Mixing in internally stirred flows

2009 ◽  
Vol 465 (2104) ◽  
pp. 1271-1290 ◽  
Author(s):  
P.N Shankar ◽  
R Kidambi
Keyword(s):  
Reynolds Number ◽  
Viscous Fluid ◽  
Three Dimensional ◽  
Analytical Description ◽  
Two Dimensional ◽  
Mixing Properties ◽  
Stokes Approximation ◽  
Dimensional Flow ◽  
Periodic Rotation ◽  
Two Dimensional Flow

We consider mixing in a viscous fluid by the periodic rotation and translation of a stirrer, the Reynolds number being low enough that the Stokes approximation is valid in the unsteady, two-dimensional flow. Portions of the boundary of the container may also move to contribute to the mixing. The shapes of the stirrer and the container are arbitrary. It is shown that the recently developed embedding method for eigenfunction expansions in arbitrary domains is well suited to analyse the mixing properties of such mixers. This application depends crucially on the accurate analytical description of the complex, unsteady field. After carefully validating the proposed method against the recent results found in the literature, examples are given of how the method could be used in practice. A special advantage of the suggested method is that it can be extended to handle three-dimensional mixing flows with virtually no change in the procedure shown here.

Wake behaviour and instability of flow through a partially blocked channel

2007 ◽  
Vol 582 ◽  
pp. 319-340 ◽  
Author(s):  
M. D. GRIFFITH ◽  
M. C. THOMPSON ◽  
T. LEWEKE ◽  
K. HOURIGAN ◽  
W. P. ANDERSON
Keyword(s):  
Reynolds Number ◽  
Three Dimensional ◽  
Underlying Mechanism ◽  
Two Dimensional ◽  
Recirculation Bubble ◽  
Dimensional Flow ◽  
Starting Point ◽  
Two Dimensional Flow ◽  
Flow Through ◽  
The Stability

The two-dimensional flow through a constricted channel is studied. A semi-circular bump is located on one side of the channel and the extent of blockage is varied by adjusting the radius of the bump. The blockage is varied between 0.05 and 0.9 of the channel width and the upstream Reynolds number between 25 and 3000. The geometry presents a simplified blockage specified by a single parameter, serving as a starting point for investigations of other more complex blockage geometries. For blockage ratios in excess of 0.4, the variation of reattachment length with Reynolds number collapses to within approximately 15%, while at lower ratios the behaviour differs. For the constrained two-dimensional flow, various phenomena are identified, such as multiple mini-recirculations contained within the main recirculation bubble and vortex shedding at higher Reynolds numbers. The stability of the flow to three-dimensional perturbations is analysed, revealing a transition to a three-dimensional state at a critical Reynolds number which decreases with higher blockage ratios. Separation lengths and the onset and structure of three-dimensional instability observed from the geometry of blockage ratio 0.5 resemble results taken from backward-facing step investigations. The question of the underlying mechanism behind the instability being either centrifugal or elliptic in nature and operating within the initial recirculation zone is analytically tested.

scholarly journals Self propulsion due to oscillations on the surface of a cylinder at low Reynolds number

1971 ◽  
Vol 5 (2) ◽  
pp. 255-264 ◽  
Author(s):  
J.R. Blake
Keyword(s):  
Reynolds Number ◽  
Viscous Fluid ◽  
Low Reynolds Number ◽  
Infinite Cylinder ◽  
Two Dimensional ◽  
Dimensional Flow ◽  
Two Dimensional Flow ◽  
Low Reynolds ◽  
Micro Organisms

The two-dimensional flow around an infinite cylinder at low Reynolds number has interested fluid dynamicists for many years. In this paper it is shown that an infinite cylinder can propel itself through a viscous fluid (for example micro-organisms) if it has certain undulations on its surface.

