Numerical study of the main rotor steep descent modes in the vortex ring state area

2021 ◽  
Vol 1925 (1) ◽  
pp. 012004
Author(s):  
P Makeev ◽  
Yu Ignatkin ◽  
A Shomov
2019 ◽  
Vol 304 ◽  
pp. 02011
Author(s):  
Wienczyslaw Stalewski ◽  
Katarzyna Surmacz

Computational investigations of the Vortex Ring State (VRS) on a helicopter main rotor have been conducted. The VRS phenomenon is a condition of powered flight that occurs most frequently during the vertical or nearly vertical descent of a rotorcraft. The characteristic feature of the VRS is a torus-shaped vortex around a rotor. The occurrence of this extensive vortex structure is a dangerous phenomenon that usually causes sudden decrease of main-rotor thrust, finally leading to an increase of the rate of descent and vibration level, disturbances of a helicopter balance, deterioration of manoeuvrability and deficit of power. The investigations presented in the paper, have been conducted based on computational methodology developed and implemented by the Authors. The methodology is based on a coupling of several methods of Computational Fluid Dynamics and Flight Dynamic. The approach consists of calculation of unsteady aerodynamic forces acting on the flying rotorcraft by simultaneous solution of the URANS equations, the equations of motion of the helicopter as well as the equations describing fluid-structure-interaction phenomena. Flow effects caused by rotating rotor blades, are modelled using a simplified approach based on the Virtual Blade Model. Using the described methodology, a series of helicopter flight simulations, in a vicinity of the VRS boundaries, have been conducted. Selected results of these simulations have been discussed in the paper.


2020 ◽  
Vol 92 (9) ◽  
pp. 1327-1337
Author(s):  
Wienczyslaw Stalewski ◽  
Katarzyna Surmacz

Purpose This paper aims to present the novel methodology of computational simulation of a helicopter flight, developed especially to investigate the vortex ring state (VRS) – a dangerous phenomenon that may occur in helicopter vertical or steep descent. Therefore, the methodology has to enable modelling of fast manoeuvres of a helicopter such as the entrance in and safe escape from the VRS. The additional purpose of the paper is to discuss the results of conducted simulations of such manoeuvres. Design/methodology/approach The developed methodology joins several methods of computational fluid dynamics and flight dynamic. The approach consists of calculation of aerodynamic forces acting on rotorcraft, by solution of the unsteady Reynold-averaged Navier–Stokes (URANS) equations using the finite volume method. In parallel, the equations of motion of the helicopter and the fluid–structure-interaction equations are solved. To reduce computational costs, the flow effects caused by rotating blades are modelled using a simplified approach based on the virtual blade model. Findings The developed methodology of computational simulation of fast manoeuvres of a helicopter may be a valuable and reliable tool, useful when investigating the VRS. The presented results of conducted simulations of helicopter manoeuvres qualitatively comply with both the results of known experimental studies and flight tests. Research limitations/implications The continuation of the presented research will primarily include quantitative validation of the developed methodology, with respect to well-documented flight tests of real helicopters. Practical implications The VRS is a very dangerous phenomenon that usually causes a sudden decrease of rotor thrust, an increase of the descent rate, deterioration of manoeuvrability and deficit of power. Because of this, it is difficult and risky to test the VRS during the real flight tests. Therefore, the reliable computer simulations performed using the developed methodology can significantly contribute to increase helicopter flight safety. Originality/value The paper presents the innovative and original methodology for simulating fast helicopter manoeuvres, distinguished by the original approach to flight control as well as the fact that the aerodynamic forces acting on the rotorcraft are calculated during the simulation based on the solution of URANS equations.


Fluids ◽  
2021 ◽  
Vol 6 (2) ◽  
pp. 70
Author(s):  
Xudong An ◽  
Lin Jiang ◽  
Fatemeh Hassanipour

In many industrial applications, a permeable mesh (porous screen) is used to control the unsteady (most commonly vortex) flows. Vortex flows are known to display intriguing behavior while propagating through porous screens. This numerical study aims to investigate the effects of physical properties such as porosity, Reynolds number, inlet flow dimension, and distance to the screen on the flow behavior. The simulation model includes a piston-cylinder vortex ring generator and a permeable mesh constructed by evenly arranged rods. Two methods of user-defined function and moving mesh have been applied to model the vortex ring generation. The results show the formation, evolution, and characteristics of the vortical rings under various conditions. The results for vorticity contours and the kinetic energy dissipation indicate that the physical properties alter the flow behavior in various ways while propagating through the porous screens. The numerical model, cross-validated with the experimental results, provides a better understanding of the fluid–solid interactions of vortex flows and porous screens.


2000 ◽  
Vol 45 (4) ◽  
pp. 318-320 ◽  
Author(s):  
Chengjian He ◽  
C. S. Lee ◽  
Weibin Chen

2019 ◽  
Vol 62 (2) ◽  
pp. 244-253
Author(s):  
Yu. M. Ignatkin ◽  
P. V. Makeev ◽  
V. I. Shaidakov ◽  
A. I. Shomov

2004 ◽  
Vol 49 (2) ◽  
pp. 160-175 ◽  
Author(s):  
J. Gordon Leishman ◽  
Mahendra J. Bhagwat ◽  
Shreyas Ananthan

2010 ◽  
Vol 22 (9) ◽  
pp. 097101 ◽  
Author(s):  
M. Cheng ◽  
J. Lou ◽  
T. T. Lim
Keyword(s):  

2014 ◽  
Vol 26 (10) ◽  
pp. 103602 ◽  
Author(s):  
M. Cheng ◽  
J. Lou ◽  
T. T. Lim

Sign in / Sign up

Export Citation Format

Share Document