Liquid-crystal metasurfaces: Self-assembly for versatile optical functionality

Liquid crystals subjected to modulated surface alignment assemble into metasurface-type structures capable of various flat-optical functionalities, including light diffraction and focusing, deflection and splitting. Remaining in a fluid phase, they are susceptible to external stimuli, and, in particular, can be efficiently controled by low voltages. We overview the existing approaches to the design and fabrication of liquid-crystal metasurfaces, highlight their realized optical functions and discuss the applied potential in emerging photonic devices.

Radiographic Outcomes following K-Wire Augmentation of Dorsal Spanning Plate Fixation for Intra-Articular Fractures of the Distal Radius

Background Restoration of articular surface alignment is critical in treating intra-articular distal radius fractures. Dorsal spanning plate fixation functions as an internal distraction mechanism and can be advantageous in the setting of highly comminuted fracture patterns, polytrauma patients, and patients with radiocarpal instability. The addition of K-wires to support articular surface reduction potentially augments fracture repair stability. Questions/Purposes We examined the radiographic outcomes and maintenance of reduction in patients with comminuted intra-articular distal radius fractures treated with K-wire fixation of articular fragments followed by dorsal spanning plate application. Patients and Methods We reviewed 35 consecutive patients with complex intra-articular distal radius fractures treated with dorsal spanning plate and K-wire fixation between April 2016 and October 2019. AO classification was recorded: B1 (3), B3 (2), C2 (2), C3 (28). A two-tailed paired t-test was used to compare findings immediately post-dorsal spanning plate surgery and at final follow-up after dorsal spanning plate removal. Results Mean patient age was 43.3 years (19–78 years). Mean follow-up was 7.8 months (SD 4.3 months) from surgery and 2.5 months from pin removal (SD 2.6 months). All patients achieved radiographic union. Radial height (mean interval change (MIC) 0.2 mm, SD 2.2, p = 0.63), articular step-off (MIC 0.1 mm, SD 0.6 mm, p = 0.88), and radial inclination (MIC −1.1 degrees, SD 3.7 degrees, p = 0.10) did not change from post-surgery to final follow-up. Ulnar variance (MIC −0.9 mm, SD 2.0 mm, p = 0.02) and volar tilt (MIC −1.5 degrees, SD 4.4 degrees, p = 0.05) were found to have decreased. Conclusion Dorsal spanning plate augmented with K-wire fixation for comminuted intra-articular distal radius fractures in polytrauma patients allows for immediate weightbearing and maintains articular surface alignment at radiographic union and may provide better articular restoration than treatment with dorsal spanning plate alone. Level of Evidence This is a Level IV, therapeutic study.

Off-The-Shelf Stylus: Using XR Devices for Handwriting and Sketching on Physically Aligned Virtual Surfaces

This article introduces the Off-The-Shelf Stylus (OTSS), a framework for 2D interaction (in 3D) as well as for handwriting and sketching with digital pen, ink, and paper on physically aligned virtual surfaces in Virtual, Augmented, and Mixed Reality (VR, AR, MR: XR for short). OTSS supports self-made XR styluses based on consumer-grade six-degrees-of-freedom XR controllers and commercially available styluses. The framework provides separate modules for three basic but vital features: 1) The stylus module provides stylus construction and calibration features. 2) The surface module provides surface calibration and visual feedback features for virtual-physical 2D surface alignment using our so-called 3ViSuAl procedure, and surface interaction features. 3) The evaluation suite provides a comprehensive test bed combining technical measurements for precision, accuracy, and latency with extensive usability evaluations including handwriting and sketching tasks based on established visuomotor, graphomotor, and handwriting research. The framework’s development is accompanied by an extensive open source reference implementation targeting the Unity game engine using an Oculus Rift S headset and Oculus Touch controllers. The development compares three low-cost and low-tech options to equip controllers with a tip and includes a web browser-based surface providing support for interacting, handwriting, and sketching. The evaluation of the reference implementation based on the OTSS framework identified an average stylus precision of 0.98 mm (SD = 0.54 mm) and an average surface accuracy of 0.60 mm (SD = 0.32 mm) in a seated VR environment. The time for displaying the stylus movement as digital ink on the web browser surface in VR was 79.40 ms on average (SD = 23.26 ms), including the physical controller’s motion-to-photon latency visualized by its virtual representation (M = 42.57 ms, SD = 15.70 ms). The usability evaluation (N = 10) revealed a low task load, high usability, and high user experience. Participants successfully reproduced given shapes and created legible handwriting, indicating that the OTSS and it’s reference implementation is ready for everyday use. We provide source code access to our implementation, including stylus and surface calibration and surface interaction features, making it easy to reuse, extend, adapt and/or replicate previous results (https://go.uniwue.de/hci-otss).

Micro-ECM of the Aerodynamic Surface Understating

This paper demonstrates that 18 μm deep surface understating with a tolerance of 4.5 μm and a roughness Ra=0.4 μm can be produced to the required accuracy by electrochemical die-sinking if configured appropriately.Theoretical analysis shows that the bottom profile error can be presented as a superposition of the errors of surface alignment (non-parallel bottom) and shape (non-flat bottom). In this case, the alignment error accounts for a greater part of the size tolerance (3 μm out of 4.5 μm). This is why the attainment of desired accuracy revolves around the development, analysis, and assessment of ways to reduce this error.

Roughness Measurements with Polychromatic Speckles on Tilted Surfaces

Surface light scattering enables contactless and fast measurements of surface roughness. A surface inclination alters the direction of the scattering beam and thus the measured surface roughness is calculated from the detected intensity distribution. Hence, an accurate sensor–surface alignment is necessary. In order to achieve tilt-independent roughness measurements, a model-based evaluation approach for polychromatic speckle patterns is presented. By evaluating the shape of the superposed speckles, which occur for polychromatic illumination, with regard to the distance to the scattering centre, surfaces with an Sa roughness value in the range of 0.8–3.2 μm are measurable. Experimental investigations demonstrate that the influence of a surface tilt up to ± 1.25° on the roughness measurement is reduced by 90%. As a result, the robustness of the polychromatic speckle roughness measurement is improved, which allows to speed up the adjustment of the measurement system or the surface sample, respectively.

Surface alignment of ferroelectric nematic liquid crystals

The success of nematic liquid crystals in displays and optical applications is due to the combination of their optical uniaxiality, fluidity, elasticity, responsiveness to electric fields and controllable coupling of...

All-Optically Controllable Photonic Crystals Based on Chiral-Azobenzene-Doped Blue Phase Liquid Crystals

In this study, the all-optical control properties of photonic crystals based on self-assembled chiral-azobenzene-doped blue phase liquid crystals (CA-BPLCs) were investigated. The difference in the photothermal characteristics of CA-BPLCs with and without homogeneous surface alignment was discussed. Results revealed that surface alignment could induce more uniform and diverse blue phase (BP) structures, including BPII, BPI, and BPS-like phases during cooling. Consequently, the temperature range of BP was wider than that of the sample without surface alignment. All-optical control experiments with light illumination were then performed on the aligned or nonaligned CA-BPLC samples. During continuous irradiation with light beams at wavelengths of 405 and 450 nm, CA dopants underwent trans→cis and cis→trans back photoisomerizations, respectively. These processes promoted isothermal phase transition and wavelength shifting, which further enabled the all-optical control of the CA-BPLC samples. Various optical control modes of BPLC could be achieved through phase change and wavelength shifting by appropriately selecting the working temperature and surface treatment of BPLC. This study could be further used as a basis for developing photoswitchable and tunable BPLC photonic devices, such as light-controllable gratings, filters, mirrors, and lasers.