Human-engineered auricular reconstruction (hEAR) by 3D-printed molding with human-derived auricular and costal chondrocytes and adipose-derived mesenchymal stem cells

2021 ◽  
Author(s):  
Shira Landau ◽  
Ariel A. Szklanny ◽  
Majd Machour ◽  
Ben Kaplan ◽  
Yulia Shandalov ◽  
...  

Abstract Microtia is a small, malformed external ear, which occurs at an incidence of 1-10 per 10,000 births. Autologous reconstruction using costal cartilage is the most widely accepted surgical microtia repair technique. Yet, the method involves donor-site pain and discomfort and relies on the artistic skill of the surgeon to create an aesthetic ear. This study employed novel tissue engineering techniques to overcome these limitations, by developing a clinical-grade, 3D-printed biodegradable auricle scaffold that formed stable, custom-made, neocartilage implants. The unique scaffold design combined strategically reinforced areas to maintain the complex topography of the outer ear and micropores to allow cell adhesion for the effective production of stable cartilage. The auricle construct was CT scan-based composed of a 3D-printed clinical-grade polycaprolactone (PCL) scaffold loaded with patient‐derived chondrocytes produced from either auricular cartilage or costal cartilage biopsies combined with adipose-derived MSCs. Cartilage formation was measured within the construct in vitro, and cartilage maturation and stabilization were observed 12 weeks after its subcutaneous implantation into a murine model. The proposed technology is simple and effective and is

2018 ◽  
Vol 20 (2) ◽  
pp. 136-140 ◽  
Author(s):  
Berke Özücer ◽  
Mehmet Emre Dinç ◽  
Ceki Paltura ◽  
İlker Koçak ◽  
Denizhan Dizdar ◽  
...  

2021 ◽  
Vol 11 (6) ◽  
pp. 2563
Author(s):  
Ivan Grgić ◽  
Vjekoslav Wertheimer ◽  
Mirko Karakašić ◽  
Željko Ivandić

Recent soft tissue studies have reported issues that occur during experimentation, such as the tissue slipping and rupturing during tensile loads, the lack of standard testing procedure and equipment, the necessity for existing laboratory equipment adaptation, etc. To overcome such issues and fulfil the need for the determination of the biomechanical properties of the human gracilis and the superficial third of the quadriceps tendons, 3D printed clamps with metric thread profile-based geometry were developed. The clamps’ geometry consists of a truncated pyramid pattern, which prevents the tendons from slipping and rupturing. The use of the thread application in the design of the clamp could be used in standard clamping development procedures, unlike in previously custom-made clamps. Fused deposition modeling (FDM) was used as a 3D printing technique, together with polylactic acid (PLA), which was used as a material for clamp printing. The design was confirmed and the experiments were conducted by using porcine and human tendons. The findings justify the usage of 3D printing technology for parts manufacturing in the case of tissue testing and establish independence from the existing machine clamp system, since it was possible to print clamps for each prepared specimen and thus reduce the time for experiment setup.


2021 ◽  
Vol 42 (Supplement_1) ◽  
pp. S25-S26
Author(s):  
Angela L F Gibson ◽  
James H Holmes ◽  
Jeffrey W Shupp ◽  
David Smith ◽  
Victor Joe ◽  
...  

