scholarly journals Optimal control of underactuated mechanical systems: A geometric approach

2010 ◽  
Vol 51 (8) ◽  
pp. 083519 ◽  
Author(s):  
Leonardo Colombo ◽  
David Martín De Diego ◽  
Marcela Zuccalli
2010 ◽  
Author(s):  
L. Colombo ◽  
D. Martín de Diego ◽  
Manuel Asorey ◽  
Jesús Clemente-Gallardo ◽  
Eduardo Martínez ◽  
...  

2014 ◽  
Vol 2014 ◽  
pp. 1-16
Author(s):  
S. Woods ◽  
W. Szyszkowski

A method of solving optimal manoeuvre control of linear underactuated mechanical systems is presented. The nonintegrable constraints present in such systems are handled by adding dummy actuators and then by applying Lagrange multipliers to reduce their action to zero. The open- and closed-loop control schemes can be analyzed. The method, referred to as the constrained modal space optimal control (CMSOC), is illustrated in the examples of gantry crane operations.


Author(s):  
Igor Afonso Acampora Prado ◽  
Davi Ferreira de Castro ◽  
Mauricio Andrés Varela Morales ◽  
Domingos Rade

Author(s):  
Afef Hfaiedh ◽  
Ahmed Chemori ◽  
Afef Abdelkrim

In this paper, the control problem of a class I of underactuated mechanical systems (UMSs) is addressed. The considered class includes nonlinear UMSs with two degrees of freedom and one control input. Firstly, we propose the design of a robust integral of the sign of the error (RISE) control law, adequate for this special class. Based on a change of coordinates, the dynamics is transformed into a strict-feedback (SF) form. A Lyapunov-based technique is then employed to prove the asymptotic stability of the resulting closed-loop system. Numerical simulation results show the robustness and performance of the original RISE toward parametric uncertainties and disturbance rejection. A comparative study with a conventional sliding mode control reveals a significant robustness improvement with the proposed original RISE controller. However, in real-time experiments, the amplification of the measurement noise is a major problem. It has an impact on the behaviour of the motor and reduces the performance of the system. To deal with this issue, we propose to estimate the velocity using the robust Levant differentiator instead of the numerical derivative. Real-time experiments were performed on the testbed of the inertia wheel inverted pendulum to demonstrate the relevance of the proposed observer-based RISE control scheme. The obtained real-time experimental results and the obtained evaluation indices show clearly a better performance of the proposed observer-based RISE approach compared to the sliding mode and the original RISE controllers.


Sign in / Sign up

Export Citation Format

Share Document