Geological and Bioregional Assessments: a tale of two basins

2021 ◽  
Vol 61 (2) ◽  
pp. 491
Author(s):  
Cameron R. Huddlestone-Holmes ◽  
Kate Holland ◽  
Luk J. M. Peeters
Keyword(s):  
Hydraulic Fracturing ◽  
Mitigation Measures ◽  
Unconventional Gas ◽  
Well Integrity ◽  
Surface Disturbance ◽  
Regulatory Regimes ◽  
Local Geology ◽  
Unconventional Gas Development ◽  
Cooper Basin ◽  
Stimulation Of

The Australian Government’s $35.4 million Geological and Bioregional Assessment (GBA) Program is assessing the potential impacts of shale, tight and deep coal gas development on water and the environment in the Beetaloo, Isa and Cooper GBA regions. This paper compares the outcomes of impact assessments for the Beetaloo and Cooper GBA regions, highlighting the role that local geology, hydrogeology, ecology and regulatory regimes play when assessing potential impacts of unconventional gas development. Unconventional gas development activities between basins are broadly consistent, involving drilling, stimulation of the reservoir (typically through hydraulic fracturing), production and processing of hydrocarbons, export to market and decommissioning and rehabilitation. The characteristics of these activities and their potential impacts are strongly influenced by local factors including the geology, environment, industry practices and regulatory regimes. While subsurface impacts associated with hydraulic fracturing and well integrity are considered unlikely in both regions, regional geology means there is greater stratigraphic separation between target resources and overlying aquifers in the Beetaloo Sub-basin than in the Cooper Basin. Local ecological conditions and species influence the nature of potential impacts on protected matters in the two basins, which are mostly associated with surface disturbance and spills or accidental release of fluids. A key similarity between the two regions is the broadly consistent regulation and management of potential impacts in the two basins. Preliminary results of the causal network analysis indicate that mitigation measures are available for all pathways in which unconventional gas resource development activities may have the potential to impact on endpoints.

First Multistage Hydraulic Fracturing in Russian Offshore: Integrated Approach to Completion and Stimulation of Apt Deposits of V.Filanovsky Field

2021 ◽  
Author(s):  
Mikhail Yurievich Golenkin ◽  
Denis Vladimirovich Eliseev ◽  
Alexander Anatolyevich Zemchikhin ◽  
Alexey Alexandrovich Borisenko ◽  
Akhmat Sakhadinovich Atabiyev ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Caspian Sea ◽  
Complex Type ◽  
The Caspian Sea ◽  
Multistage Hydraulic Fracturing ◽  
Coiled Tubing ◽  
Sand Control ◽  
Friction Reducing ◽  
First Time ◽  
Stimulation Of

Abstract The paper describes the results of the first multistage hydraulic fracturing operations in Russia on the Caspian Sea shelf in the gas condensate and oil deposits of the Aptian formation of V. Filanovsky field. In addition to the small productive formation depth, long horizontal sections with a complex trajectory and high collapse gradients due to large zenith angles when passing the Albian and Aptian deposits of poorly consolidated sandstones are an additional challenge for choosing a multistage hydraulic fracturing assembly. The above features require the use of modern sand control screens with enhanced frac sleeves. A design was developed which includes frac sleeves and sand control screens that can withstand multiple cycles of hydraulic impact during hydraulic fracturing, as well as many opening/closing cycles. A seawater-based frac fluid system was applied. The frac fleet was located on a pontoon, the coiled tubing – on a platform. For the first time in Russia, a 2-5/8 inch coiled tubing with a complex-type friction reducing system was used to switch coupling/sleeves in conditions of very long horizontal sections, complex trajectories, and high friction coefficients. The minimum distances between the screen's sliding sleeves and frac sleeves did not prevent from performing manipulations in complex environment. For well cleaning, the frac assemblies of reverse rotary-pulse and rotary-directional types were used. At the first stage of the project, the development of an optimal method of well completion was successfully implemented. Due to the close interaction of the operating company, service company, and science & engineering team of the operator, for the first time in Russia the design of downhole equipment with the use of advanced technologies of sand control screens, frac sleeves was presented. This solution has proved its effectiveness – the downhole equipment has retained its operational properties after a long period of well operation and further in the process of hydraulic fracturing. At the second stage of the project, 32 MSHF operations were performed at four wells. To reduce nonproductive time and operational risks, a satellite communication complex was additionally deployed on the pontoon to join the engineering centers of Astrakhan, Moscow, and Houston. After finishing the well development, the design indicators for formation fluid rates were achieved, which proved the effectiveness of the stimulation of the field's target objects – this opens great prospects for further development of low-permeability reservoirs at offshore sites in the Caspian Sea. The successful project implementation and the achievement of the design values of oil flow rates has expanded the possibilities of commercial operation of the low-permeable Aptian formation, complicated by the presence of a gas cap and underlying water. A solution was presented for working in extended horizontal well sections with 2-5/8 inch coiled tubing together with a complex-type mechanical friction reducing system. The economic effect was achieved when solving tasks of manipulating mechanical screen couplings and frac port sleeves without the involvement of downhole tractors. The use of new solutions in the completion assembly made it possible to eliminate additional sand ingress problems.

Sign in / Sign up

Export Citation Format

Share Document