Laminar burning velocity and ignition delay time for premixed isooctane–air flames with syngas addition

2016 ◽  
Vol 21 (2) ◽  
pp. 228-247 ◽  
Author(s):  
Atmadeep Bhattacharya ◽  
Amitava Datta ◽  
Michael Wensing
Energy ◽  
2017 ◽  
Vol 126 ◽  
pp. 796-809 ◽  
Author(s):  
Jun Li ◽  
Hongyu Huang ◽  
Noriyuki Kobayashi ◽  
Chenguang Wang ◽  
Haoran Yuan

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3562
Author(s):  
Fekadu Mosisa Wako ◽  
Gianmaria Pio ◽  
Ernesto Salzano

The need for lowering the environmental impacts has incentivized the investigation of biomass and biofuels as possible alternative sources for energy supply. Among the others, oxygenated bio-derived molecules such as alcohols, esters, acids, aldehydes, and furans are attractive substances as chemical feedstock and for sustainable energy production. Indeed, the presence of oxygen atoms limits the production of aromatic compounds, improves combustion efficiency (thus heat production) and alleviates the formation of carbon soot. On the other hand, the variability of their composition has represented one of the major challenges for the complete characterization of combustion behaviour. This work gives an overview of the current understanding of the detailed chemical mechanisms, as well as experimental investigations characterizing the combustion process of these species, with an emphasis on the laminar burning velocity and the ignition delay time. From the review, the common intermediates for the most relevant functional groups and combustion of biofuels were identified. The gathered information can be intended for the sake of core mechanism generation.


Author(s):  
Nguyen Minh Tien Nguyen

This study presents the effect of ignition energy (Eig) on ignition delay time (tdelay) and uncertainty of laminar burning velocity (Su0) measurement of lean methane/air mixture in a constant volume combustion chamber. The mixture at an equivalence ratio of 0.6 is ignited using a pair of electrodes at the 2-mm spark gap. Eig is measured by integrating the product of voltage V(t) and current I(t) signals during a discharge period. The in-chamber pressure profiles are analyzed using the pressure-rise method to obtain tdelay and Su0. Su0 approximates 8.0 cm/s. Furthermore, the increasing Eig could shorten tdelay, leading to a faster combustion process. However, when Eig is greater than a critical value, called minimum reliable ignition energy (MRIE), the additional elevating Eig has the marginal effect on tdelay and Su0. The existence of MRIE supports to optimize the ignition systems and partly explains why extreme-high Eig>> MRIE has less contribution to engine performance.


Author(s):  
A. G. Korotkikh ◽  
◽  
V. A. Arkhipov ◽  
I. V. Sorokin ◽  
E. A. Selikhova ◽  
...  

The paper presents the results of ignition and thermal behavior for samples of high-energy materials (HEM) based on ammonium perchlorate (AP) and ammonium nitrate (AN), active binder and powders of Al, B, AlB2, and TiB2. A CO2 laser with a heat flux density range of 90-200 W/cm2 was used for studies of ignition. The activation energy and characteristics of ignition for the HEM samples were determined. Also, the ignition delay time and the surface temperature of the reaction layer during the heating and ignition for the HEM samples were determined. It was found that the complete replacement of micron-sized aluminum powder by amorphous boron in a HEM sample leads to a considerable decrease in the ignition delay time by a factor of 2.2-2.8 at the same heat flux density due to high chemical activity and the difference in the oxidation mechanisms of boron particles. The use of aluminum diboride in a HEM sample allows one to reduce the ignition delay time of a HEM sample by a factor of 1.7-2.2. The quasi-stationary ignition temperature is the same for the AlB2-based and AlB12-based HEM samples.


Author(s):  
Haoqiang Sheng ◽  
Xiaobin Huang ◽  
Zhijia Chen ◽  
Zhengchuang Zhao ◽  
Hong Liu

2021 ◽  
Vol 230 ◽  
pp. 111426
Author(s):  
Saja Almohammadi ◽  
Mireille Hantouche ◽  
Olivier P. Le Maître ◽  
Omar M. Knio

2021 ◽  
Vol 223 ◽  
pp. 98-109
Author(s):  
Khaiyom Hakimov ◽  
Farhan Arafin ◽  
Khalid Aljohani ◽  
Khalil Djebbi ◽  
Erik Ninnemann ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document