Femtosecond studies of coherent acoustic phonons in gold nanoparticles embedded in TiO2 thin films

2000 ◽  
Vol 87 (1) ◽  
pp. 612-614 ◽  
Author(s):  
W. Qian ◽  
L. Lin ◽  
Y. J. Deng ◽  
Z. J. Xia ◽  
Y. H. Zou ◽  
...  
Coatings ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1525
Author(s):  
Sofia Rubtsov ◽  
Albina Musin ◽  
Michael Zinigrad ◽  
Alexander Kalashnikov ◽  
Viktor Danchuk

This paper proposes a new strategy for producing thin films of TiO2 with embedded gold nanoparticles (TiO2/AuNP). One of the main tasks was the synthesis of a stable dispersion of TiO2 and gold nanoparticles in an aqueous solution of ethylene glycol, suitable for inkjet printing—ink with complex gold nanoparticles (AuCNP ink). The AuCNP were synthesized by a reduction from tetrachloroauric acid in the presence of TiO2 nanoparticles and ethylene glycol (EG). The final formation of TiO2/AuNP films occurred during the annealing of AuCNP layers, inkjet printed on a glass substrate. The TiO2/AuNP films demonstrate absorbance in the yellow-green range due to the localized surface plasmon resonance (LSPR) and are promising for solar cell application.


2001 ◽  
Vol 79 (20) ◽  
pp. 3361-3363 ◽  
Author(s):  
Yue-Kai Huang ◽  
Gia-Wei Chern ◽  
Chi-Kuang Sun ◽  
Yulia Smorchkova ◽  
Stacia Keller ◽  
...  

2008 ◽  
Vol 2 (11) ◽  
pp. 1420-1426 ◽  
Author(s):  
Nobutomo NAKAMURA ◽  
Atsuyoshi URANISHI ◽  
Tomohiro SHAGAWA ◽  
Hirotsugu OGI ◽  
Masahiko HIRAO ◽  
...  

2014 ◽  
Vol 89 (17) ◽  
Author(s):  
Chuan He ◽  
Marcus Daniel ◽  
Martin Grossmann ◽  
Oliver Ristow ◽  
Delia Brick ◽  
...  

2018 ◽  
Vol 18 (3) ◽  
pp. 81-91 ◽  
Author(s):  
C. Lalhriatpuia

Nanopillars-TiO2 thin films was obtained on a borosilicate glass substrate with (S1) and without (S2) polyethylene glycol as template. The photocatalytic behaviour of S1 and S2 thin films was assessed inthe degradation of methylene blue (MB) dye from aqueous solution under batch reactor operations. The thin films were characterized by the SEM, XRD, FTIR and AFM analytical methods. BET specific surface area and pore sizes were also obtained. The XRD data confirmed that the TiO2 particles are in its anatase mineral phase. The SEM and AFM images indicated the catalyst is composed with nanosized pillars of TiO2, evenly distributed on the surface of the substrate. The BET specific surface area and pore sizes of S1 and S2 catalyst were found to be 5.217 and 1.420 m2/g and 7.77 and 4.16 nm respectively. The photocatalytic degradation of MB was well studied at wide range of physico-chemical parameters. The effect of solution pH (pH 4.0 to 10.0) and MB initial concentration (1.0 to 10.0 mg/L) was extensively studied and the effect of several interfering ions, i.e., cadmium nitrate, copper sulfate, zinc chloride, sodium chloride, sodium nitrate, sodium nitrite, glycine, oxalic acid and EDTA in the photocatalytic degradation of MB was demonstrated. The maximum percent removal of MB was observed at pH 8.0 beyond which it started decreasing and a low initial concentration of the pollutant highly favoured the photocatalytic degradation using thin films and the presence of several interfering ions diminished the photocatalytic activity of thin films to some extent. The overall photocatalytic activity was in the order: S2 > S1 > UV. The photocatalytic degradation of MB was followed the pseudo-first-order rate kinetics. The mineralization of MB was studied with total organic carbon measurement using the TOC (total organic carbon) analysis.


2019 ◽  
Vol 7 (1) ◽  
pp. 28
Author(s):  
KOMARAIAH DURGAM ◽  
RADHA EPPA ◽  
REDDY M. V. RAMANA ◽  
KUMAR J. SIVA ◽  
R. SAYANNA ◽  
...  

2011 ◽  
Vol 10 (2) ◽  
pp. 187-192 ◽  
Author(s):  
Ramona-Crina Suciu ◽  
Marcela Corina Rosu ◽  
Teofil Danut Silipas ◽  
Emil Indrea ◽  
Violeta Popescu ◽  
...  

2018 ◽  
Vol 6 (1) ◽  
pp. 22-30
Author(s):  
C. Lalhriatpuia ◽  
◽  
Thanhming liana ◽  
K. Vanlaldinpuia

The photocatalytic activity of Nanopillars-TiO2 thin films was assessed in the degradation of Bromophenol blue (BPB) dye from aqueous solution under batch reactor operations. The thin films were characterized by the XRD, SEM and AFM analytical methods. BET specific surface area and pore sizes were also obtained. The XRD data showed anatase phase of TiO2 particles with average particle size of 25.4 and 21.9 nm, for S1 and S2 catalysts respectively. The SEM and AFM images indicated the catalyst composed with Nanosized pillars of TiO2, evenly distributed on the surface of the substrate. The average height of the pillars was found to be 180 and 40 nm respectively for the S1 and S2 catalyst. The BET specific surface area and pore sizes of S1 and S2 catalyst were found to be 5.217 and 1.420 m2/g and 7.77 and 4.16 nm respectively. The photocatalytic degradation of BPB using the UV light was studied at wide range of physico-chemical parametric studies to determine the mechanism of degradation as well as the practical applicability of the technique. The batch reactor operations were conducted at varied pH (pH 4.0 to 10.0), BPB initial concentration (1.0 to 20.0 mg/L) and presence of several interfering ions, i.e., cadmium nitrate, copper sulfate, zinc chloride, sodium chloride, sodium nitrate, sodium nitrite, glycine, oxalic acid and EDTA in the photocatalytic degradation of BPB. The maximum percent removal of BPB was observed at pH 6.0 and a low initial concentration of the pollutant highly favours the photocatalytic degradation using thin films. The presence of several interfering ions suppressed the photocatalytic activity of thin films to some extent. The time dependence photocatalytic degradation of BPB was demonstrated with the pseudo-first-order rate kinetics. Study was further extended with total organic carbon measurement using the TOC (Total Organic Carbon) analysis. This demonstrated an apparent mineralization of BPB from aqueous solutions.


Sign in / Sign up

Export Citation Format

Share Document