Preparation of freestanding films from SWCNT/PANI nanocomposites using different blending techniques and characterization of their EMI shielding effectiveness in X-band

2021 ◽  
pp. 1-9
Author(s):  
O. V. P. R. Siva Kumar ◽  
Arunmetha Sundaramoorthy ◽  
V. S. Padmapriya ◽  
Dhineshbabu Nattanmai Raman
Keyword(s):  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
X Band

scholarly journals Ultrathin, Lightweight, and Flexible CNT Buckypaper Enhanced Using MXenes for Electromagnetic Interference Shielding

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Rongliang Yang ◽  
Xuchun Gui ◽  
Li Yao ◽  
Qingmei Hu ◽  
Leilei Yang ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
High Performance ◽  
Electronic Devices ◽  
Deposition Process ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
X Band ◽  
Wearable Electronic Devices ◽  
Emi Se

AbstractLightweight, flexibility, and low thickness are urgent requirements for next-generation high-performance electromagnetic interference (EMI) shielding materials for catering to the demand for smart and wearable electronic devices. Although several efforts have focused on constructing porous and flexible conductive films or aerogels, few studies have achieved a balance in terms of density, thickness, flexibility, and EMI shielding effectiveness (SE). Herein, an ultrathin, lightweight, and flexible carbon nanotube (CNT) buckypaper enhanced using MXenes (Ti3C2Tx) for high-performance EMI shielding is synthesized through a facile electrophoretic deposition process. The obtained Ti3C2Tx@CNT hybrid buckypaper exhibits an outstanding EMI SE of 60.5 dB in the X-band at 100 μm. The hybrid buckypaper with an MXene content of 49.4 wt% exhibits an EMI SE of 50.4 dB in the X-band with a thickness of only 15 μm, which is 105% higher than that of pristine CNT buckypaper. Furthermore, an average specific SE value of 5.7 × 104 dB cm2 g−1 is exhibited in the 5-μm hybrid buckypaper. Thus, this assembly process proves promising for the construction of ultrathin, flexible, and high-performance EMI shielding films for application in electronic devices and wireless communications.

Researching on X-Band Electromagnetic Interference Shielding Efficiency of MWCNTs Buckypapers Inserted with Mn Nanopowder

NANO ◽  
2018 ◽  
Vol 13 (06) ◽  
pp. 1850061 ◽  
Author(s):  
Shaowei Lu ◽  
Yaoyao Bai ◽  
Jijie Wang ◽  
Chenxu Zhao ◽  
Wei Li ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Energy Dispersive Spectrometer ◽  
Composite Films ◽  
Resin Matrix ◽  
Manufacturing Cost ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Filtration Method ◽  
Emi Shielding Effectiveness ◽  
X Band

Ultrathin multi-walled carbon nanotubes (MWCNTs) buckypapers inserted with Mn nanopowder were fabricated via vacuum filtration method, at a lower manufacturing cost and easier operation. The buckypapers were characterized structurally using scanning electron microscopy, energy-dispersive spectrometer and X-ray diffraction. Electromagnetic interference (EMI) shielding effectiveness (SE) of MWCNTs buckypapers inserted with Mn nanopowder (0–30[Formula: see text]wt.%) were tested in X-band (8.2–12.4[Formula: see text]GHz). When the blended Mn nanopowder content is 20[Formula: see text]wt.%, the buckypaper exhibits much higher EMI SE of average value up to 42[Formula: see text]dB with the thickness of only 0.11[Formula: see text]mm. Further, this buckypaper is flexible and lightweight, and can be integrated with resin matrix composites. Thus, the results and techniques promise a simple and effective approach to achieve lightweight and ultrathin composite films for a wide application prospect in the field of EMI shielding and microwave absorption.

Flexible GnPs/EPDM with Excellent Thermal Conductivity and Electromagnetic Interference Shielding Properties

NANO ◽  
2019 ◽  
Vol 14 (06) ◽  
pp. 1950075 ◽  
Author(s):  
Shaowei Lu ◽  
Yaoyao Bai ◽  
Jijie Wang ◽  
Dandan Chen ◽  
Keming Ma ◽  
...  
Keyword(s):  
Thermal Conductivity ◽  
Electromagnetic Interference ◽  
Rubber Matrix ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
X Band ◽  
Cost Efficient ◽  
Emi Se ◽  
Shielding Material