Contracting ducts of finite length

1951 ◽  
Vol 2 (4) ◽  
pp. 254-271 ◽  
Author(s):  
L. G. Whitehead ◽  
L. Y. Wu ◽  
M. H. L. Waters
Keyword(s):  
Stream Function ◽  
Finite Length ◽  
Velocity Potential ◽  
Three Dimensional ◽  
Relaxation Method ◽  
Two Dimensional ◽  
Dimensional Flow ◽  
Hodograph Plane ◽  
Two Dimensional Flow ◽  
Working Section

SummmaryA method of design is given for wind tunnel contractions for two-dimensional flow and for flow with axial symmetry. The two-dimensional designs are based on a boundary chosen in the hodograph plane for which the flow is found by the method of images. The three-dimensional method uses the velocity potential and the stream function of the two-dimensional flow as independent variables and the equation for the three-dimensional stream function is solved approximately. The accuracy of the approximate method is checked by comparison with a solution obtained by Southwell's relaxation method.In both the two and the three-dimensional designs the curved wall is of finite length with parallel sections upstream and downstream. The effects of the parallel parts of the channel on the rise of pressure near the wall at the start of the contraction and on the velocity distribution across the working section can therefore be estimated.

Three-dimensional flow in cavities

1963 ◽  
Vol 16 (4) ◽  
pp. 620-632 ◽  
Author(s):  
D. J. Maull ◽  
L. F. East
Keyword(s):  
Static Pressure ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Three Dimensional Flow ◽  
Large Span ◽  
Dimensional Flow ◽  
Pressure Distributions ◽  
Oil Flow ◽  
Two Dimensional Flow

The flow inside rectangular and other cavities in a wall has been investigated at low subsonic velocities using oil flow and surface static-pressure distributions. Evidence has been found of regular three-dimensional flows in cavities with large span-to-chord ratios which would normally be considered to have two-dimensional flow near their centre-lines. The dependence of the steadiness of the flow upon the cavity's span as well as its chord and depth has also been observed.

Cellular flow in a partially filled rotating drum: regular and chaotic advection

2017 ◽  
Vol 825 ◽  
pp. 631-650 ◽  
Author(s):  
Francesco Romanò ◽  
Arash Hajisharifi ◽  
Hendrik C. Kuhlmann
Keyword(s):  
Three Dimensional ◽  
Reynolds Numbers ◽  
Chaotic Advection ◽  
Two Dimensional ◽  
Rotating Drum ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Heteroclinic Connection ◽  
Two Dimensional Flow ◽  
Chaotic Streamlines

The topology of the incompressible steady three-dimensional flow in a partially filled cylindrical rotating drum, infinitely extended along its axis, is investigated numerically for a ratio of pool depth to radius of 0.2. In the limit of vanishing Froude and capillary numbers, the liquid–gas interface remains flat and the two-dimensional flow becomes unstable to steady three-dimensional convection cells. The Lagrangian transport in the cellular flow is organised by periodic spiralling-in and spiralling-out saddle foci, and by saddle limit cycles. Chaotic advection is caused by a breakup of a degenerate heteroclinic connection between the two saddle foci when the flow becomes three-dimensional. On increasing the Reynolds number, chaotic streamlines invade the cells from the cell boundary and from the interior along the broken heteroclinic connection. This trend is made evident by computing the Kolmogorov–Arnold–Moser tori for five supercritical Reynolds numbers.

Theoretical Aspects of Thrust Vector Control by Secondary Gas Injection in Rocket Nozzles

1968 ◽  
Vol 72 (686) ◽  
pp. 171-177 ◽  
Author(s):  
John H. Neilson ◽  
Alastair Gilchrist ◽  
Chee K. Lee
Keyword(s):  
Vector Control ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Three Dimensional Flow ◽  
Side Force ◽  
Thrust Vector Control ◽  
Dimensional Flow ◽  
Two Dimensional Flow ◽  
Thrust Vector ◽  
Secondary Injection

This work deals with theoretical aspects of thrust vector control in rocket nozzles by the injection of secondary gas into the supersonic region of the nozzle. The work is concerned mainly with two-dimensional flow, though some aspects of three-dimensional flow in axisymmetric nozzles are considered. The subject matter is divided into three parts. In Part I, the side force produced when a physical wedge is placed into the exit of a two-dimensional nozzle is considered. In Parts 2 and 3, the physical wedge is replaced by a wedge-shaped “dead water” region produced by the separation of the boundary layer upstream of a secondary injection port. The modifications which then have to be made to the theoretical relationships, given in Part 1, are enumerated. Theoretical relationships for side force, thrust augmentation and magnification parameter for two- and three-dimensional flow are given for secondary injection normal to the main nozzle axis. In addition, the advantages to be gained by secondary injection in an upstream direction are clearly illustrated. The theoretical results are compared with experimental work and a comparison is made with the theories of other workers.

