Radiographic Outcomes following K-Wire Augmentation of Dorsal Spanning Plate Fixation for Intra-Articular Fractures of the Distal Radius

2021 ◽  
Author(s):  
Harsh A. Shah ◽  
Anthony R. Martin ◽  
Joseph S. Geller ◽  
Hariharan Iyer ◽  
Seth D. Dodds
Keyword(s):  
Distal Radius ◽  
Articular Surface ◽  
Plate Fixation ◽  
Distal Radius Fractures ◽  
Radius Fractures ◽  
Surface Alignment ◽  
Radiographic Outcomes ◽  
Wire Fixation ◽  
Polytrauma Patients

Abstract Background Restoration of articular surface alignment is critical in treating intra-articular distal radius fractures. Dorsal spanning plate fixation functions as an internal distraction mechanism and can be advantageous in the setting of highly comminuted fracture patterns, polytrauma patients, and patients with radiocarpal instability. The addition of K-wires to support articular surface reduction potentially augments fracture repair stability. Questions/Purposes We examined the radiographic outcomes and maintenance of reduction in patients with comminuted intra-articular distal radius fractures treated with K-wire fixation of articular fragments followed by dorsal spanning plate application. Patients and Methods We reviewed 35 consecutive patients with complex intra-articular distal radius fractures treated with dorsal spanning plate and K-wire fixation between April 2016 and October 2019. AO classification was recorded: B1 (3), B3 (2), C2 (2), C3 (28). A two-tailed paired t-test was used to compare findings immediately post-dorsal spanning plate surgery and at final follow-up after dorsal spanning plate removal. Results Mean patient age was 43.3 years (19–78 years). Mean follow-up was 7.8 months (SD 4.3 months) from surgery and 2.5 months from pin removal (SD 2.6 months). All patients achieved radiographic union. Radial height (mean interval change (MIC) 0.2 mm, SD 2.2, p = 0.63), articular step-off (MIC 0.1 mm, SD 0.6 mm, p = 0.88), and radial inclination (MIC −1.1 degrees, SD 3.7 degrees, p = 0.10) did not change from post-surgery to final follow-up. Ulnar variance (MIC −0.9 mm, SD 2.0 mm, p = 0.02) and volar tilt (MIC −1.5 degrees, SD 4.4 degrees, p = 0.05) were found to have decreased. Conclusion Dorsal spanning plate augmented with K-wire fixation for comminuted intra-articular distal radius fractures in polytrauma patients allows for immediate weightbearing and maintains articular surface alignment at radiographic union and may provide better articular restoration than treatment with dorsal spanning plate alone. Level of Evidence This is a Level IV, therapeutic study.

Distal Radius Fracture Treatment Outcomes in Patients With Ipsilateral Hemiplegia or Hemiparesis

Hand ◽  
2021 ◽  
pp. 155894472199973
Author(s):  
Nicholas Munaretto ◽  
Adam Tagliero ◽  
Raahil Patel ◽  
Peter C. Rhee
Keyword(s):  
Distal Radius Fracture ◽  
Distal Radius ◽  
Case Series ◽  
Distal Radius Fractures ◽  
Radius Fracture ◽  
Functional Classification ◽  
Radius Fractures ◽  
Radiographic Outcomes ◽  
Ipsilateral Hemiparesis

