Liquid Chromatographic Determination of Primidone in Tablets: Collaborative Study

1985 ◽  
Vol 68 (1) ◽  
pp. 85-87 ◽  
Author(s):  
Stanley E Roberts
Keyword(s):  
Quantitative Determination ◽  
Mobile Phase ◽  
Collaborative Study ◽  
Chromatographic Determination ◽  
Coefficients Of Variation ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract Six laboratories collaboratively studied a liquid chromatographic (LC) method for the quantitative determination of primidone in tablets. Two lots each of commercially prepared 50 and 250 mg tablets and 2 authentic mixtures, at 50 and 250 mg levels, were sent to each collaborator. Samples were dissolved in the mobile phase, filtered, and injected into the chromatograph. Average recoveries for the 8 samples ranged from 97.5 to 101.2%, and coefficients of variation ranged from 0.53 to 3.01%. The LC method has been adopted interim official first action.

Collaborative Study of Gas-Liquid Chromatographic Determination of Methaqualone in Pharmaceutical and Clandestine Preparations

1977 ◽  
Vol 60 (4) ◽  
pp. 935-939 ◽  
Author(s):  
Harold F Hanel
Keyword(s):  
Liquid Chromatography ◽  
Quantitative Determination ◽  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Gas Liquid Chromatography ◽  
Coefficients Of Variation ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract Eight laboratories collaboratively studied a procedure for the quantitative determination of methaqualone. HCl in pharmaceutical and clandestine preparations. Methaqualone is extracted from an aqueous bicarbonate solution into chloroform and quantitated by gas-liquid chromatography on a 3% OV-1 column. Tetraphenylethylene is used as an internal standard. Two commercial preparations and 4 sample mixtures prepared by the author were studied. Recoveries for the 4 prepared samples ranged from 100.0 to 102.6%, and the coefficients of variation ranged from 1.58 to 4.15% for the 6 samples studied. The method has been adopted as official first action.

Liquid Chromatographic Determination of Carbofuran in Technical and Formulated Products: Collaborative Study

1986 ◽  
Vol 69 (5) ◽  
pp. 915-918
Author(s):  
Edward J Kikta ◽  
◽  
E Bane ◽  
A Burns ◽  
A Christensen ◽  
...  
Keyword(s):  
Mobile Phase ◽  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Data Sets ◽  
Matched Pairs ◽  
Reverse Phase ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract A liquid chromatographic (LC) method for the analysis of technical and formulated carbofuran samples was evaluated in a collaborative study. Carbofuran is determined by reverse phase LC, using a water-methanol mobile phase and acetophenone as internal standard, and detected at 280 nm. Twelve samples, 5 formulations and technical matched pairs, were analyzed by 17 collaborating laboratories. Accuracy and variability of results are typical of large LC data sets. The method has been adopted official first action.

Gas-Liquid Chromatographic Determination of Tetradif on Technical and Formulations: Collaborative Study

1981 ◽  
Vol 64 (4) ◽  
pp. 829-832
Author(s):  
Bram Van Rossum ◽  
Albertus Martijn ◽  
James E Launer ◽  
◽  
E C Calamita ◽  
...  
Keyword(s):  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Flame Ionization ◽  
Coefficients Of Variation ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract The gas-liquid chromatographic determination of tetradifon technical and formulations was collaboratively studied in duplicate with 12 laboratories. Six samples were dissolved in dichloroethane with n-hexacosane as the internal standard, chromatographed on a column of 3% SE-52, and detected by flame ionization. The average coefficients of variation were 1.2% for the 2 technical samples, 1.6% for the 2 wettable powders, and 1.5% for the 2 emulsifiable concentrates. The method has been adopted official first action.

Liquid Chromatographic Determination of Triadimefon in Technical and Formulated Products: Collaborative Study

1985 ◽  
Vol 68 (3) ◽  
pp. 586-589
Author(s):  
Stephen C Slahck
Keyword(s):  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Normal Phase ◽  
Coefficients Of Variation ◽  
Liquid Chromatographic Method ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic ◽  
Technical Products

Abstract A liquid chromatographic method for the determination of triadimefon (Bayleton™) in triadimefon technical and formulated products has been developed and subjected to a collaborative study with 7 participating collaborators. Formulations were extracted with mobile solvent and analyzed by normal phase chromatography, with 4-chlorophenyl sulfoxide as an internal standard. Collaborators were furnished with standards and samples of technical products, 50% wettable powders, and 25% wettable powders for analysis. Coefficients of variation of the values obtained on these samples were 1.42, 0.82, and 1.05%, respectively. The method has been adopted official first action.

