scholarly journals Identification of Crustal Thickness in Central Part of Sumatra Using Teleseismic Receiver Function Method

2021 ◽  
Vol 2110 (1) ◽  
pp. 012001
Author(s):  
P Ariyanto ◽  
M D Atthonthowi ◽  
B Pranata ◽  
B S Prayitno
Keyword(s):  
Receiver Function ◽  
Crustal Thickness ◽  
S Wave ◽  
Volcanic Zone ◽  
Isostatic Compensation ◽  
The Earth ◽  
Receiver Function Method ◽  
Back Arc ◽  
Inversion Techniques ◽  
And Inversion

Abstract The Central part of Sumatra is a region that has a high potential for earthquakes. This research intended to determine the crustal thickness of the earth, P and S wave velocity profiles, and vp/vs value in the Central part of Sumatra using stacking H-k and inversion techniques based on the analysis of receiver function. This study utilized teleseismic earthquake data with a distance of 30° to 90° from the station and magnitude more than 6 (M>6). The stations used in this study were 3 BMKG broadband stations located in 3 zones, the fore arc ridge zone (SISI), the volcanic zone (PLSI) and the back arc zone (TPRI). The crustal thickness varies in the fore arc ridge zone (SISI) estimated 17.8 km, volcanic zone (PLSI) reaches 29.7 km and the back arc zone (TPRI) reaches 34 km. The crustal thickness is quite thick under the PLSI and thicker beneath TPRI station. These possibly due to the effect of topography and isostatic compensation in the station. However, whether there is a correlation between crustal thickness and topography needs further research using more stations. The highest vp/vs value was found in the volcanic zone of 1.9, that might be associated with the presence partial melting beneath the station. Meanwhile, the vp/vs value in the back arc zone is 1.72, indicating a relatively more homogeneous structure.

Mapping crustal structure of the Nechako–Chilcotin plateau using teleseismic receiver function analysis,

2014 ◽  
Vol 51 (4) ◽  
pp. 407-417 ◽  
Author(s):  
H.S. Kim ◽  
J.F. Cassidy ◽  
S.E. Dosso ◽  
H. Kao
Keyword(s):  
Wave Velocity ◽  
Crustal Structure ◽  
Velocity Structure ◽  
Receiver Function ◽  
Function Analysis ◽  
Crustal Thickness ◽  
Receiver Functions ◽  
S Wave ◽  
Low Velocity ◽  
Velocity Models

This paper presents results of a passive-source seismic mapping study in the Nechako–Chilcotin plateau of central British Columbia, with the ultimate goal of contributing to assessments of hydrocarbon and mineral potential of the region. For the present study, an array of nine seismic stations was deployed in 2006–2007 to sample a wide area of the Nechako–Chilcotin plateau. The specific goal was to map the thickness of the sediments and volcanic cover, and the overall crustal thickness and structural geometry beneath the study area. This study utilizes recordings of about 40 distant earthquakes from 2006 to 2008 to calculate receiver functions, and constructs S-wave velocity models for each station using the Neighbourhood Algorithm inversion. The surface sediments are found to range in thickness from about 0.8 to 2.7 km, and the underlying volcanic layer from 1.8 to 4.7 km. Both sediments and volcanic cover are thickest in the central portion of the study area. The crustal thickness ranges from 22 to 36 km, with an average crustal thickness of about 30–34 km. A consistent feature observed in this study is a low-velocity zone at the base of the crust. This study complements other recent studies in this area, including active-source seismic studies and magnetotelluric measurements, by providing site-specific images of the crustal structure down to the Moho and detailed constraints on the S-wave velocity structure.

scholarly journals Crustal thickness estimation in Indonesia using receiver function method

2021 ◽  
Vol 873 (1) ◽  
pp. 012086
Author(s):  
M F Fauzi ◽  
A Anggraini ◽  
A Riyanto ◽  
D Ngadmanto ◽  
W Suryanto
Keyword(s):  
Receiver Function ◽  
Vertical Component ◽  
Crustal Thickness ◽  
Radial Component ◽  
Receiver Functions ◽  
Frequency Noise ◽  
Seismic Wave Velocity ◽  
The North ◽  
Central Java ◽  
Receiver Function Method