Background Little information exists to guide decision-making with regard to distal radius fractures in the setting of ipsilateral hemiparesis or hemiplegia. Methods Patients who sustained a distal radius fracture in the setting of ipsilateral hemiparesis or hemiplegia secondary to brain injury were evaluated. Investigated variables included perioperative pain, preinjury House functional classification score, length of immobilization, radiographic outcome measurements, and time to union. Results There were 15 patients with distal radius fractures with a mean age of 65.9 years. The mean clinical and radiographic follow-up was 2.8 and 2.9 years, respectively. Wrists were placed into the nonoperative group (NOG, n = 10) and operative group (OG, n = 5). Pain significantly decreased at final follow-up for both groups. Baseline House functional classification scores averaged 1.3 and 1.6 for the NOG and OG, respectively, and were maintained at final follow-up. Length of immobilization for the NOG was 46 days and OG was 37 days, P = .15. Radiographic outcomes at final follow-up in the NOG and OG, respectively, were a mean radial height of 9.3 versus. 11.6 mm, radial inclination of 18.3° versus 22.3°, 4.2° dorsal tilt versus 5.3° volar tilt, and tear drop angle of 45.6° versus 44.5°. There were no significant differences in these measurements. Time to radiographic union averaged 58 days for the NOG and 67 days for the OG, P = .42. There were no revision surgeries. Conclusions Based on this small case series, patients with distal radius fracture and ipsilateral hemiparesis or hemiplegia may have similar clinical, functional, and radiographic outcomes, regardless of nonoperative or operative treatment.

145 Outcomes of Unstable Distal Radius Fractures – A Meta-Analysis of Bridging External Fixation Versus Volar Plating

2021 ◽  
Vol 108 (Supplement_2) ◽  
Author(s):  
J Mulrain ◽  
K Joshi ◽  
F Doyle ◽  
A Abdulkarim
Keyword(s):  
External Fixation ◽  
Distal Radius ◽  
Plate Fixation ◽  
Meta Analysis ◽  
Distal Radius Fractures ◽  
Complication Rates ◽  
Volar Plating ◽  
Radius Fractures ◽  
Increased Risk

Abstract Introduction Distal radius fractures are common and trends for fixation have changed with increased use of volar locking plates in recent time. A meta-analysis will summarise the best evidence for treatment. Method A systematic review was conducted using PRISMA methodology to identify studies that reported clinical and/or radiological outcomes in patients with AO type C distal radius fractures when treated with external fixation versus ORIF. Results 10 randomised trials were included in this review, reporting on 967 patients. Clinical outcomes are in favour of volar plating at 3 months post-operation, but no difference between the two groups is seen at 6 or 12 months. Analysis of complication rates shows a minute increase in risk-ratio for volar plating versus external fixation. Subgroup analysis showed significantly higher re-operations after plate fixation and significantly higher infection after external fixation. Conclusions Internal fixation of complex distal radius fractures confers an improved clinical outcome at early follow up only and a minimally increased risk of complications. The improved grip strength with volar plating is only superior at early follow up and no long-term superiority is seen with either intervention. The type of surgery in this injury type therefore remains at the surgeon’s consideration on a case-by-case basis.

scholarly journals The treatment of distal radius fractures accompanying dorsally displaced free fragments beyond the watershed line with turning radius and distal volaris radius system plate fixation via the distal palmar approach

2020 ◽  
Author(s):  
Zhaofeng Jia ◽  
Shijin Wang ◽  
Wei Jiang ◽  
Chuangli Li ◽  
Jiandong Lin ◽  
...  
Keyword(s):  
Distal Radius ◽  
Plate Fixation ◽  
Postoperative Recovery ◽  
Distal Radius Fractures ◽  
Therapeutic Effects ◽  
Dash Score ◽  
Radius Fractures ◽  
X Ray ◽  
Palmar Approach

