scholarly journals Method for calculating the groundwater inflow into pit when mining the placer deposits by dredger

2019 ◽  
Vol 123 ◽  
pp. 01025 ◽  
Author(s):  
Borys Sobko ◽  
Anatolii Haidin ◽  
Oleksii Lozhnikov ◽  
Jacek Jarosz

The research aims to increase the performance efficiency of hydromechanization equipment under the conditions of pit operation of the Motronivskyi Mining and Concentrating Plant by determining the dynamics of change in the water level in the mine workings when developing the overburden rocks and mineral. It has been generalized the world experience of determining the groundwater inflows into mine workings, which are mined by means of hydromechanization equipment. The methods have been developed for calculating the underground water inflow into the pit reservoir, when mining the placer ores by hydromechanization equipment. It has been proved that the dredger work in the conditions of the Motronivskyi MCP pit is possible without external source of water supply. The research results in determining the influence of underwater mining of overburden rocks and ore by dredger for decreasing the water level and its subsequent recovery in the reservoir of the Motronivskyi MCP pit, allow to develop a mode of mining operations without an external source of water supply. The dynamics of water level fluctuations in mine working during the working week have been established. The research results have shown that the dredger, taking into account the technical characteristics, can continuously operate for 9.5 days under the conditions of underground water inflow into the Motronivskyi MPP pit. It has also been established that after the dredging of the overburden rocks is stopped, the level of water in the pit for 2.5 days will recover.

2020 ◽  
Vol 201 ◽  
pp. 01040
Author(s):  
Arstanbek Abdiev ◽  
Rakhat Mambetova ◽  
Aziz Abdiev ◽  
Sher Abdiev

This paper studies the rock mass stress state under highland conditions, depending on the geological structure of a particular rock mass area, the tectonic field of stresses and the region relief. This study is aimed to develop an experimental method for assessing and monitoring the properties and state of the rock mass adjacent to mine workings. Experimental studies are performed through stresses measurements in-situ. Based on research results, it has been revealed that the geological structures, tectonic fields of stresses and the earth’s surface relief of the deposit normally reflect the values and direction of the main stresses acting in the mass. These patterns can be used to predict and assess the stress state of the rock mass. During the mass stress state assessment, quantitative dependences have been obtained for determining the stress tensors conditioned by the overlying rocks weight, tectonics and fracturing, and the deposit surface relief The research results make possible to assess the nature of the stresses distribution, to identify the areas of reduced, equal, increased and maximum stresses concentration of the virgin mass, as well as to increase the efficiency of the geoacoustic control developed by the authors for the state of the mass adjacent to mine working. According to the new patterns and dependences obtained, the values and directions have been scientifically determined of the main stresses action, as well as the zones of stresses manifestation. These patterns and dependences are valuable for designing and planning the development of mining operations.


2020 ◽  
Vol 305 ◽  
pp. 00040
Author(s):  
Maria Lazăr ◽  
Florin Faur ◽  
Izabela Maria Apostu

Flooding the residual gaps of former lignite open pits is often applied worldwide, offering opportunities for the use of the lake and the reclaimed land, as well as many benefits, ranging from the restoration of ecosystems to the development of the local economy. The flooding process is conditioned by the available quantities of water from natural and/or artificial sources. Flooding can be done either by natural methods (underground water inflow plus intake of water from rainfall and superficial drainage), or by natural and artificial methods (water adductions from superficial collectors). Unlike artificial flooding, natural flooding has the advantage of reduced costs, but it is a long-lasting process. Depending on the flooding speed, as a result of rising water level and saturation of rocks from the final slopes, geotechnical phenomena such as landslides may occur. The paper aims at establishing the dependence between the rhythm of raising the water level in the lake and the geotechnical behavior of the rock in the internal dump. Depending on this, there is a need to accelerate the flooding process through adductions, as the hydrostatic pressure manifested on the final slopes determines the increase of their stability reserve.


Author(s):  
Fatih Üneş ◽  
Mustafa Demirci ◽  
Yunus Ziya Kaya ◽  
Eyup Ispir ◽  
Mustafa Mamak

Water resources managers can benefit from accurate prediction of the availability of groundwater. Ground water is a major source of water in Turkey for irrigation, water supply and industrial uses. The ground water level fluctuations depend on several factors such as rainfall, temperature, pumping etc. In this study, Hatay Amik Plain, Kumlu region was evaluated using Autoregressive (AR) and Support Vektor Machines (SVMs) methods. The monthly groundwater level was used the previous years data belonging to the Kumlu region.


Author(s):  
Krum Videnov ◽  
Vanya Stoykova

Monitoring water levels of lakes, streams, rivers and other water basins is of essential importance and is a popular measurement for a number of different industries and organisations. Remote water level monitoring helps to provide an early warning feature by sending advance alerts when the water level is increased (reaches a certain threshold). The purpose of this report is to present an affordable solution for measuring water levels in water sources using IoT and LPWAN. The assembled system enables recording of water level fluctuations in real time and storing the collected data on a remote database through LoRaWAN for further processing and analysis.


Sign in / Sign up

Export Citation Format

Share Document