poly[Ni(salcn(Bu))]) modified electrodes catalyze the oxidation of catechol, aspartic acid and NO2−. In the case of poly[Ni(salcn)] modified electrodes, the electrocatalysis process depends on the electroactive surface coverage. The films with low electroactive surface coverage are only a barrier in the path of the reducer to the electrode surface. The films with more electroactive surface coverage ensure both electrocatalysis inside the film and oxidation of the reducer directly on the electrode surface. In the films with the most electroactive surface coverage, electrocatalysis occurs only at the polymer–solution interface. The analysis was based on cyclic voltammetry, EQCM (electrochemical quartz crystal microbalance) and rotating disc electrode method.

Deconvoluting and Quantifying the Real-time Fluxes and Ionic Currents of Various Species Using In Situ Electrochemical Quartz Crystal Microbalance Measurements

Electrochemical quartz crystal microbalance (EQCM) is a powerful technique to screen the gravimetric response of electrochemical electrodes. In this study, a straightforward mathematical method is proposed for extracting and deconvoluting the real-time fluxes and ionic currents of two species based on the EQCM measurement results. We creatively propose the concept of flux cyclic voltammograms (CVs) and ionic current CVs of various species and apply them to the real-time analyses of molecules/ions dynamics. For proof of concept, Ti3C2Tx MXene, a most studied two-dimensional metal carbide, is investigated as a supercapacitor electrode in a 1M H2SO4 electrolyte. The H2O and H+ flux CV plots are highly symmetrical, indicating reversible inserting/deserting species fluxes. The highest fluxes along with maximum hydration numbers are obtained at the peak current potential. This suggests the significant contribution of double-layer capacitance originates from the insertion of hydrated H+. The H+ CV with the ionic current induced by H+ flux overlaps the real CV, confirming that H+ is the only interactive ion for screening the electrode charge. Lastly, we also validate the proposed strategy using Ti3C2Tx MXene electrode in 1M KCl electrolyte and YP80 porous carbon electrode in 1 M LiCl electrolyte.

Preparation of Ultrathin and Degradable Polymeric Films by Electropolymerization of 3-Amino-L-Tyrosine

The resource intensive and environmentally unfriendly synthesis, recycling and disposal of today’s plastics has sparked interest in greener polymer processing. Bioderived polymers are one of many current areas of research that show promise for a sustainable future. One bioderived polymer that has been in the spotlight for the past decade due to its unique properties is polydopamine (PDA). Its ability to adhere to virtually any surface showing high stability in a wide pH range from 2-10 and in several organic solvents makes it a suitable candidate for several applications ranging from medical devices, coatings to biosensing applications. However, its strong and broad light absorption limits many applications that rely on transparent material, moreover fluorescence applications are limited by the high quenching efficiency of PDA. Therefore, new bioderived polymers that share similar features as PDA without fluorescent quenching are highly desirable. In this study, the electropolymerization of a bioderived analogue of dopamine, 3-amino-L-tyrosine (ALT) is demonstrated. The properties of the resultant polymer, poly-amino-L-tyrosine (p-ALT), exhibit several characteristics complementary to or even exceeding those of PDA and of its analog, poly-norepinephrine (p-NorEp), rendering p-ALT attractive for the development of sensors and photoactive devices. Cyclic voltammetry, spectroelectrochemistry and electrochemical quartz crystal microbalance have been applied to study the electrodeposition of this material and the resulting polymeric films have been compared to PDA and p-NorEp. Impedance spectroscopy revealed increased ions permeability of p-ALT with respect PDA and p-NorEp. Moreover reduced fluorescence quenching of p-ALT film was achieved supporting its application as coating for biosensors, organic semiconductors and new nanocomposite materials.

Colorless-to-colorful switching of electrochromic MXene by reversible ion insertion

Electrochromic (EC) materials that change color with voltage have been widely studied for use in dynamic windows. However, colorless-to-colorful switching with high contrast ratio is generically unattainable, especially for colorless-to-black electrochromic materials with an ultrahigh contrast ratio over the entire visible region. In this work, we developed Nb1.33C MXene-based dynamic windows with colorless-to-black switching of up to 75% reversible change in transmittance from 300 to 1,500 nm. By exploring the electrochromic effects of different electrolytes through in situ optical changes and electrochemical quartz crystal microbalance (EQCM), it is found that electrochromic behavior is greatly influenced by the extent of reversible Li+ insertion/deinsertion between the two-dimensional Nb1.33C MXene nanosheets. In addition, a colorless-to-black EC device based on Nb1.33C with an overall integrated contrast ratio over 80% was successfully constructed by a solution-processable spin coating method. This work enables a simple route to fabricate MXene-based high-performance electrochromic smart windows, which is important for further expanding the application of MXenes to optoelectronic and photonic applications.

Formation of lithiated gold and its use for the preparation of reference electrodes — an EQCM study

Lithiated gold wires can be used to build reference electrodes with outstanding potential stabilities over several days and even over the course of one year. These electrodes are well suited for investigations in the context of lithium-ion batteries (LIBs). In this work, a detailed procedure for the preparation of such electrodes with tailored mechanical properties, which can be fitted gastight into electrochemical cells using commercially available fittings, is given. The electrochemical lithiation process is studied using the electrochemical quartz crystal microbalance (EQCM) technique, and the differences in lithiation of wire type and thin film type gold electrodes are discussed. All experiments were carried out with two different electrolytes, namely, a LiPF6 and a lithium bis(trifluoromethane sulfonyl) imide (LiTFSI)-based electrolyte, and we conclude that for a higher lithiation rate and long-term stability, the use of LiTFSI-based electrolyte in the preparation phase is beneficial. The EQCM data provides a better insight in the analysis of film formation processes, like the buildup of the solid electrolyte interphase (SEI) during the lithiation, the rate of deposition of metallic lithium, or additional information on the kinetics of Li-Au alloy formation.