Abstract Background: Although distal radius fractures (DRFs) are clinically common, DRFs accompanied by dorsally displaced free fragments beyond the watershed line are much less so. At present, it is very difficult to fix and stabilize the displaced free fragments far away from the watershed line with a plate. Our aim was to investigate the clinical effect of DRFs with distally displaced dorsal free mass treated with distal volaris radius (DVR) combined with turning of the radius via the distal palmar approach. Methods: From 2015 to 2019, 25 patients with distal radius fractures associated with dorsally displaced free fragments beyond the watershed line were selected and treated with distal volaris radius (DVR) combined with turning of the radius via the distal palmar approach. This study involved 14 males and 11 females, with an average age of 34.5 years (ranging from 21 to 50 years). The mean follow-up period was 16.5 months (ranging from 12 to 22 months). The dorsal displacement of the free fragments was analyzed by X-ray and three-dimensional computed tomography, allowing characterization of postoperative recovery effects by radial height, volar tilt and radial inclination. For the follow-up, we evaluated effects of the surgery by analyzing range of motion (ROM); Modified Mayo Wrist Score (MMWS); and Disabilities of Arm, Shoulder and Hand (DASH) score. Postoperative wound recovery and complications were also monitored to evaluate the clinical therapeutic effects of the surgical procedures. Results: X-ray showed that all patients showed reduced fractures, well-healed wounds and recovered function with no obvious complications. Based on the follow-up, patients had a mean radial height of 10.5mm (ranging from 8.1 to 12.6 mm), mean MMWS of 78.8° (ranging from 61 to 90°), mean DASH score of 16.25 (ranging from 11 to 21), mean ROM for volar flexion of 76.5° (ranging from 62 to 81°), mean ROM for dorsiflexion of 77.1° (ranging from 59 to 83) and mean VAS score of 1.4 (ranging from 1 to 3). Conclusion: Treatment of distal radius fractures with accompanying dorsally displaced free fragments beyond the watershed line with turning of the radius and the DVR plate system via the distal palmar approach is effective and has no obvious complications.

Comparison of Five Years Clinical and Radiological Outcomes between Progressive and Non-Progressive Wrist Osteoarthritis after Volar Locking Plate Fixation of Distal Radius Fractures

2019 ◽  
Vol 24 (01) ◽  
pp. 30-35 ◽  
Author(s):  
Takeshi Katayama ◽  
Hiroshi Ono ◽  
Shohei Omokawa
Keyword(s):  
Clinical Outcomes ◽  
Distal Radius ◽  
Locking Plate ◽  
Plate Fixation ◽  
Distal Radius Fractures ◽  
Volar Locking Plate ◽  
Wrist Flexion ◽  
Radius Fractures ◽  
Locking Plate Fixation

Background: This study aimed to identify the effect of the progression of postoperative wrist osteoarthritis on 5 years clinical and radiological outcomes after volar locking plate fixation of distal radius fractures. Methods: Altogether, 56 patients with distal radius fractures were followed up 5 years after surgery. Clinical assessment was performed using the Mayo modified wrist score, a visual analogue scale of pain, the Japanese version of the Disabilities of the Arm, Shoulder, and Hand score, and Patient-related wrist evaluation. Standardized wrist radiographs were used to assess wrist morphology and the Knirk and Jupiter’s degree of osteoarthritis. Multivariate logistic regression was used to analyze postoperative morphological changes in the wrist and carpal alignment regarding their correlation with progression of wrist osteoarthritis. Results: Progression of postoperative wrist osteoarthritis was recognized in 37 of the 56 cases (66.1%). Compared with the clinical outcomes at the time of the fracture union completion, almost clinical outcomes improved up to 5 years follow-up time as well as at 1 year after surgery. The range of wrist flexion at 5 years follow-up was significantly less in the progressive osteoarthritis group than in those with non-progressive osteoarthritis. The persistent step-off immediately after surgery significantly affected the postoperative progression of wrist osteoarthritis. Changes in the radial inclination, volar tilt, and radioscaphoid angle correlated with progression of wrist osteoarthritis. The highest correlation was with the change of radioscaphoid angle. Conclusions: Good clinical results were maintained at 5 years after surgery, but progression of postoperative wrist osteoarthritis interfered with improvement of wrist flexion. Change in the radioscaphoid angle was the factor that was most highly correlated with progression of postoperative wrist osteoarthritis.

scholarly journals Correlation of Flexor Pollicis Longus Tendon Status by Ultrasonography with Plate Position on Radiographs Following Volar Plate Fixation of Distal Radius Fractures with Pronator Quadratus Repair

