Numerical investigation of passive cavitation control using a slot on a three-dimensional hydrofoil

2019 ◽  
Vol 30 (7) ◽  
pp. 3585-3605 ◽  
Author(s):  
Cheng Liu ◽  
Qingdong Yan ◽  
Houston G. Wood
Keyword(s):  
Three Dimensional ◽  
Cavitating Flow ◽  
Control Technique ◽  
Cavitation Model ◽  
Content Type ◽  
Eddy Simulation ◽  
Simulation Based ◽  
Large Eddy ◽  
Flow Turbulence ◽  
Cavitation Behavior

Purpose The purpose of this paper is to study the mechanism and suppression of instabilities induced by cavitating flow around a three-dimensional hydrofoil with a particular focus on cavitation control with a slot. Design/methodology/approach The transient cavitating flow around a Clark-Y hydrofoil was investigated using a transport-equation-based cavitation model and the stress-blended eddy simulation model was used to capture the flow turbulence. A homogeneous Rayleigh–Plesset cavitation model was used to model the transient cavitation process and the results were validated with test data. A slot was applied to the hydrofoil to suppress cavitation instabilities, and various slot widths and exit locations were applied to the blade and the cavitation behavior, as well as drag/lift forces, were simulated and compared to investigate the effects of slot geometries on cavitation suppression. Findings The large eddy simulation based turbulence model was able to capture the interactions between the cavitation and turbulence. Moreover, the simulation revealed that the re-entrant jet was responsible for the periodic shedding of cavities. The results indicated that a slot was able to mitigate or even suppress cavitation-induced instabilities. A jet flow was generated at the slot exit and disturbed the re-entrant jet. If the slot geometry was properly designed, the jet could block the re-entrant jet and suppress the unsteady cavitation behavior. Originality/value This study provides unique insights into the complicated transient cavitation flows around a three-dimensional hydrofoil and introduces an effective passive cavitation control technique useful to researchers and engineers in the areas of fluid dynamics and turbomachinery.

LES investigation on vortex dynamics of transient sheet/cloud cavitating flow using different vortex identification methods

2020 ◽  
pp. 2150111
Author(s):  
Shuheng Qu ◽  
Jinping Li ◽  
Huaiyu Cheng ◽  
Bin Ji
Keyword(s):  
Vortex Dynamics ◽  
Cavitating Flow ◽  
Vortex Identification ◽  
Cavitation Model ◽  
Identification Methods ◽  
Vortex Interactions ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Lift And Drag ◽  
Criterion Method

The sheet/cloud cavitating flow always contains complex multiscale vortex structures generated by the cavity cloud shedding and collapsing. In this study, the transient sheet/cloud cavitating flow around a Clark-Y hydrofoil is numerically investigated using the Large Eddy Simulation (LES) method coupled with the Zwart–Gerber–Belamri (ZGB) cavitation model. The simulation accurately reproduces the unsteady cavitation evolution process, and the predicted time-averaged lift and drag coefficients, total vapor volume variation and velocity distribution agree fairly well with the experimental measurements. The cavitation vortex dynamics are studied in detail with different vortex identification methods including the vorticity method, the [Formula: see text]-criterion method, the [Formula: see text] method, the [Formula: see text] method and the Liutex method. The vortex identification ability of the different methods in the transient sheet/cloud cavitating flow is also discussed. Generally, the Liutex method combines the advantages of the other methods and can accurately identify both the vortex position and strength. Further analysis of cavitation-vortex interactions demonstrates that the cavity cloud shedding and collapsing have a pronounced influence on the vortex structure.

Large eddy simulation of tip-leakage cavitating flow using a multiscale cavitation model and investigation on model parameters

2021 ◽  
Vol 33 (9) ◽  
pp. 092104
Author(s):  
Linmin Li ◽  
Yakang Huo ◽  
Zhengdong Wang ◽  
Xiaojun Li ◽  
Zuchao Zhu
Keyword(s):  
Large Eddy Simulation ◽  
Cavitating Flow ◽  
Model Parameters ◽  
Cavitation Model ◽  
Tip Leakage ◽  
Eddy Simulation ◽  
Large Eddy

Numerical Simulation of Cavity Shedding from a Three-Dimensional Twisted Hydrofoil and Induced Pressure Fluctuation by Large-Eddy Simulation

2012 ◽  
Vol 134 (4) ◽  
Author(s):  
Xianwu Luo ◽  
Bin Ji ◽  
Xiaoxing Peng ◽  
Hongyuan Xu ◽  
Michihiro Nishi
Keyword(s):  
Large Eddy Simulation ◽  
Pressure Fluctuation ◽  
Three Dimensional ◽  
Cavitating Flow ◽  
Numerical Results ◽  
Central Plane ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Cavity Shedding ◽  
Twisted Hydrofoil

