scholarly journals The effect of polyethylene glycol addition on the synthesis of solid acid catalyst and its applications in esterification reaction

2021 ◽  
Vol 1010 ◽  
pp. 012034
Author(s):  
S Julaika ◽  
W Widiyastuti ◽  
H Setyawan
Keyword(s):  
Polyethylene Glycol ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Esterification Reaction

scholarly journals Sulfonated Mesoporous Silica-Carbon Composite Derived from a Silicate-Polyethylene Glycol Gel and Its Application as Solid Acid Catalysts

2021 ◽  
Vol 17 (1) ◽  
pp. 13-21
Author(s):  
Shofiyya Julaika ◽  
Agus Farid Fadli ◽  
Widiyastuti Widiyastuti ◽  
Heru Setyawan
Keyword(s):  
Acetic Acid ◽  
Polyethylene Glycol ◽  
Mesoporous Silica ◽  
Surface Area ◽  
Sodium Silicate ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Carbon Composite ◽  
Esterification Reaction

Solid acid catalyst is a promising alternative to the counterpart homogeneous acid for esterification reaction from the viewpoint of reusability and environmental concerns. This work aims to develop sulfonated mesoporous silica-carbon composite as solid acid catalyst for the esterification. The catalyst was synthesized from sodium silicate as the silica precursor and polyethylene glycol (PEG) as both carbon precursor and template via a sol-gel route in an aqueous system. Then, it was carbonized to produce mesoporous silica-carbon composite. Using the proposed method, the surface area of the silica-carbon composite could reach as high as 1074.21 m2/g. Although the surface area decreased to 614.02 m²/g when it was functionalized with sulfonate groups, the composite had a high ionic capacity of 5.3 mEq/g and exhibited high catalytic activity for esterification reaction of acetic acid with ethanol. At a reaction temperature of 80 °C, the acetic acid conversion reached 76.55% in 4 h. In addition, the catalyst had good reusability, which can be comparable with the commercial catalyst Foltrol F-007. It appears that the sulfonated silica-carbon composite prepared from sodium silicate using PEG as the carbon source a promising candidate as catalyst for esterification and the related area. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

scholarly journals Titanate nanotubes-bonded organosulfonic acid as solid acid catalyst for synthesis of butyl levulinate

RSC Advances ◽  
2018 ◽  
Vol 8 (7) ◽  
pp. 3657-3662 ◽  
Author(s):  
Shuolin Zhou ◽  
Dabo Jiang ◽  
Xianxiang Liu ◽  
Yiping Chen ◽  
Dulin Yin
Keyword(s):  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Titanate Nanotubes ◽  
Esterification Reaction ◽  
Hybrid Catalyst

TiO2 nanotubes-bonded organosulfonic acid as a hybrid catalyst exhibited better activity and good reusability for esterification reaction.

scholarly journals Optimization of Biodiesel Production from Waste Cooking Oil Using S–TiO2/SBA-15 Heterogeneous Acid Catalyst

Catalysts ◽  
2019 ◽  
Vol 9 (1) ◽  
pp. 67 ◽  
Author(s):  
Muhammad Hossain ◽  
Md Siddik Bhuyan ◽  
Abul Md Ashraful Alam ◽  
Yong Seo
Keyword(s):  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Catalyst Loading ◽  
Esterification Reaction ◽  
Impregnation Method ◽  
Cooking Oil ◽  
Heterogeneous Acid Catalyst

The aim of this research was to synthesize, characterize, and apply a heterogeneous acid catalyst to optimum biodiesel production from hydrolyzed waste cooking oil via an esterification reaction, to meet society’s future demands. The solid acid catalyst S–TiO2/SBA-15 was synthesized by a direct wet impregnation method. The prepared catalyst was evaluated using analytical techniques, X-ray diffraction (XRD), Scanning electron microscopy (SEM) and the Brunauer–Emmett–Teller (BET) method. The statistical analysis of variance (ANOVA) was studied to validate the experimental results. The catalytic effect on biodiesel production was examined by varying the parameters as follows: temperatures of 160 to 220 °C, 20–35 min reaction time, methanol-to-oil mole ratio between 5:1 and 20:1, and catalyst loading of 0.5%–1.25%. The maximum biodiesel yield was 94.96 ± 0.12% obtained under the optimum reaction conditions of 200 °C, 30 min, and 1:15 oil to methanol molar ratio with 1.0% catalyst loading. The catalyst was reused successfully three times with 90% efficiency without regeneration. The fuel properties of the produced biodiesel were found to be within the limits set by the specifications of the biodiesel standard. This solid acid catalytic method can replace the conventional homogeneous catalyzed transesterification of waste cooking oil for biodiesel production.

scholarly journals Synthesis, Characterization and Catalytic Performance ofH3SiW12O40/SiO2Prepared by Sol-Gel Technique

