Broadband sound transmission loss of a large-scale membrane-type acoustic metamaterial for low-frequency noise control

2017 ◽  
Vol 111 (4) ◽  
pp. 041903 ◽  
Author(s):  
Linus Yinn Leng Ang ◽  
Yong Khiang Koh ◽  
Heow Pueh Lee
Keyword(s):  
Large Scale ◽  
Noise Control ◽  
Transmission Loss ◽  
Low Frequency ◽  
Frequency Noise ◽  
Sound Transmission Loss ◽  
Low Frequency Noise ◽  
Acoustic Metamaterial ◽  
Membrane Type ◽  
Broadband Sound

Multi-tonal low frequency noise control using Helmholtz resonators with complex cavity designs for aircraft cabin noise improvement

2021 ◽  
Vol 263 (2) ◽  
pp. 3975-3986
Author(s):  
Tenon Charly Kone ◽  
Sebastian Ghinet ◽  
Raymond Panneton ◽  
Thomas Dupont ◽  
Anant Grewal
Keyword(s):  
Noise Control ◽  
Transmission Loss ◽  
Low Frequency ◽  
Helmholtz Resonator ◽  
Sound Insulation ◽  
Frequency Noise ◽  
Low Frequency Noise ◽  
Low Frequencies ◽  
Helmholtz Resonators ◽  
Resonance Frequencies

The noise control at multiple tonal frequencies simultaneously, in the low frequency range, is a challenge for aerospace, ground transportation and building industries. In the past few decades, various low frequency noise control solutions based on acoustic metamaterial designs have been presented in the literature. These solutions showed promising performance and are considered a better alternative to conventional sound insulation materials. In the present investigation, it was noticed that subdividing the cavity of a Helmholtz resonator allowed the control of multi-tonal noise at several resonance frequencies simultaneously and a shift of the resonance peaks towards the low frequencies. This paper proposes concepts of Helmholtz resonators with subdivided cavities to improve the sound transmission loss (STL) performance and simultaneously control the noise at several tonal frequencies. HRs with cylindrical shaped cavities were embedded in a layer of porous material. The STL of the metamaterial noise insulation configuration was predicted using serial and parallel assemblies of transfer matrices (TMM) incorporating a thermo-viscous-acoustic approach to accurately account for the viscous and thermal losses of acoustic wave propagation within the metamaterial. The STL calculated using the proposed TMM approach were observed to be in excellent agreement with the finite element method (FEM) numerical results.

Low-frequency noise control using layered granular aerogel and limp porous media

2021 ◽  
Vol 263 (4) ◽  
pp. 2724-2729
Author(s):  
Yutong Xue ◽  
Amrutha Dasyam ◽  
J. Stuart Bolton ◽  
Bhisham Sharma
Keyword(s):  
Noise Control ◽  
Glass Fibers ◽  
Low Frequency ◽  
Normal Incidence ◽  
Frequency Noise ◽  
Fibrous Materials ◽  
Low Frequency Noise ◽  
Frequency Range ◽  
Fibrous Media ◽  
Impedance Tube Method

The acoustic absorption of granular aerogel layers with a granule sizes in the range of 2 to 40 μm is dominated by narrow-banded, high absorption regions in the low-frequency range and by reduced absorption values at higher frequencies. In this paper, we investigate the possibility of developing new, low-frequency noise reduction materials by layering granular aerogels with traditional porous sound absorbing materials such as glass fibers. The acoustic behavior of the layered configurations is predicted using the arbitrary coefficient method, wherein the granular aerogel layers are modeled as an equivalent poro-elastic material while the fibrous media and membrane are modeled as limp media. The analytical predictions are verified using experimental measurements conducted using the normal incidence, two-microphone impedance tube method. Our results show that layered configurations including granular aerogels, fibrous materials, and limp membranes provide enhanced sound absorption properties that can be tuned for specific noise control applications over a broad frequency range.

scholarly journals Plate-Type Acoustic Metamaterials: Experimental Evaluation of a Modular Large-Scale Design for Low-Frequency Noise Control

Acoustics ◽  
2019 ◽  
Vol 1 (2) ◽  
pp. 354-368 ◽  
Author(s):  
Linus Ang ◽  
Yong Koh ◽  
Heow Lee
Keyword(s):  
Large Scale ◽  
Noise Control ◽  
Traffic Noise ◽  
Low Frequency ◽  
Industrial Applications ◽  
Frequency Noise ◽  
Acoustic Metamaterials ◽  
Scale Design ◽  
Stress Uniformity ◽  
Plate Type

For industrial applications, the scalability of a finalised design is an important factor to consider. The scaling process of typical membrane-type acoustic metamaterials may pose manufacturing challenges such as stress uniformity of the membrane and spatial consistency of the platelet. These challenges could be addressed by plate-type acoustic metamaterials with an internal tonraum resonator. By adopting the concept of modularity in a large-scale design (or meta-panel), the acoustical performance of different specimen configurations could be scaled and modularly combined. This study justifies the viability of two meta-panel configurations for low-frequency (80–500 Hz) noise control. The meta-panels were shown to be superior to two commercially available noise barriers at 80–500 Hz. This superiority was substantiated when the sound transmission class (STC) and the outdoor-indoor transmission class (OITC) were compared. The meta-panels were also shown to provide an average noise reduction of 22.7–27.4 dB at 80–400 Hz when evaluated in different noise environments—traffic noise, aircraft flyby noise, and construction noise. Consequently, the meta-panel may be further developed and optimised to obtain a design that is lightweight and yet has good acoustical performance at below 500 Hz, which is the frequency content of most problematic noises.

scholarly journals Low-Frequency Broadband Sound Transmission Loss of Infinite Orthogonally Rib-Stiffened Sandwich Structure with Periodic Subwavelength Arrays of Shunted Piezoelectric Patches

2017 ◽  
Vol 2017 ◽  
pp. 1-17 ◽  
Author(s):  
Zhifu Zhang ◽  
Weiguang Zheng ◽  
Qibai Huang
Keyword(s):  
Sandwich Structure ◽  
Transmission Loss ◽  
Virtual Work ◽  
Low Frequency ◽  
Sound Transmission ◽  
Sound Insulation ◽  
Convergence Criterion ◽  
Sound Transmission Loss ◽  
Space Harmonic ◽  
Broadband Sound

This paper studies low-frequency sound transmission loss (STL) of an infinite orthogonally rib-stiffened sandwich structure flexibly connected with periodic subwavelength arrays of finite shunted piezoelectric patches. A complete theoretical model is proposed by three steps. First, the panels and piezoelectric patches on both sides are equivalent to two homogeneous facesheets by effective medium method. Second, we take into account all inertia terms of the rib-stiffeners to establish the governing equations by space harmonic method, separating the amplitude coefficients of the equivalent facesheets through virtual work principle. Third, the expression of STL is reduced. Based on the two prerequisites of subwavelength assumption and convergence criterion, the accuracy and validity of the model are verified by finite element simulations, cited experiments, and theoretical values. In the end, parameters affecting the STL performance of the structure are studied. All of these results show that the sandwich structure can improve the low-frequency STL effectively and broaden the sound insulation bandwidth.

Sign in / Sign up

Export Citation Format

Share Document