scholarly journals Dynamic inverse controller with Matrix Converter Drive Feed Three Phase Induction Motor

2018 ◽  
Vol 225 ◽  
pp. 02022 ◽  
Author(s):  
Settar S Keream ◽  
Ahmed N Abdalla ◽  
Mohd Razali Bin Daud ◽  
Johnny Koh
Keyword(s):  
Induction Motor ◽  
Input Voltage ◽  
Torque Ripple ◽  
Matrix Converter ◽  
Motor Drives ◽  
Voltage Source ◽  
Three Phase ◽  
Sinusoidal Input ◽  
Converter Topologies ◽  
Dynamic Inverse

Dynamic inversion (DI) is a controller technique by which existing undesirable dynamics are cancelled out and changed by desirable dynamics. The application of induction motor drives with sinusoidal input currents a matrix converter combined with DI is used which directly connects a three-phase input voltage source to a three-phase (AC-AC converter) without dc-link components. This paper presents a novelty of using nonlinear dynamic inverse controller with matrix converter topologies on three phase induction motor. The efficiency of the converter and their modulation techniques for the implementation of the strategies is increased. The speed response tracking and torque ripple minimization is achieved. The robustness of the proposed method has been confirmed from simulation and experimental model.

scholarly journals A PV FED Three Phase Switched Z-source Multi Level Inverter for Induction Motor Drives

2018 ◽  
Vol 9 (1) ◽  
pp. 24
Author(s):  
Sinu KJ ◽  
G. Ranganathan
Keyword(s):  
Induction Motor ◽  
Motor Drives ◽  
Multilevel Inverter ◽  
Voltage Source ◽  
Switching Frequency ◽  
Induction Motor Drives ◽  
Line Voltage ◽  
Voltage Source Inverters ◽  
High Switching Frequency ◽  
Three Phase

<p>Generally induction motor drives posses higher harmonic contents in line voltage and current due to high switching frequency used in inverters. Conventional induction motor drives employ two level voltage source inverters which has THD in level of 50%. This paper presents a switched z-source multilevel inverter which has voltage boosting capability and has lesser THD level in comparison with conventional two level voltage source inverters. This drive is fed from a photo voltaic source because of its voltage boosting capability. A single phase five level switched z-source inverter is initially designed and considered as single cell and three such cells are created for powering three phase induction motor. The proposed three cell PV source switched z-source multilevel inverter for three phase induction motor is simulated in MATLAB/Simulink software to verify merits of proposed IM drive</p>

Evaluation of voltage source IGBT converters for three-phase induction motor drives

2011 ◽  
Vol 3 (6) ◽  
pp. 561
Author(s):  
Chris S. Edrington ◽  
Oleg Vodyakho ◽  
Fletcher Fleming ◽  
Sardis Azongha ◽  
Mahesh Krishnamurthy
Keyword(s):  
Induction Motor ◽  
Motor Drives ◽  
Voltage Source ◽  
Induction Motor Drives ◽  
Three Phase

FPGA Based V/f Control of Three Phase Induction Motor Drives Integrating Super-Lift Luo Converter

2015 ◽  
Vol 5 (3) ◽  
pp. 393
Author(s):  
Elangovan P ◽  
Nalin Kant Mohanty
Keyword(s):  
Induction Motor ◽  
Pulse Width Modulation ◽  
Open Loop ◽  
Motor Drives ◽  
Voltage Source ◽  
Voltage Level ◽  
Three Phase ◽  
Control Scheme ◽  
Field Programmable ◽  
Sinusoidal Pulse Width Modulation

The significance of Elementary Positive Output Super-Lift Luo Converter (EPOSLLC) in constant Voltage/Hertz (V/f) controlled Induction Motor (IM) drive is presented. The traditional IM drive which integrates phase controlled rectifier or boost converter in the facade end upshot tribulations like DC link fluctuations and deprived DC link voltage level. To overcome the problem, the conventional DC-DC converter is replaced with Proportional plus Integral (PI) controlled EPOSLLC in the front end of IM drive that produce the DC link voltage in geometric progression. The Voltage Source Inverter (VSI) of the suggested system renders both open loop and closed loop V/f control scheme for IM by feedback regulated Sinusoidal Pulse Width Modulation (SPWM) technique. Simulation and experimental works are conceded and results presented to demonstrate the viability of the proposed approach. Simulation is carried out using MATLAB /SIMULINK software and the experimental setup is built with Field Programmable Gate Array (FPGA) Spartan-6 processor. The anticipated EPOSLLC is found fit for V/f controlled IM drives considering the DC link Voltage, Speed response of IM and Total Harmonic Distorion (THD) in IM current.

