scholarly journals The volcanic ash dispersion simulation of Soputan with PUFF Lagrangian method

2021 ◽  
Vol 1869 (1) ◽  
pp. 012200
Author(s):  
M Delina ◽  
T S Oktafiandariento ◽  
R Fahdiran
2011 ◽  
Vol 11 (9) ◽  
pp. 4333-4351 ◽  
Author(s):  
A. Stohl ◽  
A. J. Prata ◽  
S. Eckhardt ◽  
L. Clarisse ◽  
A. Durant ◽  
...  

Abstract. The April–May, 2010 volcanic eruptions of Eyjafjallajökull, Iceland caused significant economic and social disruption in Europe whilst state of the art measurements and ash dispersion forecasts were heavily criticized by the aviation industry. Here we demonstrate for the first time that large improvements can be made in quantitative predictions of the fate of volcanic ash emissions, by using an inversion scheme that couples a priori source information and the output of a Lagrangian dispersion model with satellite data to estimate the volcanic ash source strength as a function of altitude and time. From the inversion, we obtain a total fine ash emission of the eruption of 8.3 ± 4.2 Tg for particles in the size range of 2.8–28 μm diameter. We evaluate the results of our model results with a posteriori ash emissions using independent ground-based, airborne and space-borne measurements both in case studies and statistically. Subsequently, we estimate the area over Europe affected by volcanic ash above certain concentration thresholds relevant for the aviation industry. We find that during three episodes in April and May, volcanic ash concentrations at some altitude in the atmosphere exceeded the limits for the "Normal" flying zone in up to 14 % (6–16 %), 2 % (1–3 %) and 7 % (4–11 %), respectively, of the European area. For a limit of 2 mg m−3 only two episodes with fractions of 1.5 % (0.2–2.8 %) and 0.9 % (0.1–1.6 %) occurred, while the current "No-Fly" zone criterion of 4 mg m−3 was rarely exceeded. Our results have important ramifications for determining air space closures and for real-time quantitative estimations of ash concentrations. Furthermore, the general nature of our method yields better constraints on the distribution and fate of volcanic ash in the Earth system.


2017 ◽  
Vol 10 (12) ◽  
pp. 4705-4726 ◽  
Author(s):  
Armin Geisinger ◽  
Andreas Behrendt ◽  
Volker Wulfmeyer ◽  
Jens Strohbach ◽  
Jochen Förstner ◽  
...  

Abstract. A new backscatter lidar forward operator was developed which is based on the distinct calculation of the aerosols' backscatter and extinction properties. The forward operator was adapted to the COSMO-ART ash dispersion simulation of the Eyjafjallajökull eruption in 2010. While the particle number concentration was provided as a model output variable, the scattering properties of each individual particle type were determined by dedicated scattering calculations. Sensitivity studies were performed to estimate the uncertainties related to the assumed particle properties. Scattering calculations for several types of non-spherical particles required the usage of T-matrix routines. Due to the distinct calculation of the backscatter and extinction properties of the models' volcanic ash size classes, the sensitivity studies could be made for each size class individually, which is not the case for forward models based on a fixed lidar ratio. Finally, the forward-modeled lidar profiles have been compared to automated ceilometer lidar (ACL) measurements both qualitatively and quantitatively while the attenuated backscatter coefficient was chosen as a suitable physical quantity. As the ACL measurements were not calibrated automatically, their calibration had to be performed using satellite lidar and ground-based Raman lidar measurements. A slight overestimation of the model-predicted volcanic ash number density was observed. Major requirements for future data assimilation of data from ACL have been identified, namely, the availability of calibrated lidar measurement data, a scattering database for atmospheric aerosols, a better representation and coverage of aerosols by the ash dispersion model, and more investigation in backscatter lidar forward operators which calculate the backscatter coefficient directly for each individual aerosol type. The introduced forward operator offers the flexibility to be adapted to a multitude of model systems and measurement setups.


2016 ◽  
Vol 176-177 ◽  
pp. 29-42 ◽  
Author(s):  
Gabriela C. Mulena ◽  
David G. Allende ◽  
Salvador E. Puliafito ◽  
Susan G. Lakkis ◽  
Pablo G. Cremades ◽  
...  

2010 ◽  
pp. 507-526 ◽  
Author(s):  
Peter W. Webley ◽  
Kenneson G. Dean ◽  
Jonathan Dehn ◽  
John E. Bailey ◽  
Rorik Peterson

2020 ◽  
Vol 20 (3) ◽  
pp. 269-275
Author(s):  
Jongsun Sun ◽  
Jae-kwang Ahn ◽  
Haseong Lee ◽  
Eui-Hong Hwang ◽  
Duk Kee Lee

A volcanic eruption is a kind of global natural disaster that can occur suddenly and cause great damage to humankind. During the eruption, the magma causes fatal damage to life and property in areas near the volcano, and nearby countries are affected by the spread of volcanic ash, causing secondary damage due to air and soil pollution. Near the Korean peninsula, there exists an active volcano that can spread volcanic ash over long distances by erupting above Volcanic Explosivity Index (VEI) 4. Volcanoes in Japan have been known to cause considerable volcanic ash damage on the Korean Peninsula during eruption. Accordingly, the Korea Meteorological Administration is developing technology to predict and monitor volcanic ash spread using satellite images. However, despite the fact that empirical models for volcanic ash diffusion range prediction are used during volcanic eruptions, continuous improvement is needed for accurate information prediction. In this study, satellite images were analyzed not for the predicted distance of volcanic ash clouds, but for the actual distance of volcanic ash dispersion in cases where the volcanic ashes dispersed in the direction of the Korean peninsula. Of the 3,880 volcanoes that erupted in Japan over the last four years, 111 cases were identified where the height and spread distance of the volcanic ash that erupted toward the Korean Peninsula can be confirmed. In addition, the actual volcanic eruption cases and modeling results were analyzed to determine the extent of volcanic ash spread, and a hypothetical scenario was tested to quantify the direct damage of the volcanic ash. From the analysis of the volcanic ash spread through the virtual simulations, it was found that the height of the volcanic ash, the direction of the wind, and wind speed during volcanic eruption were important factors.


Sign in / Sign up

Export Citation Format

Share Document