2011 ◽  
Vol 2011 ◽  
pp. 1-6 ◽  
Author(s):  
W. N. R. W. Isahak ◽  
M. Ismail ◽  
N. M. Nordin ◽  
J. M. Jahim ◽  
M. A. Yarmo
Keyword(s):  
Heteropoly Acid ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Sol Gel ◽  
Acid Catalyst ◽  
Catalytic Performance ◽  
Environmentally Benign ◽  
Esterification Reaction ◽  
Silicotungstic Acid ◽  
Gel Technique

The purpose of this work is to study the synthesis, characterization, and catalytic performance of two types of solid heteropoly acid catalysts, namely, silicotungstic acid bulk (STAB) and STA-silica sol-gel (STA-SG) compared with sulfuric acid. From the XPS analyses, there was a significant formation of W-O-Si, W-O-W, and Si-O-Si bonding in STA-SG compared to that in STAB. The main spectra of O1s (90.74%, 531.5 eV) followed by other O1s peak (9.26%, 532.8 eV) were due to the presence of W-O-W and W-O-Si bonds, respectively. The STA-SG catalyst was found to be the more environmentally benign solid acid catalyst for the esterification reaction between oleic acid and glycerol due to its lower toxicity supported by silica via sol-gel technique. In addition, the ease of separation for STA-SG catalyst was attributed to its insoluble state in the product phase. The esterification products were then analysed by FTIR and HPLC. Both the H2SO4and the STAB gave high conversion of 100% and 98% but at a lower selectivity of GME with 81.6% and 89.9%, respectively. On the contrary, the STA-SG enabled a conversion of 94% but with a significantly higher GME selectivity of 95%, rendering it the more efficient solid acid catalyst.

scholarly journals Synthesis of Some Aromatic and Aliphatic Esters Using WO3/ZrO2 Solid Acid Catalyst under Solvent Free Conditions

2020 ◽  
Vol 32 (9) ◽  
pp. 2153-2157
Author(s):  
VIJAYA CHARAN GUGULOTH ◽  
SATYANARAYANA BATTU
Keyword(s):  
Surface Area ◽  
Tetragonal Phase ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Esterification Reaction ◽  
Impregnation Method ◽  
Simple Method ◽  
Solvent Free Conditions ◽  
Zro2 Catalyst

A simple method is delineated for the synthesis of substituted ester products in superior yields by esterification reaction under solvent unbound condition using tungsten upgraded ZrO2 solid acid catalyst at 353 K. The WO3/ZrO2 catalyst has been prepared by using impregnation method followed by calcination at 923 K over a period of 6 h in air atmosphere. SEM, XRD, FTIR, and BET surface area techniques were used to categorize this catalyst. Zirconia has both acidic and basic possessions which can be changed by incorporating suitable promoter atom like tungsten which in turn increases the surface area thereby enhancing the surface acidity. Impregnation of W6+ ions exhibits a strong influence on phase modification of zirconia from thermodynamically solid monoclinic to metastable tetragonal phase. Amalgamation of promoter W6+ will stabilize tetragonal phase which is active in catalyzing reactions. In esterification reaction WO3/ZrO2 catalyst was found to be stable, efficient and environmental friendly, effortlessly recovered by filtration, excellent yield of product and can be reusable efficiently.

Tungstophosphoric Acid Entrapped on Mesoporous Silica via Sol Gel Technique

2006 ◽  
Vol 11-12 ◽  
pp. 69-72
Author(s):  
Joon Ching Juan ◽  
Yarmo Mohd Ambar ◽  
Jing Chang Zhang
Keyword(s):  
Mesoporous Silica ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Sol Gel ◽  
Chemical Properties ◽  
Acid Catalyst ◽  
Tungstophosphoric Acid ◽  
Esterification Reaction ◽  
Heterogeneous Acid Catalyst ◽  
Gel Technique

The heterogeneous 12-tungstophosphoric acid (HPW) catalyst is becoming important in industrial processes for example in esterification reaction. A novel solid acid catalyst of HPW entrapped on mesoporous silica was synthesized by sol gel technique. Neutral template dodecylamine was introduced to obtain mesopores structure catalyst. The physical and chemical properties of the catalyst were characterized by XRD, nitrogen sorption and FTIR. In conclusion, this new type of mesoporous solid acid catalyst is a very promising heterogeneous acid catalyst for esterification reaction involving bulky molecules such as fatty acid.

Zinc oxide as a solid acid catalyst for esterification reaction

2015 ◽  
Vol 65 ◽  
pp. 20-23 ◽  
Author(s):  
Anjani Nagvenkar ◽  
Sajo Naik ◽  
Julio Fernandes
Keyword(s):  
Zinc Oxide ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Esterification Reaction
Sign in / Sign up

Export Citation Format

Share Document