A Tactical Chaos based PWM Technique for Distortion Restraint and Power Spectrum Shaping in Induction Motor Drives

2015 ◽  
Vol 5 (3) ◽  
pp. 383 ◽  
Author(s):  
V. Mohan ◽  
N. Stalin ◽  
S. Jeevananthan
Keyword(s):  
Induction Motor ◽  
Pulse Width ◽  
Pulse Width Modulation ◽  
Harmonic Distortion ◽  
Torque Ripple ◽  
Motor Drives ◽  
Voltage Source ◽  
Switching Frequency ◽  
Induction Motor Drives ◽  
Current Harmonics

The pulse width modulated voltage source inverters (PWM-VSI) dominate in the modern industrial environment. The conventional PWM methods are designed to have higher fundamental voltage, easy filtering and reduced total harmonic distortion (THD). There are number of clustered harmonics around the multiples of switching frequency in the output of conventional sinusoidal pulse width modulation (SPWM) and space vector pulse width modulation (SVPWM) inverters. This is due to their fixed switching frequency while the variable switching frequency makes the filtering very complex. Random carrier PWM (RCPWM) methods are the host of PWM methods, which use randomized carrier frequency and result in a harmonic profile with well distributed harmonic power (no harmonic possesses significant magnitude and hence no filtering is required). This paper proposes a chaos-based PWM (CPWM) strategy, which utilizes a chaotically changing switching frequency to spread the harmonics continuously to a wideband and to reduce the peak harmonics to a great extent. This can be an effective way to suppress the current harmonics and torque ripple in induction motor drives. The proposed CPWM scheme is simulated using MATLAB / SIMULINK software and implemented in three phase voltage source inverter (VSI) using field programmable gate array (FPGA).

scholarly journals Remote-State PWM with Minimum RMS Torque Ripple and Reduced Common-Mode Voltage for Three-Phase VSI-Fed BLAC Motor Drives

Electronics ◽  
2020 ◽  
Vol 9 (4) ◽  
pp. 586 ◽  
Author(s):  
Jaehyuk Baik ◽  
Sangwon Yun ◽  
Dongsik Kim ◽  
Chunki Kwon ◽  
Jiyoon Yoo
Keyword(s):  
Pulse Width Modulation ◽  
Torque Ripple ◽  
Motor Drives ◽  
Voltage Source ◽  
Common Mode ◽  
Voltage Source Inverters ◽  
Common Mode Voltage ◽  
Voltage Vector ◽  
Three Phase ◽  
Current Ripple

A minimum root mean square (RMS) torque ripple-remote-state pulse-width modulation (MTR-RSPWM) technique is proposed for minimizing the RMS torque ripple under reduced common-mode voltage (CMV) condition of three-phase voltage source inverters (VSI)-fed brushless alternating current (BLAC) motor drives. The q-axis current ripple due to an error voltage vector generated between the reference voltage vector and applied voltage vector is analyzed for all pulse patterns with reduced CMV of the RSPWM. From the analysis result, in the MTR-RSPWM, a sector is divided into five zones, and within each zone, pulse patterns with the lowest RMS torque ripple and reduced CMV are employed. To verify the validity of the MTR-RSPWM, theorical analysis, simulation, and experiments are performed, where the MTR-RSPWM is thoroughly compared with RSPWM3 that generates the minimum RMS current ripple. From the analytical, simulation, and experimental results, it is shown that the MTR-RSPWM significantly reduces the RMS torque ripple under a reduced CMV condition at the expense of an increase in the RMS current ripple, compared to the RSPWM3.

scholarly journals Hybrid Three-Phase Rectifiers with Active Power Factor Correction: A Systematic Review

Electronics ◽  
2021 ◽  
Vol 10 (13) ◽  
pp. 1520
Author(s):  
José Teixeira Gonçalves ◽  
Stanimir Valtchev ◽  
Rui Melicio ◽  
Alcides Gonçalves ◽  
Frede Blaabjerg
Keyword(s):  
Power Factor ◽  
Power Distribution ◽  
Harmonic Distortion ◽  
International Standards ◽  
Pwm Converter ◽  
High Power Factor ◽  
Three Phase ◽  
Sinusoidal Input ◽  
Converter Topologies ◽  
Future Direction

The hybrid three-phase rectifiers (HTR) consist of parallel associations of two rectifiers (rectifier 1 and rectifier 2), each one of them with a distinct operation, while the sum of their input currents forms a sinusoidal or multilevel waveform. In general, rectifier 1 is a GRAETZ (full bridge) (can be combined with a BOOST converter) and rectifier 2 is combined with a DC-DC converter. In this HTR contest, this paper is intended to answer some important questions about those hybrid rectifiers. To obtain the correct answers, the study is conducted as an analysis of a systematic literature review. Thus, a search was carried out in the databases, mostly IEEE and IET, and 34 papers were selected as the best corresponding to the HTR theme. It is observed that the preferred form of power distribution in unidirectional hybrid three-phase rectifiers (UHTR) is 55%Po (rectifier 1) and 45%Po (rectifier 2). For the bidirectional hybrid three-phase rectifiers (BHTR), rectifier 1 preferably takes 90% of Po and 10% of Po is processed by rectifier 2. It is also observed that the UHTR that employ the single-ended primary-inductor converter (SEPIC) or VIENNA converter topologies in rectifier 2 can present sinusoidal input currents with low total harmonic distortion (THD) and high Power Factor (PF), even successfully complying with the international standards. The same can be said about the rectifier that employs a pulse-width (PWM) converter of BOOST topology in rectifier 2. In short, the HTR are interesting because they allow using the GRAETZ full bridge topology in rectifier 1, thus taking advantage of its characteristics, being simple, robust, and reliable. At the same time, the advantages of rectifier 2, i.e., high PF and low THD, are well used. In addition, this article also points out the future direction of research that is still unexplored in the literature, thus giving opportunities for future innovation.

Sign in / Sign up

Export Citation Format

Share Document