Large eddy simulation of tip-leakage cavitating flow using a multiscale cavitation model and investigation on model parameters

Purpose The purpose of this paper is to study the mechanism and suppression of instabilities induced by cavitating flow around a three-dimensional hydrofoil with a particular focus on cavitation control with a slot. Design/methodology/approach The transient cavitating flow around a Clark-Y hydrofoil was investigated using a transport-equation-based cavitation model and the stress-blended eddy simulation model was used to capture the flow turbulence. A homogeneous Rayleigh–Plesset cavitation model was used to model the transient cavitation process and the results were validated with test data. A slot was applied to the hydrofoil to suppress cavitation instabilities, and various slot widths and exit locations were applied to the blade and the cavitation behavior, as well as drag/lift forces, were simulated and compared to investigate the effects of slot geometries on cavitation suppression. Findings The large eddy simulation based turbulence model was able to capture the interactions between the cavitation and turbulence. Moreover, the simulation revealed that the re-entrant jet was responsible for the periodic shedding of cavities. The results indicated that a slot was able to mitigate or even suppress cavitation-induced instabilities. A jet flow was generated at the slot exit and disturbed the re-entrant jet. If the slot geometry was properly designed, the jet could block the re-entrant jet and suppress the unsteady cavitation behavior. Originality/value This study provides unique insights into the complicated transient cavitation flows around a three-dimensional hydrofoil and introduces an effective passive cavitation control technique useful to researchers and engineers in the areas of fluid dynamics and turbomachinery.

Download Full-text

Investigation of Turbulence Characteristics in a Tip Leakage Flow Model Using Large-Eddy Simulation

Volume 2A: Turbomachinery ◽

10.1115/gt2019-90844 ◽

2019 ◽

Author(s):

Yanfei Gao ◽

Yangwei Liu ◽

Lipeng Lu

Keyword(s):

Large Eddy Simulation ◽

Flow Model ◽

Side Wall ◽

Leakage Flow ◽

Mean Flow ◽

Tip Leakage Flow ◽

Turbulence Characteristics ◽

Tip Leakage ◽

Eddy Simulation ◽

Large Eddy

Abstract A simple tip leakage flow (TLF) model which consists of a square duct with a longitudinal slit on the top of a side wall is proposed to reproduce the jet flow/main flow shear mechanism of the tip leakage vortex (TLV) rolling-up in turbomachinery. Large-eddy simulation (LES) is employed to investigate the turbulence characteristics of the flow model under low Reynolds number condition. The geometry and boundary conditions of the flow model are simplified from a compressor rotor and modified to apply to low-Re condition for LES. The vortex structures and turbulence characteristics of the LES results are compared with the measurements of the rotor. It is found that the flow model could reproduce similar flow field and turbulence structures compared with the TLF in the real rotor, thus it can be used to investigate the turbulence in practical flows. Reynolds-Averaged Navier-Stokes (RANS) calculations are also carried out. The mean flow and turbulence behaviors of different cases are analyzed. The budgets of turbulent kinetic energy (k) are analyzed to investigate the turbulence transport nature in the TLF model, indicating that the non-equilibrium transport process of k is significant, especially the pressure and turbulent transport, which is not predicted by RANS.

Download Full-text

LES investigation on vortex dynamics of transient sheet/cloud cavitating flow using different vortex identification methods

Modern Physics Letters B ◽

10.1142/s0217984921500111 ◽

2020 ◽

pp. 2150111

Author(s):

Shuheng Qu ◽

Jinping Li ◽

Huaiyu Cheng ◽

Bin Ji

Keyword(s):

Vortex Dynamics ◽

Cavitating Flow ◽

Vortex Identification ◽

Cavitation Model ◽

Identification Methods ◽

Vortex Interactions ◽

Eddy Simulation ◽

Large Eddy ◽

Lift And Drag ◽

Criterion Method

The sheet/cloud cavitating flow always contains complex multiscale vortex structures generated by the cavity cloud shedding and collapsing. In this study, the transient sheet/cloud cavitating flow around a Clark-Y hydrofoil is numerically investigated using the Large Eddy Simulation (LES) method coupled with the Zwart–Gerber–Belamri (ZGB) cavitation model. The simulation accurately reproduces the unsteady cavitation evolution process, and the predicted time-averaged lift and drag coefficients, total vapor volume variation and velocity distribution agree fairly well with the experimental measurements. The cavitation vortex dynamics are studied in detail with different vortex identification methods including the vorticity method, the [Formula: see text]-criterion method, the [Formula: see text] method, the [Formula: see text] method and the Liutex method. The vortex identification ability of the different methods in the transient sheet/cloud cavitating flow is also discussed. Generally, the Liutex method combines the advantages of the other methods and can accurately identify both the vortex position and strength. Further analysis of cavitation-vortex interactions demonstrates that the cavity cloud shedding and collapsing have a pronounced influence on the vortex structure.

Download Full-text

Prediction of Unsteady Tip Leakage Flow of a Transonic Compressor Rotor by Reynolds-Stress-Constrained Large Eddy Simulation

Volume 2A: Turbomachinery ◽

10.1115/gt2018-76373 ◽

2018 ◽

Author(s):

Yueqing Zhuang ◽

Hui Liu

Keyword(s):

Large Eddy Simulation ◽

Reynolds Stress ◽

Rotor Blade ◽

Leading Edge ◽

Leakage Flow ◽

Tip Leakage Flow ◽

Tip Leakage ◽

Transonic Compressor ◽

Eddy Simulation ◽

Large Eddy

Since the unsteadiness of tip leakage flow has profound effects on both aerodynamic performance and stall margin of axial compressors, it is important to accurately predict the transient tip flow at affordable computational cost. Limited by the high requirement of grid resolution of wall turbulence flow, large eddy simulation (LES) method is greatly restricted in engineering application. In the present work, a Reynolds-stress-constrained large eddy simulation (CLES) method has been introduced, in which the whole domain is simulated using LES while Reynolds stress constraint is enforced on the subgrid-scale (SGS) stress model for near-wall regions aiming at reducing the near-wall grid resolution. The CLES simulations have been performed to investigate the flow behaviors of the unsteady tip leakage flow in a transonic compressor NASA Rotor 67 at near-stall conditions. Reliability assessments have been conducted through comparisons of experimental measurements and numerical results obtained by RANS, DES, CLES as well as LES, respectively. Both the total pressure ratio and isentropic efficiency calculated by CLES agree well with experiment. The turbulence statistical results show three distinct high flow fluctuation regions near the blade tip. The first one is a long and narrow strip ahead of the leading edge of the rotor caused by the movement of the passage shock wave. The second one is formed on the suction side from the leading-edge of the rotor blade due to the oscillation of the tip leakage vortex. And the third one, which occupies most of the blade passage from the middle part of the rotor blade, is generated under multiple factors. The frequency characteristic of the unsteady tip leakage flow has been analyzed. The energy spectrums of the local transient pressure signals are highly related with the local unsteady flow features. The originating mechanisms of the flow unsteadiness in the rotor tip leakage flow have also been discussed, and the results show that the flow unsteadiness is mainly caused by a combined interaction effect of the double leakage flow, the tip leakage vortex flow spilled from the adjacent blade passage, as well as the involved main flow.

Download Full-text