2021 ◽  
Author(s):  
Anil. K. Bhat ◽  
Ashwath. M. Acharya ◽  
Prajwal P. Mane ◽  
Lakshmikanth. H. Karegowda
Keyword(s):  
Distal Radius ◽  
Plate Fixation ◽  
Distal Radius Fractures ◽  
Flexor Pollicis Longus ◽  
Radius Fractures ◽  
Pronator Quadratus ◽  
Longus Tendon ◽  
Flexor Pollicis Longus Tendon ◽  
Grade One

Abstract Background Purpose was to correlate flexor pollicis longus tendon (FPL) attrition using Ultrasonography with plate position on radiographs following volar locked compression plate fixation (LCP) in patients who have undergone pronator quadratus (PQ) repair for distal radius fractures. Methods Status of flexor pollicis longus tendon was analyzed by ultrasonography in patients who underwent volar locked compression plating with pronator quadratus repair at a minimum of one year follow up. Soong’s criteria was used to assess the plate position and then correlated the ultrasonography findings of flexor pollicis longus. Results There were 33 patients included in our study, of which 15 belonged to Soong’s grade zero, 10 were grade one and eight were grade two. Flexor pollicis longus attrition was noted in all cases with grade two plating. Conclusion Pronator quadratus repair may not prevent attritional changes in higher grades of Soong’s, hence follow up may be required in these patients to identify attritional changes and early implant removal to prevent complications.

scholarly journals Volar Locking Plating for the Intra- and Extra-articular Distal Radius Fractures With Dorsal Metaphyseal Comminution

2021 ◽  
Author(s):  
Xue-yang Gui ◽  
Zhao-hui Cheng ◽  
Hongfei Shi ◽  
Yi-xin Chen ◽  
Jin Xiong ◽  
...  
Keyword(s):  
Distal Radius ◽  
Locking Plate ◽  
Plate Fixation ◽  
Distal Radius Fractures ◽  
Volar Locking Plate ◽  
Radius Fractures ◽  
Locking Plate Fixation ◽  
Articular Fractures ◽  
Metaphyseal Comminution

Abstract Background: Volar locking plating remains a popular method for the surgical management of distal radius fractures. Dorsal metaphyseal comminution (DMC) is a common fracture pattern which weakens the stability during fracture fixation. In this study, we aimed to compare the radiographic and functional outcome of the intra- and extra-articular distal radius fractures with DMC following volar locking plate fixation.Materials and methods: Patients suffered from a distal radius fracture with DMC were reviewed in the clinical database of the authors’ institution between Jan 2016 and Jan 2020. The included patients were classified into the extra-articular (A3) group or the intra-articular (C2 and C3) group according to the AO/OTA system. The radiological parameters, wrist range of motion, and functional outcomes were evaluated following open reduction and volar locking plate fixation.Results: A total of 130 patients were included in this study with a mean follow-up length of 17.2 months. Compared with the A3 fracture group, no significant fracture re-displacement or reduced wrist ROMs was observed in the C2 fractures after 12-month’s follow-up. However, significantly decreased volar tilt (P = 0.003) as well as the extension/flexion ROMs were observed in the C3 fractures comparing to the A3 fractures. Most of the patients achieved an excellent (n = 75) or good (n = 51) Gartland and Werley wrist score. Four patients with C3 fractures resulted in a fair functional outcome due to a significant loss of volar tilt during follow-up.Conclusions: The volar locking plate fixation provided sufficient stability for distal radius fractures with DMC, and resulted in similar radiological and functional outcomes in the intra-articular distal radius fractures with a simple articular component (C2 fractures) as those in the extra-articular fractures. Considering the intra-articular fractures with multifragmentary articular component (C3 fracture), despite of the subsequent loss of volar tilt, the majority of the patients achieved good to excellent wrist function following volar locking plating.Trial registration: Not applicable because the design of the study is retrospective.

scholarly journals Intra articular distal radius fractures and volar plate fixation: a prospective study

