Infiltration-excess runoff properties of dryland floodplain soil types under simulated rainfall conditions

Latex (natural polymer) and poly-DADMAC (synthetic polymer) were applied to a red brown earth (Alfisol) and a Wiesenboden (Mollisol). Run-off, infiltration, sediment loss and water stable aggregates were measured after subjecting the soils to simulated rainfall. Water retention of latex and poly-DADMAC amended soils was determined. The MED test for hydrophobicity was also carried out for the latex-treated soil. Latex decreased run-off and erosion, and increased infiltration on both soils. Poly-DADMAC minimized run-off and erosion, and increased infiltration on the Wiesenboden. It increased run-off and decreased infiltration on the red-brown earth; however, it still decreased erosion. Latex increased the percentage of water-stable aggregates > 2 mm on the red-brown earth, but it had less effect on the Wiesenboden. Poly-DADMAC decreased the percentage of water-stable aggregates < 0.125 mm on both soils after simulated rainfall. Both latex and poly-DADMAC had little effect on water retention of the red-brown earth and the Wiesenboden. Application of 1.5 g kg-1 of latex increased MED values of both soils, to give values that indicate moderate water-repellence but should not affect plant growth. Generally, latex was more effective on the red-brown earth and poly-DADMAC was more effective on the Wiesenboden. It seems that latex can be effective on all soil types, but poly-DADMAC will have more effect on clay soils.

Download Full-text

Abrasive wear of polymer/steel gear drives

Progress in Agricultural Engineering Sciences ◽

10.1556/progress.4.2008.1 ◽

2008 ◽

Vol 4 (1) ◽

pp. 1-26

Author(s):

Gábor Kalácska

Keyword(s):

Wear Resistance ◽

Abrasive Wear ◽

Material Selection ◽

Solid Particles ◽

Soil Types ◽

General View ◽

Modern Engineering ◽

Clean Environment ◽

Engineering Polymers ◽

Plastic Gears

Research was performed on the friction, wear and efficiency of plastic gears made of modern engineering polymers and their composites both in a clean environment (adhesive sliding surfaces) and in an environment contaminated with solid particles and dust (abrasive), with no lubrication at all. The purpose is to give a general view about the results of abrasive wear tests including seven soil types as abrasive media. At the first stage of the research silicious sand was applied between the meshing gears and the wear of plastic and steel gears was evaluated and analyzed from the point of different material properties (elongation at break, hardness, yield stress, modulus of elasticity) and its combinations. The different correlations between the experienced wear and material features are also introduced. At the second stage of the project the abrasive sand was replaced with different physical soil types. The abrasive wear of gears is plotted in the function of soil types. The results highlight on the considerable role of physical soil types on abrasive wear resistance and the conclusions contain the detailed wear resistance. The results offer a new tribology database for the operation and maintenance of agricultural machines with the opportunity of a better material selection according to the dominant soil type. This can finally result longer lifetime and higher reliability of wearing plastic/steel parts.

Download Full-text

Effects of heavy metals on soil invertase enzyme activity in different soil types

Land Contamination & Reclamation ◽

10.2462/09670513.941 ◽

2010 ◽

Vol 18 (2) ◽

pp. 175-180

Author(s):

Rajesh K. Verma ◽

Dharam Veer Yadav ◽

Chandra Pal Singh ◽

Archna Suman ◽

Asha Gaur

Keyword(s):

Heavy Metals ◽

Enzyme Activity ◽

Soil Types

Download Full-text

Status of Food Security in Banten Province, Indonesia

10.31227/osf.io/fcvpm ◽

2019 ◽

Author(s):

Weksi Budiaji

Keyword(s):

Population Dynamics ◽

Food Security ◽

Arable Land ◽

Secondary Data ◽

Disaster Risk ◽

Soil Types ◽

Indicator Variables ◽

Cereal Production ◽

The Status ◽

Vast Area

This paper discusses the status of food security in Banten Province, Indonesia based on regional and city characteristics. Secondary data is used and is analyzed descriptively covering population dynamics, the population living in poverty, cereal production, disaster risk and soil types. Tangerang Region is found to have the largest population with the greatest number of people living in poverty among the regions and cities in Banten Province. Cereal production is dominated by the regions rather than the cities due to their vast area. Regarding arable land, flooding is the most threatening disaster in the major rice producing areas. In order to identify the distributions of regions and cities regarding food security, three indicator variables of food security dimensions are plotted, namely, cereal normative consumption, proportion of the population living in poverty, and proportion of malnourished babies. The three regions of Pandeglang Region, Lebak Region and Serang Region are grouped together in a less secure group.

Download Full-text