Evaluation of Synthetic Aggregate from Lignite Fly Ash

1974 ◽  
Vol 100 (1) ◽  
pp. 27-40
Author(s):  
Roger L. Engelke ◽  
William B. Ledbetter ◽  
Bob M. Gallaway
Keyword(s):  
Fly Ash ◽  

2009 ◽  
Vol 6 (2) ◽  
pp. 511-517 ◽  
Author(s):  
S. Sarojini ◽  
S. Ananthakrishnasamy ◽  
G. Manimegala ◽  
M. Prakash ◽  
G. Gunasekaran

Fly ash is an amorphous ferroalumino silicate, an important solid waste around thermal power plants. It creates problems leading to environmental degradation due to improper utilization or disposal. However, fly ash is a useful ameliorant that may improve the physical, chemical and biological properties of soils and is a source of readily available plant macro and micronutrients when it is used with biosolids. Supply of nutrients from fly ash with biosolids may enhance their agricultural use. The growth and reproduction ofEisenia fetidawas studied during vermicomposting of fly ash with cowdung and pressmud in four different proportions (T1,T2,T3& T4) and one controli.e.,cow dung and pressmud alone. The growth, cocoon and hatchlings production were observed at the interval of 15 days over a period of 60 days. The maximum worm growth and reproduction was observed in bedding material alone. Next to that the T1was observed as the best mixture for vermiculture.



1987 ◽  
Vol 31 ◽  
pp. 343-349 ◽  
Author(s):  
David L. Wertz ◽  
Leo W. Collins ◽  
Franz Froelicher

AbstractThe use of coal, as either a primary energy source or as a source of feedstock chemicals, has been complicated by the noxious and toxic chemical species formed in its gaseous effluents and also by the huge quantities of ash vhich result from its processing. Both the noxious gases and the ash have been the subjects of Federal legislations.X-ray powder patterns (XRPP), composed of atom-pair and self x~ray scattering and the diffraction produced by crystalline phases, have long been used to investigate coals and particularly their combustion ashes (1-3). Over twenty different crystalline phases have recently been reported to exist in certain lignite fly ash (3). Analysis of the crystalline phases has typically been emphasized in previous papers involving coals and ashes, but the amorphous scattering has been given little treatment.



CATENA ◽  
2018 ◽  
Vol 163 ◽  
pp. 78-88 ◽  
Author(s):  
Olga Kostić ◽  
Snežana Jarić ◽  
Gordana Gajić ◽  
Dragana Pavlović ◽  
Marija Pavlović ◽  
...  


2020 ◽  
Vol 231 (7) ◽  
Author(s):  
C. Tsioptsias ◽  
G. Samiotis ◽  
L. Lefteri ◽  
E. Amanatidou


2003 ◽  
Vol 21 (5) ◽  
pp. 448-458 ◽  
Author(s):  
Fatma Olcay Kocaer ◽  
Ufuk Alkan ◽  
Hüseyin Savas Baskaya


2015 ◽  
Vol 660 ◽  
pp. 268-272 ◽  
Author(s):  
V. Karayannis ◽  
G. Papapolymerou ◽  
S. Zaoutsos ◽  
S. Lamprakopoulos ◽  
K. Ntampegliotis ◽  
...  

In the present research, the combined utilization of fly ash (FA), derived from a lignite-fed power station, along with scrap-soil (SS), a steel industry by-product, is investigated, for the development of eco-friendly ceramics, thus enhancing innovation and sustainability. The valorization of these low price and largely available industrial secondary resources as 100% the raw materials mixture in ceramic industry arises interesting technological, environmental and economical benefits. FA and SS were mixed in various proportions (0-70%wt. in SS), cold compacted at 20 tn load using an automated hydraulic press to form a series of 5 cm diameter disc-shaped specimens, and finally sintered at three different peak temperatures (1000oC, 1100oC and 1140oC) for 3h. Then, the specimen microstructure and physico-mechanical properties were characterized. According to the experimental results, a sintering temperature increase from 1000°C up to 1140oC significantly improves specimen densification, thus sharply enhancing the diametral tensile strength (DTS), from 0.5 MPa up to 12.8 MPa respectively for a 50-50%wt. FA-SS mixture. Mechanical strength also varies with the SS percentage in the raw materials. Physico-mechanical properties seem to be constant for specimens containing SS up to 60% at 1140oC.



1983 ◽  
Vol 32 (3) ◽  
pp. 329-343 ◽  
Author(s):  
Nicholas Hahon ◽  
James A. Booth ◽  
Martin-Jose Sepulveda


2014 ◽  
Vol 11 (SE) ◽  
pp. 109-113
Author(s):  
V.A. Elavalagan
Keyword(s):  
Fly Ash ◽  


2006 ◽  
Vol 79 (2) ◽  
pp. 173-187 ◽  
Author(s):  
L.C. Ram ◽  
N.K. Srivastava ◽  
R.C. Tripathi ◽  
S.K. Jha ◽  
A.K. Sinha ◽  
...  


Sign in / Sign up

Export Citation Format

Share Document