2017 ◽  
Vol 3 (3) ◽  
pp. 589 ◽  
Author(s):  
Atin Kumar Kundu ◽  
Nitin Wale ◽  
Satyendra Phuljhele ◽  
Deepak Ghritlahre ◽  
Harjot Singh Gurudatta
Keyword(s):  
Distal Radius ◽  
Plate Fixation ◽  
Fracture Pattern ◽  
Distal Radius Fractures ◽  
Volar Plate ◽  
Radius Fractures ◽  
Range Of Movement ◽  
Volar Approach ◽  
Volar Plate Fixation

<p class="abstract"><strong>Background:</strong> Despite being one of the most common fractures encountered in patients, intra-articular distal radius fractures still pose therapeutic challenge to Orthopaedic surgeons. With the advent of locking plates, the fixation of these fractures has been made better, specifically by fixed angle volar locking plate. This study investigates the efficacy of these plates using volar approach, functional and clinical outcome, in addition to the radiological alignment.</p><p class="abstract"><strong>Methods:</strong> Thirty patients with closed distal radius fractures, with AO TYPE B3, B4, AND C fracture pattern, operated with distal radius plate fixation using volar approach, were included in the study during the period of August 2014 to August 2016. With a minimum follow up of six months, radiological outcome was analysed and functional outcome recorded (Gartland and Werley’s demerit scoring system).<strong></strong></p><p class="abstract"><strong>Results:</strong> With a mean age of 42 years and follow up of six months, the range of movement of the wrist was very satisfactory, and the mean grip strength was 80% of the opposite wrist. Radiological parameters were well‑maintained, and functional parameters by Gartland and Werley showed a significant improvement in most of the patients during the follow‑up period. The complication rate was less and insignificant.</p><p class="abstract"><strong>Conclusions:</strong> Primary volar plate fixation of intraarticular distal radius fracture provides a stable construct that helps in early mobilization, thereby better functional outcomes and minimizes chances of delayed/malunion.</p>

scholarly journals Radiographic Outcomes of Dorsal Distraction Distal Radius Plating for Fractures With Dorsal Marginal Impaction

Hand ◽  
2017 ◽  
Vol 13 (3) ◽  
pp. 346-349 ◽  
Author(s):  
Eric G. Huish ◽  
John G. Coury ◽  
Mohamed A. Ibrahim ◽  
Marc A. Trzeciak
Keyword(s):  
External Fixation ◽  
Distal Radius ◽  
Distal Radius Fractures ◽  
Volar Plating ◽  
Radius Fractures ◽  
Plate Removal ◽  
Radiographic Outcomes ◽  
Study Results ◽  
Marginal Impaction

Background: The purpose of this study is to compare radiographic outcomes of patients treated with dorsal spanning plates with previously reported normal values of radiographic distal radius anatomy and compare the results with prior publications for both external fixation and internal fixation with volar locked plates. Methods: Patients with complex distal radius fractures including dorsal marginal impaction pattern necessitating dorsal distraction plating at the discretion of the senior authors (M.A.T. and M.A.I.) from May 30, 2013, to December 29, 2015, were identified and included in the study. Retrospective chart and radiograph review was performed on 19 patients, 11 male and 8 female, with mean age of 47.83 years (22-82). No patients were excluded from the study. Results: All fractures united prior to plate removal. The average time the plate was in place was 80.5 days (49-129). Follow-up radiographs showed average radial inclination of 20.5° (13.2°-25.5°), radial height of 10.7 mm (7.5-14 mm), ulnar variance of −0.3 mm (−2.1 to 3.1 mm), and volar tilt of 7.9° (−3° to 15°). One patient had intra-articular step-off greater than 2 mm. Conclusions: Dorsal distraction plating of complex distal radius fractures yields good radiographic results with minimal complications. In cases of complex distal radius fractures including dorsal marginal impaction where volar plating is not considered adequate, a dorsal distraction plate should be considered as an alternative to external fixation due to reduced risk for infection and better control of volar tilt.

Sign in / Sign up

Export Citation Format

Share Document