scholarly journals Near-Source Simulation of Strong Ground Motion in Amatrice Downtown Including Site Effects

Geosciences ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 186
Author(s):  
Alessandro Todrani ◽  
Giovanna Cultrera
Keyword(s):  
Ground Motion ◽  
Site Effects ◽  
Central Italy ◽  
Strong Motion ◽  
Seismic Source ◽  
Spectral Ratio ◽  
Intensity Measures ◽  
Standard Spectral Ratio ◽  
Heavy Damage ◽  
Strong Ground

On 24 August 2016, a Mw 6.0 earthquake started a damaging seismic sequence in central Italy. The historical center of Amatrice village reached the XI degree (MCS scale) but the high vulnerability alone could not explain the heavy damage. Unfortunately, at the time of the earthquake only AMT station, 200 m away from the downtown, recorded the mainshock, whereas tens of temporary stations were installed afterwards. We propose a method to simulate the ground motion affecting Amatrice, using the FFT amplitude recorded at AMT, which has been modified by the standard spectral ratio (SSR) computed at 14 seismic stations in downtown. We tested the procedure by comparing simulations and recordings of two later mainshocks (Mw 5.9 and Mw 6.5), underlining advantages and limits of the technique. The strong motion variability of simulations was related to the proximity of the seismic source, accounted for by the ground motion at AMT, and to the peculiar site effects, described by the transfer function at the sites. The largest amplification characterized the stations close to the NE hill edge and produced simulated values of intensity measures clearly above one standard deviation of the GMM expected for Italy, up to 1.6 g for PGA.

Methodology to identify the reference rock sites in regions of medium-to-high seismicity: an application in Central Italy

2020 ◽  
Vol 222 (3) ◽  
pp. 2053-2067 ◽  
Author(s):  
Giovanni Lanzano ◽  
Chiara Felicetta ◽  
Francesca Pacor ◽  
Daniele Spallarossa ◽  
Paola Traversa
Keyword(s):  
Ground Motion ◽  
Site Effects ◽  
Site Response ◽  
Central Italy ◽  
Large Data ◽  
Spectral Ratio ◽  
Data Set ◽  
Standard Spectral Ratio ◽  
Resonance Frequencies ◽  
The Impact

SUMMARY To evaluate the site response using both empirical approaches (e.g. standard spectral ratio, ground motion models (GMMs), generalized inversion techniques, etc.) and numerical 1-D/2-D analyses, the definition of the reference motion, that is the ground motion recorded at stations unaffected by site-effects due to topographic, stratigraphic or basin effects, is needed. The main objective of this work is to define a robust strategy to identify the seismic stations that can be considered as reference rock sites, using six proxies for the site response: three proxies are related to the analysis of geophysical and seismological data (the repeatable site term from the residual analysis, the resonance frequencies from horizontal-to-vertical spectral ratios on noise or earthquake signals, the average shear wave velocity in the first 30 m); the remaining ones concern geomorphological and installation features (outcropping rocks or stiff soils, flat topography and absence of interaction with structures). We introduce a weighting scheme to take into account the availability and the quality of the site information, as well as the fulfillment of the criterion associated to each proxy. We also introduce a hierarchical index, to take into account the relevance of the proposed proxies in the description of the site effects, and an acceptance threshold for reference rock sites identification. The procedure is applied on a very large data set, composed by accelerometric and velocimetric waveforms, recorded in Central Italy in the period 2008–2018. This data set is composed by more than 30 000 waveforms relative to 450 earthquakes in the magnitude range 3.2–6.5 and recorded by more than 450 stations. A total of 36 out of 133 candidate stations are identified as reference sites: the majority of them are installed on rock with flat topography, but this condition is not sufficient to guarantee the absence of amplifications, especially at high frequencies. Seismological analyses are necessary to exclude stations affected by resonances. We test the impact of using these sites by calibrating a GMMs. The results show that for reference rock sites the median predictions are reduced down to about 45 per cent at short periods in comparison to the generic rock motions.

scholarly journals Earthquake ground shaking hazard assessment for the Lower Hutt and Porirua areas, New Zealand

1992 ◽  
Vol 25 (4) ◽  
pp. 286-302 ◽  
Author(s):  
R. J. Van Dissen ◽  
J. J. Taber ◽  
W. R. Stephenson ◽  
S. Sritheran ◽  
S. A. L. Read ◽  
...  
Keyword(s):  
Ground Motion ◽  
Strong Motion ◽  
Spectral Ratio ◽  
Fine Sand ◽  
Geographic Variations ◽  
Ground Acceleration ◽  
Ground Shaking ◽  
Earthquake Scenarios ◽  
Shear Wave Velocities ◽  
Strong Ground

