scholarly journals Seismic Vulnerability and Risk of Losses Case Study Center of the City of Azogues

2021 ◽  
Vol 1203 (3) ◽  
pp. 032124
Author(s):  
Carlos Julio Calle Castro ◽  
Juan Sebastián Maldonado Noboa ◽  
Luis Mario Almache Sánchez

Abstract Ecuador is located in the Pacific Ring of Fire, a country with high risk and seismic sensitivity, evidenced by the 6.8-degree earthquake in Ambato in 1949, which left approximately 6000 dead, the 7.8-degree earthquake in Manabí and Esmeraldas in the year 2016 with 663 victims and 29672 buildings without the possibility of use. Currently there is a problem about seismic performance in reinforced concrete buildings, since many were built with old regulations; so, it is necessary to assess their vulnerability. Quito, Guayaquil and Cuenca, large cities in Ecuador, have formal studies of seismic vulnerability, mostly carried out by university students and teachers. In contrast, most small cities do not have these studies; or, they need to be updated to validate their results. This is the case of the city of Azogues. The objective of this research is to evaluate the vulnerability of structures using the Hazus methodology, adapted to Ecuador, in the downtown area of the city of Azogues, in structures located around the Central Park, to establish the seismic performance in reinforced concrete buildings. The Hazus methodology, which determines the vulnerability of buildings from fragility curves, which are entered with inputs as the capacity, performance level and drift curves calculated through Ecuadorian models. The capacity curves, depending on various aspects such as: the material, number of floors, spans between columns, among others; they vary from building to building. In this sense, capacity curves were defined for sets of buildings with similar characteristics, coinciding with the Hazus methodology. The performance levels and the displacements were calculated with the ETABS computer package. For fragility curves, the model that most real simulates the response of a structure is the non-linear analysis, because it considers the decrease in stiffness in columns and beams, as well as the deterioration of the properties of the materials. In this sense, there are fragility curves of Ecuadorian buildings for four levels. The earthquake readings enable the construction of a demand spectrum, which, when contrasted with the capacity spectrum, leads to the performance point. Its position sometimes varies per the elastic demand spectrum, which is diminished by its inelastic behavior. As the demand spectrum decreases, the damage will increase. Once the coordinates of the performance point are known, the fragility curves are used; and, the possible damages are defined, quantifying them in percentage.

2019 ◽  
Vol 21 ◽  
pp. 186-199 ◽  
Author(s):  
Ashim Adhikari ◽  
K. Rama Mohan Rao ◽  
Dipendra Gautam ◽  
Hemchandra Chaulagain

2020 ◽  
Vol 5 (2) ◽  
pp. 16
Author(s):  
Foteini Konstandakopoulou ◽  
George Hatzigeorgiou ◽  
Konstantinos Evangelinos ◽  
Thomas Tsalis ◽  
Ioannis Nikolaou

This study examines the relation between maximum seismic displacements and residual displacements for reinforced concrete building structures. In order to achieve a reliable relationship between these critical structural parameters for the seismic performance of concrete buildings, an extensive parametric study is conducted by examining the nonlinear behavior of numerous planar framed structures. In this work, dynamic inelastic analyses are executed to investigate the seismic behavior of two sets of frames. The first group consists of four planar frames which have been designed for seismic and vertical loads according to modern structural codes while the second group also consists of four frames, which have been designed for vertical loads only, in order to examine older structures that have been designed using codes with inadequate seismic provisions. These two sets of buildings are subjected to various earthquakes with different amplitudes in order to develop a large structural response databank. On the basis of this wide-ranging parametric investigation, after an appropriate statistical analysis, simple empirical expressions are proposed for a straightforward and efficient evaluation of maximum seismic displacements of reinforced concrete buildings structures from their permanent deformation. Permanent displacements can be measured in-situ after strong ground motions as a post-earthquake assessment. It can be concluded that the measure of permanent deformation can be efficiently used to estimate the post-seismic performance level of reinforced concrete buildings.


Sign in / Sign up

Export Citation Format

Share Document