Inorganic and organic phosphate adsorption by iron–manganese (Fe–Mn) plaques extracted from reed roots was investigated. Scanning electron microscopy indicated the roots had rough surfaces and fine particles attached. X-ray photoelectron spectra indicated that Fe and Mn in the Fe–Mn plaques were mainly in the +III and +IV oxidation states, respectively. The contact time, initial phosphate concentration, and temperature effects on inorganic and organic phosphate adsorption were investigated by performing batch tests. Pseudo-second-order model described inorganic and organic phosphate adsorption, indicating the chemisorption was the dominant adsorption process. Langmuir and Freundlich isotherm models were fitted to the equilibrium data, and the Langmuir model fitted best. The maximum inorganic and organic phosphate adsorption capacities at 298 K were 7.69 and 3.66 mg/g, respectively. The inorganic and organic phosphate adsorption processes were spontaneous and exothermic. The inorganic phosphate adsorption capacity was higher than the organic phosphate adsorption capacity, and the presence of organic phosphate did not negatively affect adsorption at inorganic to organic phosphate molar ratios between 1:1 and 3:1. Fourier-transform infrared spectra before and after adsorption showed abundant functional groups on Fe–Mn plaques and that phosphate was probably adsorbed via replacement of hydroxyl groups and inner-sphere surface complexation.
Study of Multi-phase Flow in Porous Media: Comparison of SPH Simulations with Micro-model Experiments