scholarly journals Liquid Chromatographic Determination of Mebendazole and its Metabolites, Aminomebendazole and Hydroxymebendazole, in Eel Muscle Tissue

1996 ◽  
Vol 79 (3) ◽  
pp. 645-651 ◽  
Author(s):  
Christiaan A J Hajee ◽  
Nel Haagsma
Keyword(s):  
Muscle Tissue ◽  
Mobile Phase ◽  
Solid Phase ◽  
Chromatographic Determination ◽  
Extraction Column ◽  
Phase Extraction ◽  
Coefficients Of Variation ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract An analytical method is presented for liquid chromatographic (LC) determination of mebendazole (MBZ), hydroxymebendazole (MBZ-OH), and aminomebendazole (MBZ-NH2) in eel muscle tissue. Muscle tissue is extracted with ethyl acetate at pH 7.5. After addition of n-hexane, the extract is cleaned up and concentrated on an aminopropyl solid-phase extraction column. The test solutions are analyzed isocratically on a ChromSpher B LC column with acetonitrile–phosphate buffer, pH 6.2, as mobile phase. Limits of detection and quantitation were 0.7 and 1.1 ¼g/kg, respectively, for MBZOH; 1.4 and 2.3 ¼g/kg, respectively, for MBZ; and 1.5 and 2.1 ¼g/kg, respectively, for MBZ-NH2. Interand intraday coefficients of variation were 3.5 and 3.4%, respectively, for MBZ-OH; 2.5 and 3.1%, respectively, for MBZ; and 5.8 and 4.8%, respectively, for MBZ-NH2. Mean recoveries were 90% for MBZ, 74% for MBZ-NH2, and 92% for MBZ-OH. A linear range of applicability of at least 10–1000 ¼g/kg was found for each analyte. Incurred MBZ-NH2 (181.3 ¼g/kg) was identified in eel muscle tissue apart from MBZ (23.7 ¼g/kg) after 48 h exposure ina treatment bath containing MBZ at 1 mg/L.

Liquid Chromatographic Determination of Coumarin Anticoagulants in Tablets: Collaborative Study

1987 ◽  
Vol 70 (5) ◽  
pp. 834-836
Author(s):  
Ella S Moore
Keyword(s):  
Mobile Phase ◽  
Collaborative Study ◽  
Chromatographic Determination ◽  
Content Uniformity ◽  
Photometric Detection ◽  
Warfarin Sodium ◽  
Liquid Chromatographic Method ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract A liquid chromatographic method for the determination of coumarin anticoagulants in tablets was collaboratively studied by 7 laboratories. The method uses an octadecylsilane-bonded microparticulate column, tetrahydrofuran-methanol-water-acetic acid mobile phase, and photometric detection at 311 nm. Each collaborator received samples of warfarin sodium, phenprocoumon, and dicumarol as a synthetic composite and as commercial individual and composited tablets. Pooled average assay values for synthetic and commercial tablet samples of warfarin sodium were 101.6 and 99.5%, respectively, with a combined reproducibility SD of 2.38% (CV = 2.37%) and combined repeatability SD of 1.49% (CV = 1.49%). Pooled average (SD) assay values for dicumarol and phenprocoumon commercial samples were 98.0 (2.27) and 101.3% (4.00), respectively. The content uniformity determinations of 2 mg warfarin sodium and 25 mg dicumarol tablets indicated average tablet contents (range) of 99.5% (91.0-116.0) and 98.0% (89.8-108.8), respectively. The method has been approved interim official first action

Liquid Chromatographic Determination of Simazine, Atrazine, and Propazine Residues in Catfish

1995 ◽  
Vol 78 (4) ◽  
pp. 1067-1071 ◽  
Author(s):  
David C Holland ◽  
Robert K Munns ◽  
José E Roybal ◽  
Jeffrey A Hurlbut ◽  
Austin R Long
Keyword(s):  
Ethyl Acetate ◽  
Petroleum Ether ◽  
Simultaneous Determination ◽  
Mobile Phase ◽  
Chromatographic Determination ◽  
Triazine Herbicides ◽  
Coefficients Of Variation ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract A liquid chromatographic (LC) method is described for the simultaneous determination of the triazine herbicides, simazine (SIM), atrazine (ATZ), and propazine (PRO) in the 12.5–100 ppb range in catfish. The herbicides are extracted from catfish homogenates with ethyl acetate, followed by solvent partitioning between acetonitrile and petroleum ether and additional cleanup on a C18 cartridge. A Supelcosil LC-18-DB column is used for LC separation, and UV determination is at 220 nm. The isocratic mobile phase is a mixture of methanol, acetonitrile, and water. Mean recoveries from catfish were 88.7, 96.9, and 91.7%; standard deviations were 6.84,7.78, and 6.26%; and coefficients of variation were 7.72,8.03, and 6.82% for SIM, ATZ, and PRO, respectively.