Geographic variations in strong ground shaking expected during damaging earthquakes impacting on the Lower Hutt and Porirua areas are identified and quantified. Four ground shaking hazard zones have been mapped in the Lower Hutt area, and three in Porirua, based on geological, weak motion, and strong motion inputs. These hazard zones are graded from 1 to 5. In general, Zone 5 areas are subject to the greatest hazard, and Zone 1 areas the least. In Lower Hutt, zones 3 and 4 are not differentiated and are referred to as Zone 3-4. The five-fold classification is used to indicate the range of relative response. Zone 1 areas are underlain by bedrock. Zone 2 areas are typically underlain by compact alluvial and fan gravel. Zone 3-4 is underlain, to a depth of 20 m, by interfingered layers of flexible (soft) sediment (fine sand, silt, clay, peat), and compact gravel and sand. Zone 5 is directly underlain by more than 10 m of flexible sediment with shear wave velocities in the order of 200 m/s or less. The response of each zone is assessed for two earthquake scenarios. Scenario 1 is for a moderate to large, shallow, distant earthquake that results in regional Modified Mercalli intensity V-VI shaking on bedrock. Scenario 2 is for a large, local, but rarer, Wellington fault earthquake. The response characterisation for each zone comprises: expected Modified Mercalli intensity; peak horizontal ground acceleration; duration of strong shaking; and amplification of ground motion with respect to bedrock, expressed as a Fourier spectral ratio, including the frequency range over which the most pronounced amplification occurs. In brief, high to very high ground motion amplifications are expected in Zone 5, relative to Zone 1, during a scenario 1 earthquake. Peak Fourier spectral ratios of 10-20 are expected in Zone 5, relative to Zone 1, and a difference of up to three, possibly four, MM intensity units is expected between the two zones. During a scenario 2 event, it is anticipated that the level of shaking throughout the Lower Hutt and Porirua region will increase markedly, relative to scenario 1, and the average difference in shaking between each zone will decrease.

Observed Variation of Earthquake Motion across a Basin—Taipei City

1998 ◽  
Vol 14 (1) ◽  
pp. 115-133 ◽  
Author(s):  
Chin-Hsiung Loh ◽  
Jeng-Yaw Hwang ◽  
Tzay-Chyn Shin
Keyword(s):  
Ground Motion ◽  
Seismic Waves ◽  
Principal Direction ◽  
Response Spectrum ◽  
Strong Motion ◽  
Seismic Source ◽  
Spectral Ratio ◽  
Site Amplification ◽  
Taipei Basin ◽  
Basin Effects

Local site amplification of sedimentary deposit during earthquakes is an important issue in strong ground motion analysis. The phenomenon is more obvious for sediment basin. From the strong-motion instrumentation network of Taipei basin, the ground motion characteristics of the basin effects are studied from two seismic events: the June 5, 1994 earthquake with ML = 6.57 and the June 25, 1995 earthquake with ML = 6.50. The objective is to investigate the effects of the basin structure on the patterns of the recorded ground motions. The analyses include: (1) response spectrum and spectral ratio analyses; (2) correlation of seismic source, PGA distribution and strong-motion duration with site amplification, (3) principal direction analysis of seismic waves in the basin. The observed variations of ground motion across the basin are different from each other because of the basin effect. It means that for the Taipei basin, the basin effects for shallow sources are going to be much more significant than for the deep sources.

Hellenic Strong-Motion Database with Uniformly Assigned Source and Site Metadata for the Period 1972–2015

2021 ◽  
Author(s):  
Basil Margaris ◽  
Emmanuel M. Scordilis ◽  
Jonathan P. Stewart ◽  
David M. Boore ◽  
Nikos Theodoulidis ◽  
...  
Keyword(s):  
Ground Motion ◽  
Earthquake Engineering ◽  
Source Parameters ◽  
Model Development ◽  
Strong Motion ◽  
Seismic Source ◽  
Fault Plane Solutions ◽  
Intensity Measures ◽  
Finite Fault ◽  
Fault Parameters

Abstract We present a Hellenic database of intensity measures from uniformly processed strong ground motion recordings, together with metadata on earthquake source attributes and recording site conditions. The database consists of information from 471 earthquakes between 1973 and 2015 that produced 2993 usable recordings from 333 sites. A key element of this work is a unified presentation of data from two major data providers that operate in Greece (Institute of Engineering Seismology and Earthquake Engineering and the Institute of Geodynamics, National Observatory of Athens) along with a university-operated local urban array (University of Patras). Consistent procedures were applied to develop source parameters that include hypocenter locations, moment magnitudes (directly estimated or derived using a conversion procedure), fault-plane solutions, and finite-fault parameters (generally, for events with M>6.0). The time-averaged shear-wave velocity in the upper 30 m parameter is provided for all 333 recording sites based on geophysical measurements where available (102) and proxy-based estimates otherwise. Most events are in the magnitude range of 3.8–7, occurred at shallow hypocentral depths (<30  km), and provide data for rupture distances generally between 10 and 300 km. The combined ground motion, seismic source, and site database is anticipated to be useful for engineering applications, including ground-motion model development and time series selection for response-history analyses.