Simulation of cavity shedding around a three-dimensional twisted hydrofoil has been conducted by large eddy simulation coupling with a mass transfer cavitation model based on the Rayleigh-Plesset equation. From comparison of the numerical results with experimental observations, e.g., cavity shedding evolution, it is validated that the unsteady cavitating flow around a twisted hydrofoil is reasonably simulated by the proposed method. Numerical results clearly reproduce the cavity shedding process, such as cavity development, breaking-off and collapsing in the downstream. Regarding vapor shedding in the cavitating flow around three-dimensional foils, it is primarily attributed to the effect of the re-entrant flow consisting of a re-entrant jet and a pair of side-entrant jets. Formation of the re-entrant jet in the rear part of an attached cavity is affected by collapse of the last shedding vapor. Numerical results also show that the cavity shedding causes the surface pressure fluctuation of the hydrofoil and the force vibration. Accompanying the cavity evolution, the wave of pressure fluctuation propagates in two directions, namely, from the leading edge of the foil to the trailing edge and from the central plane to the side of the hydrofoil along the span. It is seen that the large pressure fluctuation occurs at the central part of the hydrofoil, where the flow incidence is larger.

Accelerating unstructured large eddy simulation solver with GPU

2018 ◽  
Vol 35 (5) ◽  
pp. 2025-2049 ◽  
Author(s):  
Hongbin Liu ◽  
Xinrong Su ◽  
Xin Yuan
Keyword(s):  
Large Eddy Simulation ◽  
Finite Volume ◽  
Three Dimensional ◽  
Finite Volume Scheme ◽  
High Fidelity ◽  
Double Precision ◽  
Content Type ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Speed Up

Purpose Adopting large eddy simulation (LES) to simulate the complex flow in turbomachinery is appropriate to overcome the limitation of current Reynolds-Averaged Navier–Stokes modelling and it provides a deeper understanding of the complicated transitional and turbulent flow mechanism; however, the large computational cost limits its application in high Reynolds number flow. This study aims to develop a three-dimensional GPU-enabled parallel-unstructured solver to speed up the high-fidelity LES simulation. Design/methodology/approach Compared to the central processing units (CPUs), graphics processing units (GPUs) can provide higher computational speed. This work aims to develop a three-dimensional GPU-enabled parallel-unstructured solver to speed up the high-fidelity LES simulation. A set of low-dissipation schemes designed for unstructured mesh is implemented with compute unified device architecture programming model. Several key parameters affecting the performance of the GPU code are discussed and further speed-up can be obtained by analysing the underlying finite volume-based numerical scheme. Findings The results show that an acceleration ratio of approximately 84 (on a single GPU) for double precision algorithm can be achieved with this unstructured GPU code. The transitional flow inside a compressor is simulated and the computational efficiency has been improved greatly. The transition process is discussed and the role of K-H instability playing in the transition mechanism is verified. Practical/implications The speed-up gained from GPU-enabled solver reaches 84 compared to original code running on CPU and the vast speed-up enables the fast-turnaround high-fidelity LES simulation. Originality/value The GPU-enabled flow solver is implemented and optimized according to the feature of finite volume scheme. The solving time is reduced remarkably and the detail structures including vortices are captured.

scholarly journals Cloud Cavitating Flow Over a Submerged Axisymmetric Projectile and Comparison Between Two-Dimensional RANS and Three-Dimensional Large-Eddy Simulation Methods

2016 ◽  
Vol 138 (6) ◽  
Author(s):  
Yiwei Wang ◽  
Chenguang Huang ◽  
Xin Fang ◽  
Xianian Yu ◽  
Xiaocui Wu ◽  
...  
Keyword(s):  
Large Eddy Simulation ◽  
Fluid Dynamic ◽  
Three Dimensional ◽  
Cavitating Flow ◽  
Two Dimensional ◽  
Cloud Cavitation ◽  
Cavity Collapse ◽  
Eddy Simulation ◽  
2D Simulation ◽  
Large Eddy

For the cloud cavitation around slender axisymmetric projectiles, a two-dimensional (2D) numerical method was based on the mixture approach with Singhal cavitation model and modified renormalization-group (RNG) k–ε turbulence model, and a three-dimensional (3D) method was established with large-eddy simulation (LES) and volume of fraction (VOF) approach. The commercial computational fluid dynamic (CFD) software fluent is used for the 2D simulation, and the open source code OpenFOAM is adopted for the 3D calculation. Experimental and numerical results were presented on a typical case, in which the projectile moves with a quasi-constant axial speed. Simulation results agree well with experimental results. An analysis of the evolution of cavitating flow was performed, and the related physical mechanism was discussed. Results demonstrate that shedding cavity collapse plays an important role in the generation and acceleration of re-entry jet, which is the main reason for the instability of cloud cavitation. The 2D Reynolds-Averaged Navier–Stokes (RANS) method can represent the physical phenomena effectively. The 3D LES method can give an efficient simulation on the shedding vortices, and considerable accurate shapes of shedding cavities are captured.

Sign in / Sign up

Export Citation Format

Share Document