Approximate entropy of respiratory rate and tidal volume during weaning from mechanical ventilation

1998 ◽  
Vol 26 (11) ◽  
pp. 1817-1823 ◽  
Author(s):  
Milo Engoren
2016 ◽  
Vol 44 (12) ◽  
pp. 312-312
Author(s):  
Hulya Turkan ◽  
Saud Alrawaf ◽  
Mohammed Alsaggaf ◽  
Guillermo Gutierrez

Critical Care ◽  
2021 ◽  
Vol 25 (1) ◽  
Author(s):  
Oscar F. C. van den Bosch ◽  
Ricardo Alvarez-Jimenez ◽  
Harm-Jan de Grooth ◽  
Armand R. J. Girbes ◽  
Stephan A. Loer

AbstractThe respiratory system reacts instantaneously to intrinsic and extrinsic inputs. This adaptability results in significant fluctuations in breathing parameters, such as respiratory rate, tidal volume, and inspiratory flow profiles. Breathing variability is influenced by several conditions, including sleep, various pulmonary diseases, hypoxia, and anxiety disorders. Recent studies have suggested that weaning failure during mechanical ventilation may be predicted by low respiratory variability. This review describes methods for quantifying breathing variability, summarises the conditions and comorbidities that affect breathing variability, and discusses the potential implications of breathing variability for anaesthesia and intensive care.


Author(s):  
Amelia A. Lowell

The main goal of mechanical ventilation is to unload the respiratory muscles to facilitate oxygenation and ventilation. This is accomplished by providing a minute ventilation (VE) (respiratory rate × tidal volume [VT]) that will result in adequate alveolar ventilation coupled with supplemental oxygen and a mean airway pressure that will result in adequate arterial oxygenation.


2012 ◽  
Vol 56 (3) ◽  
pp. 112-113
Author(s):  
Vasilios E. Papaioannou ◽  
Ioanna Chouvarda ◽  
Nikos Maglaveras ◽  
Christos Dragoumanis ◽  
Ioannis Pneumatikos

2021 ◽  
Vol 2 (2) ◽  
pp. 53-58
Author(s):  
Marissa Su ◽  
ehab daoud

Background: Adaptive support ventilation (ASV) is an intelligent mode of mechanical ventilation protocol which uses a closed-loop control between breaths. The algorithm states that for a given level of alveolar ventilation, there is a particular respiratory rate and tidal volume which achieve a lower work of breathing. The mode allows the clinician to set a desired minute ventilation percentage (MV%) while the ventilator automatically selects the target ventilatory pattern base on these inputs and feedback from the ventilator monitoring system. The goal is to minimize the work of breathing and reduce complications by allowing the ventilator to adjust the breath delivery taking into account the patient’s respiratory mechanics (Resistance, and Compliance). In this study we examine the effect of patients’ respiratory effort on target tidal volume (VT) and Minute Ventilation (V̇e) during ASV using breathing simulator. Methods: A bench study was performed by using the ASL 5000 breathing simulator to compare the target ventilator to actual VT and V̇e value in simulated patients with various level of respiratory effort during ASV on the Hamilton G5 ventilator. The clinical scenario involves simulated adult male with IBW 70kg and normal lung mechanics: respiratory compliance of 70 mL/cm H2O, and airway resistance of 9 cm H2O/L/s. Simulated patients were subjected to five different level of muscle pressure (Pmus): 0 (Passive), -5, -10, -15, -25 (Active) cm H2O at a set respiratory rate of 10 (below targeted VT) set at three different levels of minute ventilation goals: 100%, 200%, and 300%, with a PEEP of 5 cm H2O. Fifty breaths were analyzed in every experiment. Means and standard deviations (SD) of variables were calculated. One way analysis of variants was done to compare the values. Pearson correlation coefficient test was used to calculate the correlation between the respiratory effort and the VT, V̇e, and peak inspiratory pressure (PIP). Results: The targeted VT and V̇e were not significant in the passive patient when no effort was present, however were significantly higher in the active states at all levels of Pmus on the 100%, 200% and the 300 MV%. The VT and V̇e increase correlated with the muscle effort in the 100 and 200 MV% but did not in the 300%. Conclusions: Higher inspiratory efforts resulted in significantly higher VT and V̇e than targeted ones. Estimating patients’ effort is important during setting ASV. Keywords: Mechanical ventilation, ASV, InteliVent, Pmus, tidal volume, percent minute ventilation


2017 ◽  
Vol 62 (4) ◽  
pp. 334
Author(s):  
K. PAVLIDOU (Κ. ΠΑΥΛΙΔΟΥ) ◽  
I. SAVVAS (Ι. ΣΑΒΒΑΣ) ◽  
T. ANAGNOSTOU (Τ. ΑΝΑΓΝΩΣΤΟΥ)

Mechanical ventilation is the process of supporting respiration by manual or mechanical means. When normal breathing is inefficient or has stopped, mechanical ventilation is life-saving and should be applied at once. The ventilator increases the patient's ventilation by inflating the lungs with oxygen or a mixture of air and oxygen. Ventilators play an important role in the anaesthetic management of patients, as well as in the treatment of patients in the ICU. However, there are differences between the anaesthetic ventilators and the ventilators in ICU. The main indication for mechanical ventilation is difficulty in ventilation and/or oxygenation of the patient because of any respiratory or other disease. The aims of mechanical ventilation are to supply adequate oxygen to patients with a limited vital capacity, to treat ventilatory failure, to reduce dyspnoea and to facilitate rest of fatigued breathing muscles. Depression of the central nervous system function is a pre-requirement for mechanical ventilation. Some times, opioids or muscle relaxants can be used in order to depress patient's breathing. Mechanical ventilation can be applied using many different modes: assisted ventilation, controlled ventilation, continuous positive pressure ventilation, intermittent positive pressure ventilation and jet ventilation. Furthermore, there are different types of automatic ventilators built to provide positive pressure ventilation in anaesthetized or heavily sedated or comatose patients: manual ventilators (Ambu-bag), volumecontrolled ventilators with pressure cycling, volume-controlled ventilators with time cycling and pressure-controlled ventilators. In veterinary practice, the ventilator should be portable, compact and easy to operate. The controls on most anaesthetic ventilators include settings for tidal volume, inspiratory time, inspiratory pressure, respiratory rate and inspiration: expiration (I:E) ratio. The initial settings should be between 10-20 ml/kg for tidal volume, 12-30 cmH2 0 for the inspiratory pressure and 8-15 breaths/min for the respiratory rate. Mechanical ventilation is a very important part of treatment in the ICU, but many problems may arise during application of mechanical ventilation in critically ill patients. All connections should be checked in advance and periodically for mechanical problems like leaks. Moreover, complications like lung injury, pneumonia, pneumothorax, myopathy and respiratory failure can occur during the course of mechanical ventilation causing difficulty in weaning.


Sign in / Sign up

Export Citation Format

Share Document