Advanced cuff pressure control ventilation (ACPCV); a bench study of a new concept of mechanical ventilation

Author(s):  
Ryota Higeno ◽  
Akinori Uchiyama ◽  
Yusuke Enokidani ◽  
Yuji Fujino
1997 ◽  
Vol 86 (3) ◽  
pp. 676-688 ◽  
Author(s):  
Hideaki Imanaka ◽  
Dean Hess ◽  
Max Kirmse ◽  
Luca M. Bigatello ◽  
Robert M. Kacmarek ◽  
...  

Background Various systems to administer inhaled nitric oxide (NO) have been used in patients and experimental animals. We used a lung model to evaluate five NO delivery systems during mechanical ventilation with various ventilatory patterns. Methods An adult mechanical ventilator was attached to a test lung configured to separate inspired and expired gases. Four injection systems were evaluated with NO injected either into the inspiratory circuit 90 cm proximal to the Y piece or directly at the Y piece and delivered either continuously or only during the inspiratory phase. Alternatively, NO was mixed with air using a blender and delivered to the high-pressure air inlet of the ventilator. Nitric oxide concentration was measured from the inspiratory limb of the ventilator circuit and the tracheal level using rapid- and slow-response chemiluminescence analyzers. The ventilator was set for constant-flow volume control ventilation, pressure control ventilation, pressure support ventilation, or synchronized intermittent mandatory ventilation. Tidal volumes of 0.5 l and 1 l were evaluated with inspiratory times of 1 s and 2 s. Results The system that premixed NO proximal to the ventilator was the only one that maintained constant NO delivery regardless of ventilatory pattern. The other systems delivered variable NO concentration during pressure control ventilation and spontaneous breathing modes. Systems that injected a continuous flow of NO delivered peak NO concentrations greater than the calculated dose. These variations were not apparent when a slow-response chemiluminescence analyzer was used. Conclusions NO delivery systems that inject NO at a constant rate, either continuously or during inspiration only, into the inspiratory limb of the ventilator circuit produce highly variable and unpredictable NO delivery when inspiratory flow is not constant. Such systems may deliver a very high NO concentration to the lungs, which is not accurately reflected by measurements performed with slow-response analyzers.


Author(s):  
Alex Brito ◽  
Evan Fontaine ◽  
S. James El Haddi ◽  
Albert Chi MD FACS

Abstract During the Coronavirus-19, or COVID-19, pandemic there was an early shortage of available ventilators. Domestic production was limited by dependence on overseas sources of raw materials despite partnering with automotive manufacturers. Our group has developed a 3D printed alternative called the CRISIS ventilator. Its design is similar to existing resuscitator devices on the market and uses a modified Pressure-Control ventilation. Here we compare the performance of the device on a simulated ARDS lung and handling of different clinical scenarios included tension pneumothorax and bronchospasm.


2000 ◽  
Vol 91 (5) ◽  
pp. 1145-1150
Author(s):  
Stephen A. Stayer ◽  
Sabrina T. Bent ◽  
Barbara S. Skjonsby ◽  
Anna Frolov ◽  
Dean B. Andropoulos

Sign in / Sign up

Export Citation Format

Share Document