Liquid Chromatographic Determination of Colchicine in Pharmaceuticals: Collaborative Study

1985 ◽  
Vol 68 (5) ◽  
pp. 1051-1055
Author(s):  
Richard D Thompson
Keyword(s):  
Collaborative Study ◽  
Chromatographic Determination ◽  
Pharmaceutical Dosage Forms ◽  
Coefficients Of Variation ◽  
Drug Sample ◽  
Buffer Mixture ◽  
Liquid Chromatographic Determination ◽  
Bulk Drug ◽  
Liquid Chromatographic

Abstract A liquid chromatographic (LC) method for the determination of colchicine in pharmaceutical dosage forms and the bulk drug was evaluated in an interlaboratory study which included 13 participating laboratories. The method involves extraction (or dissolution) of the active ingredient with methanol-water (1 + 1), followed by filtration of the extract and reverse phase LC using an octy lsilane bonded phase column and UV detection at 254 nm. The mobile phase consists of a methanolphosphate buffer mixture (pH = 5.5). Three commercial tablet formulations (0.5-0.6 mg colchicine/tablet), 1 synthetic injectable preparation (0.510 mg colchicine/mL), and 1 bulk drug sample were assayed in duplicate by the proposed method. The reproducibility and repeatability standard deviations based on nonpooled results for each sample ranged from 0.0062 mg/mL to 0.0147 mg/tablet and from 0.0037 mg/ mL to 0.0127 mg/tablet, respectively; the corresponding coefficients of variation ranged from 1.21 to 2.54% and from 0.73 to 2.19%, respectively. The mean recovery from the synthetic injectable formulation was 100.0%. The method has been adopted official first action

Liquid Chromatographic Determination of Bendiocarb in Technical Materials and Wettable Powder Formulations: Collaborative Study

1986 ◽  
Vol 69 (5) ◽  
pp. 908-911
Author(s):  
Peter L Carter ◽  
Keith C Overton ◽  
◽  
P G Baker ◽  
O O Bennett ◽  
...  
Keyword(s):  
Statistical Data ◽  
Collaborative Study ◽  
Internal Standard ◽  
Chromatographic Determination ◽  
Liquid Chromatograph ◽  
Coefficients Of Variation ◽  
Liquid Chromatographic Method ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract A liquid chromatographic method for determination of bendiocarb in technical materials and wettable powders was tested by 12 collaborators. Bendiocarb is dissolved in acetonitrile containing 0.1% propiophenone as internal standard. This solution is analyzed on a liquid chromatograph utilizing a reverse phase (C18) column. The compound is detected at 254 nm and peak area is used for quantitation. The 3 different materials studied contained 20, 80, and nominally 100% bendiocarb. Each was examined in duplicate to provide the necessary matched pairs. Collaborators approved of the ease and simplicity of the method and, in particular, the way the method can be applied to automatic injection assemblies. The statistical data show acceptable precision of the method: Reproducibility coefficients of variation were 20% material, 2.04%; 80% material, 1.02%; and nominal 100% material (technical product), 0.64%. The method has been adopted official first action.

High Pressure Liquid Chromatographic Determination of Oxazepam Dosage Forms: Collaborative Study

1983 ◽  
Vol 66 (4) ◽  
pp. 864-866
Author(s):  
Eileen S Bargo ◽  
◽  
E Aranda ◽  
C Bonnin ◽  
S Hauser ◽  
...  
Keyword(s):  
High Pressure ◽  
Collaborative Study ◽  
Chromatographic Determination ◽  
Reverse Phase ◽  
High Pressure Liquid Chromatographic ◽  
Coefficients Of Variation ◽  
Liquid Chromatographic Method ◽  
Liquid Chromatographic Determination ◽  
Liquid Chromatographic

Abstract A reverse phase high pressure liquid chromatographic method for the determination of oxazepam in tablets and capsules was collaboratively studied by 9 laboratories. Collaborators were supplied with 6 samples that included synthetic and commercial formulations. Tablet and capsule composites are diluted with methanol and filtered. Oxazepam is determined at 254 nm by using a C18 column. Mean recoveries of oxazepam from synthetic tablet and capsule formulations were 97.2 and 99.0%, respectively. Mean coefficients of variation for tablets and capsules ranged from 1.85 to 2.86%. The method has been adopted official first action.

Sign in / Sign up

Export Citation Format

Share Document