As the portable device hardware has been increasing at a noticeable rate, ultrathin flexible materials with the combination of high thermal conductivity and excellent electromagnetic interference (EMI) shielding performance are urgently needed. Here, we fabricated ethylene propylene diene monomer rubber with different loading graphene nanoplatelets (GnPs/EPDM) by a cost-efficient approach, which combines mixing, ultrasonication and compression. Further investigation demonstrates that the 8[Formula: see text]wt.% GnPs/EPDM with only 0.3[Formula: see text]mm in thickness shows excellent electrical conductivity (28.3[Formula: see text]S/m), thermal conductivity (0.79[Formula: see text]W/m[Formula: see text]K) and good mechanical properties. Besides, the 8[Formula: see text]wt.% GnPs/EPDM exhibits an EMI shielding effectiveness (SE) up to 33[Formula: see text]dB in the X-band (8.2–12.4[Formula: see text]GHz) and 35[Formula: see text]dB in the Ku-band (12.4–18[Formula: see text]GHz), superior to most of the reported rubber matrix. Additionally, the GnPs/EPDM shows excellent flexibility and stability with 95% and 94% retention of EMI SE even after repeated bending for 5000 times and corrosion (under 5% NaCl environment) for a week. Our flexible EMI shielding material will benefit the fast-growing next-generation commercial portable flexible electrons.

A multi-dimensional and level-by-level assembly strategy for constructing flexible and sandwich-type nanoheterostructures for high-performance electromagnetic interference shielding

Nanoscale ◽  
2020 ◽  
Vol 12 (5) ◽  
pp. 3308-3316 ◽  
Author(s):  
Caichao Wan ◽  
Yue Jiao ◽  
Xianjun Li ◽  
Wenyan Tian ◽  
Jian Li ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
High Performance ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Free Standing ◽  
Assembly Strategy ◽  
Emi Shielding Effectiveness ◽  
X Band ◽  
Sandwich Type

A multi-dimensional and level-by-level assembly strategy is developed to construct free-standing and sandwich-type nanoheterostructures achieving an outstanding EMI shielding effectiveness of ∼50.6 dB in the X-band.

Graphene nanosheets/BaTiO3 ceramics as highly efficient electromagnetic interference shielding materials in the X-band

2016 ◽  
Vol 4 (2) ◽  
pp. 371-375 ◽  
Author(s):  
Qing Yuchang ◽  
Wen Qinlong ◽  
Luo Fa ◽  
Zhou Wancheng ◽  
Zhu Dongmei
Keyword(s):  
Electromagnetic Interference ◽  
High Performance ◽  
Graphene Nanosheets ◽  
Pressureless Sintering ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Electromagnetic Interference Shielding ◽  
Highly Efficient ◽  
Emi Shielding Effectiveness ◽  
X Band

Graphene nanosheets filled BaTiO3 ceramics with high-performance EMI shielding effectiveness, greater than 40 dB in the X-band at 1.5 mm thickness, were prepared via pressureless sintering.

scholarly journals Nanostructured La0.7Sr0.3MnO3 compounds for effective electromagnetic interference shielding in the X-band frequency range

2015 ◽  
Vol 3 (4) ◽  
pp. 820-827 ◽  
Author(s):  
Hilal Ahmad Reshi ◽  
Avanish P. Singh ◽  
Shreeja Pillai ◽  
Rama Shankar Yadav ◽  
S. K. Dhawan ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Frequency Range ◽  
Electromagnetic Interference Shielding ◽  
Band Frequency ◽  
Emi Shielding Effectiveness ◽  
X Band

EMI shielding effectiveness values of up to 19 dB are observed in LSMO nanomaterials.

Polyaniline-Stannous Oxide Composites: Novel Material for Broadband EMI Shielding

2012 ◽  
Vol 488-489 ◽  
pp. 557-561 ◽  
Author(s):  
Muhammad Faisal ◽  
Syed Khasim
Keyword(s):  
Electromagnetic Interference ◽  
Chemical Oxidation ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Practical Applications ◽  
Stannous Oxide ◽  
Emi Shielding Effectiveness ◽  
X Band ◽  
Potential Applications ◽  
Emi Se

Insitu polymerization of aniline was carried out in the presence of stannous oxide (SnO) to synthesize Polyaniline (PAni)/SnO composites by chemical oxidation method. The surface morphology of the composites were studied by scanning electron microscopy (SEM).The electromagnetic interference (EMI) shielding properties of the composites were investigated for different wt % of SnO (10,20,30,40 and 50 wt%) in PAni. The EMI measurements were carried out in the frequency range from 8.2 to 12.4 GHz (X-band), which is relevant for practical applications. EMI shielding effectiveness (EMI SE), microwave absorption and reflection, the influence of SnO concentration in PAni on EMI SE of the composites are reported. The composites exhibit EMI SE value of -18 to -23 dB. The absorption dominated EMI SE of these composites indicates the potential applications of these materials for microwave attenuation in the X-band.

Sign in / Sign up

Export Citation Format

Share Document