Finite element analysis of a synchronous permanent magnet micromotor through axisymmetric and transverse planar simulations

1998 ◽  
Vol 34 (5) ◽  
pp. 3604-3607
Author(s):  
A.C. Aguero ◽  
F.A. Actis ◽  
V.C. Silva ◽  
J.R. Cardoso ◽  
S.I. Nabeta
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Permanent Magnet ◽  
Element Analysis

scholarly journals Design and Analysis of a Dual Airgap Radial Flux Permanent Magnet Vernier Machine with Yokeless Rotor

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2311
Author(s):  
Mudassir Raza Siddiqi ◽  
Tanveer Yazdan ◽  
Jun-Hyuk Im ◽  
Muhammad Humza ◽  
Jin Hur
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Permanent Magnet ◽  
Flux Linkage ◽  
Element Analysis ◽  
Cogging Torque ◽  
Torque Density ◽  
Stator Windings ◽  
Radial Flux ◽  
Torque Ripples

This paper presents a novel topology of dual airgap radial flux permanent magnet vernier machine (PMVM) in order to obtain a higher torque per magnet volume and similar average torque compared to a conventional PMVM machine. The proposed machine contains two stators and a sandwiched yokeless rotor. The yokeless rotor helps to reduce the magnet volume by providing an effective flux linkage in the stator windings. This effective flux linkage improved the average torque of the proposed machine. The competitiveness of the proposed vernier machine was validated using 2D finite element analysis under the same machine volume as that of conventional vernier machine. Moreover, cogging torque, torque ripples, torque density, losses, and efficiency performances also favored the proposed topology.

scholarly journals Design and Analysis of Dual Mover Multi-Tooth Permanent Magnet Flux Switching Machine for Ropeless Elevator Applications

Actuators ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 81
Author(s):  
Atif Zahid ◽  
Faisal Khan ◽  
Naseer Ahmad ◽  
Irfan Sami ◽  
Wasiq Ullah ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Permanent Magnet ◽  
Iron Core ◽  
Analytical Prediction ◽  
Element Analysis ◽  
Design Structure ◽  
Finite Element Analysis Simulation ◽  
Analysis Package ◽  
Flux Switching Motor

A dual mover yokeless multi-tooth (DMYMT) permanent magnet flux switching motor (PM-FSM) design is presented in this article for ropeless elevator applications. The excitation sources, including a field winding and permanent magnet, are on the short mover in the proposed design structure, whereas the stator is a simple slotted iron core, thus reducing the vertical transportation system cost. The operational principle of the proposed DMYMT in PM-FSM is introduced. The proposed dual mover yokeless multi-tooth Permanent Magnet Flux Switching Motor is analyzed and compared for various performance parameters in a Finite Element Analysis package. The proposed machine has high thrust force and cost-effectiveness compared to conventional dual permanent magnet motor. Finally, this paper also develops an analytical model for the proposed structure, validated by comparing it with Finite Element Analysis simulation results. Results show good agreement between analytical prediction and Finite Element Analysis results.

Finite element analysis of permanent magnet motors

1989 ◽  
Author(s):  
A. Boglietti ◽  
M. Chiampi ◽  
D. Chiarabaglio ◽  
M. Tartaglia
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Permanent Magnet ◽  
Permanent Magnet Motors ◽  
Element Analysis

OPTIMIZATION OF THE FORCE CHARACTERISTIC OF ROTARY MOTION TYPE OF ELECTROMAGNETIC ACTUATOR BASED ON FINITE ELEMENT ANALYSIS

2016 ◽  
Vol 78 (9) ◽  
Author(s):  
Izzati Yusri ◽  
Mariam Md Ghazaly ◽  
Esmail Ali Ali Alandoli ◽  
Mohd Fua'ad Rahmat ◽  
Zulkeflee Abdullah ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Permanent Magnet ◽  
Permanent Magnets ◽  
Thrust Force ◽  
Rotary Motion ◽  
Electromagnetic Actuator ◽  
Element Analysis ◽  
Electromagnetic Actuators ◽  
Motion Type

This paper addresses a rotary motion type of electromagnetic actuator that compares two types of electromagnetic actuators; i.e the Permanent Magnet Switching Flux (PMSF) and the Switching Reluctance (SR) actuator. The Permanent Magnet Switching Flux (PMSF) actuator is the combination of permanent magnets (PM) and the Switching Reluctance (SR) actuator. The force optimizations are accomplished by manipulating the actuator parameters; i.e. (i) the poles ratio of the stator and rotor; (ii) the actuator’s size; (iii) the number of winding turns; and (iv) the air gap thickness between the stator and rotor through Finite Element Analysis Method (FEM) using the ANSYS Maxwell 3D software. The materials implemented in the actuator’s parameters optimizations are readily available materials, especially in Malaysia. The excitation current used in FEM analysis for both actuators was between 0A and 2A with interval of 0.25A. Based on the FEM analyses, the best result was achieved by the Permanent Magnet Switching Flux (PMSF) actuator. The PMSF actuator produced the largest magnetostatic thrust force (4.36kN) once the size is scaled up to 100% with the input current, 2A respectively. The maximum thrust force generated by the Switching Reluctance (SR) actuator was 168.85μN, which is significantly lower in compared to the results of the PMSF actuator. 

Sign in / Sign up

Export Citation Format

Share Document