Abstract The existence of seismic wave velocity difference in the Earth crust and mantle creates the possibility to use earthquake data for estimating the crustal thickness utilizing the Ps conversion phase in the boundary. The radial component signal was deconvolved from the vertical component in the frequency domain to estimate receiver function for Indonesia region. We implemented the water level deconvolution techniques with a Gaussian filter of 2.5 Hz to eliminate the high frequency noise in the receiver function. The H-k stacking technique was performed to all receiver functions from each event to predict the crustal thickness and the Vp/Vs ratio below the stations. We analyzed ten azimuthally distributed teleseismic earthquakes recorded by 108 stations of BMKG. The result shows that the crustal thickness in Indonesia varies from 20 to 39.9 km. The western part of Sumatera, northern part of Sulawesi Island, and North Maluku region show generally thinner crust with value about 20 to 25 km. The North Sumatera, Central Java, and East Java show a considerably thicker crust of up to 36 km. Furthermore, our result also reveals a difference of crustal thickness about 5 km with the previous studies.

Seismic P-wave receiver function modelling of Archean cratonic crust: A global perspective

2020 ◽  
Author(s):  
Poulami Roy ◽  
Kajaljyoti Borah
Keyword(s):  
Continental Crust ◽  
Receiver Function ◽  
Function Analysis ◽  
Crustal Thickness ◽  
Global Perspective ◽  
P Wave ◽  
Evolution Process ◽  
S Wave ◽  
Economic Significance ◽  
Formation And Evolution

<p>Cratons are representative of the oldest cores of continental crusts. Study of cratons is important  as they preserve the pristine nature of continental crusts as well as they have economic significance as a major source of the world's mineral deposits. The crustal thickness, crustal composition, structure and physical properties of crust-mantle transition (the Moho) are the key parameters for understanding the formation and evolution of continental crust. The ratio of  seismic P-wave and S-wave velocity (Vp/Vs) is used as a parameter to understand the petrologic nature of the Earth's crust. Using these parameters, we address the crustal properties of all Archean cratons. The teleseismic P-wave receiver function analysis reveals that all the Eoarchean (4-3.6 Ga) cratons (Superior, North Atlantic Craton, North China Craton, Yilgarn, Zimbabwe, Kaapvaal) have crustal thickness ranges between 34-42 km and Vp/Vs ratio 1.68-1.79, the Paleoarchean (3.6-3.2 Ga) cratons (Baltic shield, Pilbara, Tanzania, Grunehogna) have 29-52 km crustal thickness and Vp/Vs ratio 1.7-1.85, the Mesoarchean (3.2-2.8 Ga) cratons (Sao Francisco, Guapore, Yangtze, Antananarivo) have 36-53 km thickness and Vp/Vs ratio 1.7-1.9, and Neoarchean (2.8-2.5 Ga) cratons (Guiana, Anabar, Gawler, Napier, Tarim) have 36-59 km thickness and Vp/Vs ratio 1.64-1.95. The nature of crust-mantle transition is overall sharp and flat.  We also found that the crusts which are stabilized earlier, are thinner compared to the later stabilized crusts. Our findings are well-correlated with the craton evolution process predicted by Durrheim and Mooney (1994), where older crusts are thin due to delamination process and relatively younger crusts are thick due to basaltic underplating. Our result of higher Vp/Vs ratio in the relatively younger crusts corroborates with the mafic nature of the crust whereas the older crusts are felsic-intermediate resulting lower Vp/Vs ratio. Our study is unique as it includes most of the global cratons and suggests a global model of continental crust formation and evolution process.</p>

A new analytical method for finding the upper mantle velocity structure from P and S wave travel times of deep earthquakes