scholarly journals Linear stability of confined flow around a 180-degree sharp bend

2017 ◽  
Vol 822 ◽  
pp. 813-847 ◽  
Author(s):  
Azan M. Sapardi ◽  
Wisam K. Hussam ◽  
Alban Pothérat ◽  
Gregory J. Sheard
Keyword(s):  
Reynolds Number ◽  
Stability Analysis ◽  
Linear Stability ◽  
Linear Stability Analysis ◽  
Critical Reynolds Number ◽  
Three Dimensional ◽  
Base Flow ◽  
Two Dimensional ◽  
Two Dimensional Flow ◽  
The Stability

This study seeks to characterise the breakdown of the steady two-dimensional solution in the flow around a 180-degree sharp bend to infinitesimal three-dimensional disturbances using a linear stability analysis. The stability analysis predicts that three-dimensional transition is via a synchronous instability of the steady flows. A highly accurate global linear stability analysis of the flow was conducted with Reynolds number $\mathit{Re}<1150$ and bend opening ratio (ratio of bend width to inlet height) $0.2\leqslant \unicode[STIX]{x1D6FD}\leqslant 5$. This range of $\mathit{Re}$ and $\unicode[STIX]{x1D6FD}$ captures both steady-state two-dimensional flow solutions and the inception of unsteady two-dimensional flow. For $0.2\leqslant \unicode[STIX]{x1D6FD}\leqslant 1$, the two-dimensional base flow transitions from steady to unsteady at higher Reynolds number as $\unicode[STIX]{x1D6FD}$ increases. The stability analysis shows that at the onset of instability, the base flow becomes three-dimensionally unstable in two different modes, namely a spanwise oscillating mode for $\unicode[STIX]{x1D6FD}=0.2$ and a spanwise synchronous mode for $\unicode[STIX]{x1D6FD}\geqslant 0.3$. The critical Reynolds number and the spanwise wavelength of perturbations increase as $\unicode[STIX]{x1D6FD}$ increases. For $1<\unicode[STIX]{x1D6FD}\leqslant 2$ both the critical Reynolds number for onset of unsteadiness and the spanwise wavelength decrease as $\unicode[STIX]{x1D6FD}$ increases. Finally, for $2<\unicode[STIX]{x1D6FD}\leqslant 5$, the critical Reynolds number and spanwise wavelength remain almost constant. The linear stability analysis also shows that the base flow becomes unstable to different three-dimensional modes depending on the opening ratio. The modes are found to be localised near the reattachment point of the first recirculation bubble.

scholarly journals Volumetric imaging of shark tail hydrodynamics reveals a three-dimensional dual-ring vortex wake structure

2011 ◽  
Vol 278 (1725) ◽  
pp. 3670-3678 ◽  
Author(s):  
Brooke E. Flammang ◽  
George V. Lauder ◽  
Daniel R. Troolin ◽  
Tyson Strand
Keyword(s):  
Three Dimensional ◽  
Flow Patterns ◽  
Wake Flow ◽  
Ring Vortex ◽  
Vortex Wake ◽  
Two Dimensional ◽  
Volumetric Imaging ◽  
Dimensional Flow ◽  
Classic Problem ◽  
Two Dimensional Flow

Understanding how moving organisms generate locomotor forces is fundamental to the analysis of aerodynamic and hydrodynamic flow patterns that are generated during body and appendage oscillation. In the past, this has been accomplished using two-dimensional planar techniques that require reconstruction of three-dimensional flow patterns. We have applied a new, fully three-dimensional, volumetric imaging technique that allows instantaneous capture of wake flow patterns, to a classic problem in functional vertebrate biology: the function of the asymmetrical (heterocercal) tail of swimming sharks to capture the vorticity field within the volume swept by the tail. These data were used to test a previous three-dimensional reconstruction of the shark vortex wake estimated from two-dimensional flow analyses, and show that the volumetric approach reveals a different vortex wake not previously reconstructed from two-dimensional slices. The hydrodynamic wake consists of one set of dual-linked vortex rings produced per half tail beat. In addition, we use a simple passive shark-tail model under robotic control to show that the three-dimensional wake flows of the robotic tail differ from the active tail motion of a live shark, suggesting that active control of kinematics and tail stiffness plays a substantial role in the production of wake vortical patterns.

Sign in / Sign up

Export Citation Format

Share Document