Ground-motion amplification at the Colle di Roio ridge, central Italy: a combined effect of stratigraphy and topography

2016 ◽  
Vol 206 (1) ◽  
pp. 1-18 ◽  
Author(s):  
S. Hailemikael ◽  
L. Lenti ◽  
S. Martino ◽  
A. Paciello ◽  
D. Rossi ◽  
...  
2020 ◽  
Vol 80 (1) ◽  
pp. 179-199
Author(s):  
M. Moscatelli ◽  
G. Vignaroli ◽  
A. Pagliaroli ◽  
R. Razzano ◽  
A. Avalle ◽  
...  

AbstractNowadays, policies addressed to prevention and mitigation of seismic risk need a consolidated methodology finalised to the assessment of local seismic response in explosive volcanic settings. The quantitative reconstruction of the subsoil model provides a key instrument to understand how the geometry and the internal architecture of outcropping and buried geological units have influence on the propagation of seismic waves. On this regard, we present a multidisciplinary approach in the test area of the Stracciacappa maar (Sabatini Volcanic District, central Italy), with the aim to reconstruct its physical stratigraphy and to discuss how subsoil heterogeneities control the 1D and 2D local seismic response in such a volcanic setting. We first introduce a new multidisciplinary dataset, including geological (fieldwork and log from a 45-m-thick continuous coring borehole), geophysical (electrical resistivity tomographies, single station noise measurements, and 2D passive seismic arrays), and geotechnical (simple shear tests performed on undisturbed samples) approaches. Then, we reconstruct the subsoil model for the Stracciacappa maar in terms of vertical setting and distribution of its mechanical lithotypes, which we investigate for 1D and 2D finite element site response analyses through the application of two different seismic scenarios: a volcanic event and a tectonic event. The numerical modelling documents a significant ground motion amplification (in the 1–1.5 Hz range) revealed for both seismic scenarios, with a maximum within the centre of the maar. The ground motion amplification is related to both 1D and 2D phenomena including lithological heterogeneity within the upper part of the maar section and interaction of direct S-waves with Rayleigh waves generated at edges of the most superficial lithotypes. Finally, we use these insights to associate the expected distribution of ground motion amplification with the physical stratigraphy of an explosive volcanic setting, with insights for seismic microzonation studies and local seismic response assessment in populated environments.


2021 ◽  
Author(s):  
Pierluigi Pieruccini ◽  
Enrico Paolucci ◽  
Pier Lorenzo Fantozzi ◽  
Duccio Monaci Naldini ◽  
Dario Albarello

Abstract A general methodological approach is here discussed to integrate geological and geophysical information in seismic microzonation studies. In particular, the methodology aims at maximizing the exploitation of low-cost data for extensive preliminary assessment of ground motion amplification phenomena induced by the local seismostratigraphical configuration. Three main steps are delineated: a) the combination of geological/geomorphological analyses to develop an Engineering-Geological Model of the study area; b) targeted geophysical prospecting to provide an Engineering-Geological/Geophysical Model; c) evaluating effectiveness of Engineering-Geological/Geophysical Model by estimating expected ground motion amplification phenomena by the use of suitable computational tools. The workflow is illustrated by a case-study based on a set of villages in the Umbro-Marchean Apennine (Central Italy) damaged during the Seismic sequence occurred in Central Italy during 2016–2017.


Nature ◽  
10.1038/37586 ◽  
1997 ◽  
Vol 390 (6660) ◽  
pp. 599-602 ◽  
Author(s):  
Edward H. Field ◽  
Paul A. Johnson ◽  
Igor A. Beresnev ◽  
Yuehua Zeng

Geosciences ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 186
Author(s):  
Alessandro Todrani ◽  
Giovanna Cultrera

On 24 August 2016, a Mw 6.0 earthquake started a damaging seismic sequence in central Italy. The historical center of Amatrice village reached the XI degree (MCS scale) but the high vulnerability alone could not explain the heavy damage. Unfortunately, at the time of the earthquake only AMT station, 200 m away from the downtown, recorded the mainshock, whereas tens of temporary stations were installed afterwards. We propose a method to simulate the ground motion affecting Amatrice, using the FFT amplitude recorded at AMT, which has been modified by the standard spectral ratio (SSR) computed at 14 seismic stations in downtown. We tested the procedure by comparing simulations and recordings of two later mainshocks (Mw 5.9 and Mw 6.5), underlining advantages and limits of the technique. The strong motion variability of simulations was related to the proximity of the seismic source, accounted for by the ground motion at AMT, and to the peculiar site effects, described by the transfer function at the sites. The largest amplification characterized the stations close to the NE hill edge and produced simulated values of intensity measures clearly above one standard deviation of the GMM expected for Italy, up to 1.6 g for PGA.


2006 ◽  
Vol 5 (1) ◽  
pp. 27-43 ◽  
Author(s):  
F. Pacor ◽  
D. Bindi ◽  
L. Luzi ◽  
S. Parolai ◽  
S. Marzorati ◽  
...  

2019 ◽  
Vol 16 (3) ◽  
pp. 277-290
Author(s):  
Chao Han ◽  
Jiashun Yu ◽  
Wei-Zu Liu ◽  
Jian-Long Yuan ◽  
Xiao-Bo Fu ◽  
...  

Author(s):  
Nicola Tarque ◽  
Carlo G. Lai ◽  
Francesca Bozzoni ◽  
Enrico Miccadei ◽  
Tommaso Piacentini ◽  
...  

2001 ◽  
Vol 30 (5) ◽  
pp. 621-632 ◽  
Author(s):  
Roberto Villaverde ◽  
Gerard C. Pardoen ◽  
Sergio Carnalla

Sign in / Sign up

Export Citation Format

Share Document