Abstract
Vibratory conveying of a material point by harmonic longitudinal and polyharmonic normal vibrations of an inclined conveying surface is considered. The dependence of dimensionless conveying velocity – a ratio of velocity to the product of frequency and amplitude of longitudinal vibration – on several dimensionless parameters is investigated in the moving modes without hopping. Maximal conveying velocity is achieved at the certain values of normal vibration amplitudes and phase difference angle between the longitudinal and normal vibrations, which are called optimal. Their values are dependent on two dimensionless parameters: the inclination angle parameter – a ratio of an inclination angle tangent to a frictional coefficient, the intensive vibration coefficient – a ratio of the longitudinal amplitude of vibration to the amplitude of the first harmonic of normal vibration and frictional coefficient. In a condition of the intensive longitudinal vibration, when its amplitude significantly greater than amplitudes of normal vibration, dimensionless velocity is almost independent of the intensive vibration parameter and it depends only on inclination angle parameter, i.e. on inclination angle and frictional coefficient. The optimal values of harmonics' amplitudes of polyharmonic normal vibration are determined in dependence of inclination angle parameter with the number of harmonics from 2 to 7. The graphs of considered dependencies are presented and the most important values of parameters are presented in the table. Conclusions are made to determine the optimal vibration parameters and the problems of further research are indicated. The considered vibrations can be used in different vibratory conveying devices with electromagnetic drives.
Optimization of the geometry and calculation of the normal vibrations of the dendrimer with amine terminal groups