1969 ◽  
Vol 59 (2) ◽  
pp. 755-769
Author(s):  
K. L. Kaila
Keyword(s):  
Velocity Structure ◽  
Focal Depth ◽  
Least Square ◽  
Travel Times ◽  
S Wave ◽  
The Earth ◽  
Straight Line ◽  
Wave Travel ◽  
Deep Focus ◽  
Mantle Velocity

abstract A new analytical method for the determination of velocity at the hypocenter of a deep earthquake has been developed making use of P- and S-wave travel times. Unlike Gutenberg's method which is graphical in nature, the present method makes use of the least square technique and as such it yields more quantitative estimates of the velocities at depth. The essential features of this method are the determination from the travel times of a deep-focus earthquake the lower and upper limits Δ1 and Δ2 respectively of the epicentral distance between which p = (dT/dΔ) in the neighborhood of inflection point can be considered stationary so that the travel-time curve there can be approximated to a straight line T = pΔ + a. From p = (1/v*) determined from the straight line least-square fit made on the travel-time observation points between Δ1 and Δ2 for various focal depths, upper-mantle velocity structure can be obtained by making use of the well known relation v = v*(r0 − h)/r0, h being the focal depth of the earthquake, r0 the radius of the Earth, v* the apparent velocity at the point of inflection and v the true velocity at that depth. This method not only gives an accurate estimate of p, at the same time it also yields quite accurate value of a which is a function of focal depth. Calibration curves can be drawn between a and the focal depth h for various regions of the Earth where deep focus earthquakes occur, and these calibration curves can then be used with advantage to determine the focal depths of deep earthquakes in those areas.

Seismic Structure and Tectonic Evolution of Borneo and Sulawesi

2021 ◽  
Author(s):  
Harry Telajan Linang ◽  
Amy Gilligan ◽  
Jennifer Jenkins ◽  
Tim Greenfield ◽  
Felix Tongkul ◽  
...  
Keyword(s):  
Subduction Zones ◽  
Receiver Function ◽  
Leading Edge ◽  
Sedimentary Basins ◽  
Crustal Thickness ◽  
The Philippines ◽  
Seismic Structure ◽  
Eurasian Plate ◽  
Seismic Stations ◽  
Preliminary Results

<div> <div> <div> <p>Borneo is located at the centre of Southeast Asia, which is one of the most active tectonic regions on Earth due to the subduction of the Indo-Australian plate in the south and the Philippines Sea plate in the east. Borneo resides on the leading edge of the Sundaland block of the Eurasian plate and exhibits lower rates of seismicity when compared to the surrounding regions due to its intraplate setting. Sulawesi, an island which lies just southeast of Borneo, is characterised by intense seismicity due to multiple subduction zones in its vicinity. The tectonic relationship between the two islands is poorly understood, including the provenance of their respective lithospheres, which may have Eurasian and/or East Gondwana origin.</p> <p>Here, we present recent receiver function (RF) results from temporary and permanent broadband seismic stations in the region, which can be used to help improve our understanding of the crust and mantle lithosphere beneath Borneo and Sulawesi. We applied H-K stacking, receiver function migration and inversion to obtain reliable estimates of the crustal thickness beneath the seismic stations. Our preliminary results indicate that the crust beneath Sabah (in northern Borneo), which is a post-subduction setting, appears to be much more complex and is overall thicker (more than 35 km) than the rest of the island. In addition, we find that crustal thickness varies between different tectonic blocks defined from previous surface mapping, with the thinnest crust (23 to 25 km) occurring beneath Sarawak in the west-northwest as well as in the east of Kalimantan.</p> <p>We also present preliminary results from Virtual Deep Seismic Sounding (VDSS) in northern Borneo, where from the RF results we know that there is thick and complex crust. VDSS is able to produce well constrained crustal thickness results in regions where the RF analysis has difficulty recovering the Moho, likely due to complexities such as thick sedimentary basins and obducted ophiolite sequences.</p> </div> </div> </div>

Processing and Inversion Techniques for Multicomponent Induction Log Data

2001 ◽  
Author(s):  
B.F. Kriegshäuser ◽  
O.N. Fanini ◽  
L. Yu ◽  
M. Grammer
Keyword(s):  
Log Data ◽  
Inversion Techniques ◽  
And Inversion
Sign in / Sign up

Export Citation Format

Share Document