scholarly journals Application of finite element method (FEM) to study stress-strain state and distribution of temperatures in cutting zone in turning of various structural materials by carbide tools with coatings of various composition and architecture

2019 ◽  
Vol 613 ◽  
pp. 012019 ◽  
Author(s):  
Alexey Vereschaka ◽  
Boris Mokritskii ◽  
Elena Mokritskaya ◽  
Oleg Sharipov ◽  
Catherine Sotova
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Strain State ◽  
Structural Materials ◽  
Stress Strain ◽  
Stress Strain State ◽  
Cutting Zone ◽  
Element Method

scholarly journals Choice of technologies of ensuring exploitation suitability of buildings in the underground construction area

Vestnik MGSU ◽  
2020 ◽  
pp. 452-461
Author(s):  
Emil Imran Оglu Alirzaev ◽  
Marina E. Dement'eva
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Strain State ◽  
The Finite Element Method ◽  
Underground Construction ◽  
Underground Structures ◽  
Stress Strain ◽  
Computer Complex ◽  
Stress Strain State ◽  
Element Method

Introduction. One of the serious problems in the construction of underground structures in a dense urban area is the occurrence of excess deformations of the foundations of operating buildings that fall into the zone of influence of underground construction. The subject of the study was the calculated justification of the modern technology of compensatory injection. The relevance of the task is determined by the fact that the choice of the most effective protection technology should be based not only on a comparison of technological precipitation with maximum permissible values, but also on the assessment of the possibility of monitoring and controlling the movements of the foundations of buildings and structures during construction and subsequent operation. The purpose of the study was to compare various methods of protecting the foundations of existing buildings and structures and justify the selection of the most effective of them for further implementation and dissemination in the design and construction of urban underground structures. Materials and methods. On the basis of the survey data of the operated building falling into the impact zone of excavation of the pit for the construction of the installation and shield chamber of the subway, the parameters of the stress-strain state of its foundations are studied by mathematical modeling. The problem was solved by the finite element method based on the software and computer complex Z_Soil v.18.24. Results. Based on the analysis of the results of the examination of the administrative building using the finite element method, a change in the parameters of the stress-strain state of the foundations was modeled with various technologies for strengthening it. In the course of solving the geotechnical problem, it was found that the minimum impact on the foundations of the building during the construction of the pit was obtained in the method of compensatory injection. The system of criteria for making a decision on choosing an effective way to ensure the suitability of buildings in the underground construction zone for operation is substantiated. Conclusions. The results of this work can be used to justify the choice of technology for prevention and control of excess deformations of foundations. The function for calculating the volume of injected material in the Z_Soil software and computer complex can be used to justify the consumption of materials and the economic efficiency of the technological solution.

Investigation of the stress-strain state of turbine rotors by the finite-element method

1982 ◽  
Vol 14 (8) ◽  
pp. 1119-1123 ◽  
Author(s):  
P. P. Gontarovskii ◽  
L. I. Gontarovskaya ◽  
G. A. Marchenko ◽  
Yu. I. Matyukhin
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Strain State ◽  
The Finite Element Method ◽  
Stress Strain ◽  
Stress Strain State ◽  
Turbine Rotors ◽  
Element Method

scholarly journals Analysis of stress-strain state of the naturally twisted rod bending by transverse force on the basis of the finite element method

2013 ◽  
Author(s):  
Н.В. Курбатова ◽  
Ю.А. Устинов ◽  
Е.С. Чумакова
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Strain State ◽  
Transverse Force ◽  
The Finite Element Method ◽  
Stress Strain ◽  
Stress Strain State ◽  
Element Method

На основе метода однородных решений и численным интегрированием методом конечных элементов двумерных краевых задач, с помощью которых описываются решения задач Сен-Венана о чистом изгибе и изгибе поперечной силой естественно закрученного стержня, строится решение и на его основе проводится анализ напряженно-деформированного состояния стержня прямоугольного поперечного сечения для произвольных значений относительного угла закручивания τ0.

scholarly journals CALCULATION OF CULVERTS UNDER ROAD EMBANKMENTS USING THE SEMI-ANALYTICAL FINITE ELEMENT METHOD

2021 ◽  
Vol 9 (2) ◽  
pp. 56-60
Author(s):  
Mikhail Turko
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Strain State ◽  
Structural Mechanics ◽  
Stress Strain ◽  
Metal Structures ◽  
Bulk Solids ◽  
Stress Strain State ◽  
Corrugated Metal ◽  
Element Method

The article discusses the methodology for calculating corrugated metal structures used as culverts based on the semi-analytical finite element method. The calculation is carried out according to a non-deformable scheme using the load dependences obtained on the basis of the structural mechanics of bulk solids. Significant differences in the nature of the stress-strain state of corrugated structures in comparison with smooth shells is revealed.

Investigation of the stress-strain state of beams with different types of web perforation

2021 ◽  
Vol 103 (3) ◽  
pp. 79-87
Author(s):  
Ivan Pidgurskyi ◽  
Vasyl Slobodian ◽  
Denys Bykiv ◽  
Mykola Pidgurskyi
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Strain State ◽  
Analytical Calculation ◽  
Complex Stress ◽  
The Finite Element Method ◽  
Stress Strain ◽  
Advantages And Disadvantages ◽  
Stress Strain State ◽  
Element Method

This article is devoted to evaluating the effectiveness of I-beams with different web perforations: hexagonal, round, oval and elliptical. The technology of manufacturing of castellated beams is described. For the purpose of verification the analytical calculation of the beam with hexagonal web perforation and for comparison the calculation by the finite element method is given. To correctly assess the stress-strain state, the mesh of finite elements in the area of openings was concentrated. The results of maximum normal stresses and strains obtained by different methods were compared with each other and the efficiency of using the finite element method to determine the stress-strain state of castellated beams was proved. In the castellated beams there is a complex stress-strain state, which was confirmed in this work for the most characteristic shapes of openings. Beams with hexagonal, round, oval (horizontal and vertical), elliptical and elliptical (rotated by 45°) openings are considered in the article, their geometric parameters and characteristics as well as advantages and disadvantages are described. Beams with round openings are currently the most widely used. In addition, the parameters that affect the efficiency of castellated beams with oval (horizontal and vertical) and elliptical rotated by 45° openings were identified. In this work, it was found that the shape of the openings significantly affects the stress-strain state of the castellated beams, especially for hexagonal openings, which are mainly used so far. The stress distribution in the first opening for each of the considered types of perforations and the nature of the change of σmax in other openings is shown. The stress-strain state of castellated beams was studied using the finite element method. The results of this study are of practical value because they can be used when arranging the sections and openings of castellated beams.

Analysis of the Stress-Strain State of a Bridgman Specimen in Axial Tension by the Finite-Element Method

2021 ◽  
Author(s):  
Т. М. Lenkovskyi ◽  
Ya. L. Ivanytskyi ◽  
Yu. V. Molkov ◽  
Z. А. Duriagina ◽  
V. V. Kulyk ◽  
...  
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Strain State ◽  
The Finite Element Method ◽  
Stress Strain ◽  
Stress Strain State ◽  
Axial Tension ◽  
Element Method

Stress-strain state of turbine disks by means of the finite-element method

1978 ◽  
Vol 10 (1) ◽  
pp. 14-19
Author(s):  
A. L. Kvitka ◽  
P. P. Boroshko ◽  
S. D. Bobritskaya ◽  
A. I. Klimenko
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Strain State ◽  
The Finite Element Method ◽  
Stress Strain ◽  
Stress Strain State ◽  
Turbine Disks ◽  
Element Method
Sign in / Sign up

Export Citation Format

Share Document