scholarly journals Site effects estimation and their effects on strong ground motion at Amatrice village (Central Italy)

2020 ◽  
Author(s):  
Daniela Famiani ◽  
Giovanna Cultrera ◽  
Fabrizio Cara ◽  
Giuseppe Di Giulio ◽  
Giuliano Milana ◽  
...  
Keyword(s):  
Ground Motion ◽  
Site Effects ◽  
Strong Ground Motion ◽  
Central Italy ◽  
Strong Ground

Characteristics of strong ground motion data recorded in the Gubbio sedimentary basin (Central Italy)

2006 ◽  
Vol 5 (1) ◽  
pp. 27-43 ◽  
Author(s):  
F. Pacor ◽  
D. Bindi ◽  
L. Luzi ◽  
S. Parolai ◽  
S. Marzorati ◽  
...  
Keyword(s):  
Ground Motion ◽  
Strong Ground Motion ◽  
Sedimentary Basin ◽  
Central Italy ◽  
Motion Data ◽  
Strong Ground

Hard as a rock? Looking for typical and atypical reference sites in the Greek network

2021 ◽  
Author(s):  
Olga-Joan Ktenidou ◽  
Faidra Gkika ◽  
Erion-Vasilis Pikoulis ◽  
Christos Evangelidis
Keyword(s):  
Ground Motion ◽  
Site Response ◽  
Time Budget ◽  
Strong Motion ◽  
General Rule ◽  
Spectral Ratio ◽  
Reference Sites ◽  
Motion Models ◽  
Ground Motion Variability

<p>Although it is nowadays desirable and even typical to characterise site conditions in detail at modern recording stations, this is not yet a general rule in Greece, due to the large number and geographical dispersion of stations. Indeed, most of them are still characterised merely through geological descriptions or proxy-based parameters, rather than through in-situ measurements. Considering: 1. the progress made in recent years with sophisticated ground motion models and the need to define region-specific rock conditions based on data, 2. the move towards large open-access strong-motion databases that require detailed site metadata, and 3. that Greek-provenance recordings represent a significant portion of European seismic data, there are many reasons to improve our understanding of site response at these stations. Moreover, it has been shown recently in several regions that even sites considered as rock can exhibit amplification and ground motion variability, which has given rise to more scientific research into the definition of reference sites. For Greece, in-situ-characterisation campaigns for the entire network would impose unattainable time/budget constraints; so, instead, we implement alternative empirical approaches using the recordings themselves, such as the horizontal-to-vertical spectral ratio technique and its variability. We present examples of 'well-behaved', typical rock sites, and others whose response diverges from what is assumed for their class.</p><p> </p>

30 Ooctober 2020 Samos-Sigacik Earthquake: On Strong Ground Motion and Local Site Amplification

2021 ◽  
Author(s):  
Eser Çakti ◽  
Karin Sesetyan ◽  
Ufuk Hancilar ◽  
Merve Caglar ◽  
Emrullah Dar ◽  
...  
Keyword(s):  
Ground Motion ◽  
Structural Damage ◽  
Strong Ground Motion ◽  
Epicentral Distance ◽  
Strong Motion ◽  
Aegean Sea ◽  
Site Amplification ◽  
Local Site ◽  
Basin Effects ◽  
Strong Ground

<p>The Mw 6.9 earthquake that took place offshore between the Greek island of Samos and Turkey’s İzmir province on 30 October 2020 came hardly as a surprise. Due to the extensional tectonic regime of the Aegean and high deformation rates, earthquakes of similar size frequently occur in the Aegean Sea on fault segments close to the shores of Turkey, affecting the settlements on mainland Turkey and on the Greek Islands. Samos-Sigacik earthquake had a normal faulting mechanism. It was recorded by the strong motion networks in Turkey and Greece. Although expected, the earthquake was an  outstanding event in the sense of  highly localized, significant levels of building damage as a result of amplified ground motion levels. This presentation is an overview of strong ground motion characteristics of this important event both regionally and locally. Mainshock records suggest that local site effects, enhanced by basin effects could be responsible for structural damage in central Izmir, the third largest city of Turkey located at 60-70 km epicentral distance. We installed a seven-station network in Bayraklı and Karşıyaka districts of İzmir within three days of the mainshock in search of site and basin effects.  Through analysis of recorded aftershocks we explore the amplification characeristics of soils in the two aforementioned districts  and try to understand the role basin effects might have played in the resulting ground motion levels and consequently damage. </p>

Sign in / Sign up

Export Citation Format

Share Document