Abstract Introduction Autograft (AG) is the standard of care for treatment of severe burns. While AG provides effective wound closure (WC), the procedure creates a donor site wound prone to pain and scarring. In a phase 1b trial, no deep partial-thickness (DPT) wound treated with a bioengineered allogeneic cellularized construct (BACC) required AG by Day 28 and WC at the BACC site was achieved in 93% of patients by Month (M) 3. This phase 3 study (NCT03005106) evaluated the efficacy and safety of this BACC in patients with DPT burns. Methods Enrolled patients were aged ≥18 years with 3–49% TBSA thermal burns on the torso or extremities. In each patient, two DPT areas (≤2,000 cm2 total) deemed comparable following excision were randomized to treatment with either cryopreserved BACC or AG. Coprimary endpoints were 1) the difference in percent area of BACC treatment site and AG treatment site autografted at M3 and 2) the proportion of patients achieving durable WC of the BACC treatment site without AG at M3. Ranked secondary endpoints were: 1) the difference between BACC and AG donor sites in average donor site pain intensity through Day 14; 2) the difference between BACC and AG donor site cosmesis at M3; and 3) the difference between BACC and AG treatment site cosmesis at M12. Safety assessments were performed in all patients through M12. Results Seventy-one patients were enrolled. By M3, there was a 96% reduction in mean percent area of BACC treatment sites that required AG, compared with AG treatment sites (4.3% vs 102.1%, respectively; P<.0001). BACC treatment resulted in durable WC at M3 without AG in 92% (95% CI: 85.6, 98.8; 59/64) of patients for whom data was available. By M3, mean donor site Patient and Observer Scar Assessment Scale (POSAS) observer total score (±SD) was significantly lower (more like normal skin) for BACC donor sites compared with AG donor sites (6.3 ± 1.71 vs 16.3 ± 7.71; P<.0001). At M12, mean POSAS observer total score (±SD) was 15.6 (± 8.34) for BACC treatment sites compared with 16.3 (± 9.41) for AG treatment sites (P=.4268). The most common BACC-related adverse event (AE) was pruritus, which occurred in 11 (15%) patients. All BACC-related AEs were mild or moderate in severity. Conclusions This phase 3 study achieved both coprimary endpoints, including significant autograft sparing and durable WC in DPT burns. Both donor site pain and donor site cosmesis were favorable outcomes of significantly reduced use of AG in BACC-treated patients. M12 POSAS for BACC did not differ significantly from AG. This BACC may offer a new treatment for severe burns to reduce or eliminate the need for AG. Applicability of Research to Practice This BACC has shown clinical benefit in patients with DPT thermal burns, potentially mitigating donor site morbidity. External Funding Stratatech, a Mallinckrodt Company; Funding and technical support for the Phase 3 clinical study were provided by the Biomedical Advanced Research and Development Authority (BARDA), under the Assistant Secretary for Preparedness and Response, within the U.S. Department of Health and Human Services, under Project BioShield Contract No. HHSO100201500027C.


2006 ◽  
Vol 31 (1) ◽  
pp. 6-13 ◽  
Author(s):  
S REUBEN ◽  
E EKMAN ◽  
K RAGHUNATHAN ◽  
R STEINBERG ◽  
J BLINDER ◽  
...  

2021 ◽  
Author(s):  
Shuang Lin ◽  
Yuanjia He ◽  
Meihan Tao ◽  
Aijun Wang ◽  
Qiang Ao

Abstract On account of the poor biocompatibility of synthetic prosthesis, millions of rhinoplasty recipients have been forced to choose autologous costal cartilage as grafts, which suffer from limited availability, morbidity at donor site and prolonged operation time. Here, as a promising alternative to autologous costal cartilage, we developed a novel xenogeneic costal cartilage and explored its feasibility as a rhinoplasty graft for the first time. Adopting an improved decellularization protocol, in which the ionic detergent was substituted by trypsin, the resulting decellularized graft was confirmed to preserve more structural components and better mechanics, and eliminate cellular components effectively. The in vitro and in vivo compatibility experiments demonstrated that the decellularized graft showed excellent biocompatibility and biosecurity. Additionally, the functionality assessment of rhinoplasty was performed in a rabbit model, and the condition of grafts after implantation was comprehensively evaluated. The optimized graft exhibited better capacity to reduce the degradation rate and maintain the morphology, in comparison to the decellularized costal cartilage prepared by conventional protocol. These findings indicate that this optimized graft derived from decellularized xenogeneic costal cartilage provides a new prospective for future investigations of rhinoplasty prosthesis and has great potential for clinical application.


Neurosurgery ◽  
2002 ◽  
Vol 50 (3) ◽  
pp. 510-517 ◽  
Author(s):  
Robert F. Heary ◽  
Richard P. Schlenk ◽  
Theresa A. Sacchieri ◽  
Dean Barone ◽  
Cristian Brotea

Sign in / Sign up

Export Citation Format

Share Document