scholarly journals Optimal Power Flow of Power Systems Including Distributed Generation Units Using Sunflower Optimization Algorithm

IEEE Access ◽  
2019 ◽  
Vol 7 ◽  
pp. 109289-109300 ◽  
Author(s):  
Mohamed A. M. Shaheen ◽  
Hany M. Hasanien ◽  
S. F. Mekhamer ◽  
Hossam E. A. Talaat
Keyword(s):  
Power Systems ◽  
Distributed Generation ◽  
Optimization Algorithm ◽  
Power Flow ◽  
Optimal Power Flow ◽  
Optimal Power

A Probabilistic Multi-Objective Approach for Power Flow Optimization in Hybrid Wind-Based Power Systems Using Grasshopper Optimization Algorithm

2020 ◽  
Vol 11 (4) ◽  
pp. 61-86
Author(s):  
Barun Mandal ◽  
Provas Kumar Roy
Keyword(s):  
Power Systems ◽  
Optimization Algorithm ◽  
Power Flow ◽  
Optimal Power Flow ◽  
Thermal Power ◽  
Optimal Power ◽  
Valve Point Effect ◽  
Grasshopper Optimization Algorithm ◽  
Grasshopper Optimization ◽  
Practical Constraints

This article introduces a grasshopper optimization algorithm (GOA) to efficiently prove its superiority for solving different objectives of optimal power flow (OPF) based on a mixture thermal power plant that incorporates uncertain wind energy (WE) sources. Many practical constraints of generators, valve point effect, multiple fuels, and the various scenarios incorporating several configurations of WEs are considered for both singles along with multi-objectives for the OPF issue. Within the article, the considered method is verified on two common bus experiment systems, i.e. IEEE 30-bus as well as the IEEE 57-bus. Here, the fuel amount minimization and emission minimization are studied as the primary purposes of a GOA-based OPF problem. However, the proposed algorithm yields a reasonable conclusion about the better performance of the wind turbine. Computational results express the effectiveness of the proposed GOA approach for the secure and financially viable of the power system under various uncertainties. The comparison is tabulated with the existing algorithms to provide superior results.

scholarly journals Application of the Multiverse Optimization Method to Solve the Optimal Power Flow Problem in Direct Current Electrical Networks

2021 ◽  
Vol 13 (16) ◽  
pp. 8703
Author(s):  
Andrés Alfonso Rosales-Muñoz ◽  
Luis Fernando Grisales-Noreña ◽  
Jhon Montano ◽  
Oscar Danilo Montoya ◽  
Alberto-Jesus Perea-Moreno
Keyword(s):  
Objective Function ◽  
Successive Approximation ◽  
Direct Current ◽  
Optimization Algorithm ◽  
Power Flow ◽  
Optimal Power Flow ◽  
Flow Problem ◽  
Distributed Generators ◽  
Optimal Power ◽  
Power Flow Problem

This paper addresses the optimal power flow problem in direct current (DC) networks employing a master–slave solution methodology that combines an optimization algorithm based on the multiverse theory (master stage) and the numerical method of successive approximation (slave stage). The master stage proposes power levels to be injected by each distributed generator in the DC network, and the slave stage evaluates the impact of each power configuration (proposed by the master stage) on the objective function and the set of constraints that compose the problem. In this study, the objective function is the reduction of electrical power losses associated with energy transmission. In addition, the constraints are the global power balance, nodal voltage limits, current limits, and a maximum level of penetration of distributed generators. In order to validate the robustness and repeatability of the solution, this study used four other optimization methods that have been reported in the specialized literature to solve the problem addressed here: ant lion optimization, particle swarm optimization, continuous genetic algorithm, and black hole optimization algorithm. All of them employed the method based on successive approximation to solve the load flow problem (slave stage). The 21- and 69-node test systems were used for this purpose, enabling the distributed generators to inject 20%, 40%, and 60% of the power provided by the slack node in a scenario without distributed generation. The results revealed that the multiverse optimizer offers the best solution quality and repeatability in networks of different sizes with several penetration levels of distributed power generation.

scholarly journals Predicting AC Optimal Power Flows: Combining Deep Learning and Lagrangian Dual Methods

2020 ◽  
Vol 34 (01) ◽  
pp. 630-637 ◽  
Author(s):  
Ferdinando Fioretto ◽  
Terrence W.K. Mak ◽  
Pascal Van Hentenryck
Keyword(s):  
Deep Learning ◽  
Power Systems ◽  
Power Flow ◽  
Optimal Power Flow ◽  
Large Scale ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Practical Applications ◽  
Fundamental Building Block ◽  
Optimal Power

The Optimal Power Flow (OPF) problem is a fundamental building block for the optimization of electrical power systems. It is nonlinear and nonconvex and computes the generator setpoints for power and voltage, given a set of load demands. It is often solved repeatedly under various conditions, either in real-time or in large-scale studies. This need is further exacerbated by the increasing stochasticity of power systems due to renewable energy sources in front and behind the meter. To address these challenges, this paper presents a deep learning approach to the OPF. The learning model exploits the information available in the similar states of the system (which is commonly available in practical applications), as well as a dual Lagrangian method to satisfy the physical and engineering constraints present in the OPF. The proposed model is evaluated on a large collection of realistic medium-sized power systems. The experimental results show that its predictions are highly accurate with average errors as low as 0.2%. Additionally, the proposed approach is shown to improve the accuracy of the widely adopted linear DC approximation by at least two orders of magnitude.

scholarly journals SOCP Relaxations of Optimal Power Flow Problem Considering Current Margins in Radial Networks

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 3164 ◽  
Author(s):  
Yuwei Chen ◽  
Ji Xiang ◽  
Yanjun Li
Keyword(s):  
Power Systems ◽  
Power Flow ◽  
Optimal Power Flow ◽  
Additional Term ◽  
Transmission Losses ◽  
Stability Margins ◽  
Optimal Power ◽  
Second Order Cone ◽  
Convex Problem ◽  
Generation Costs

Optimal power flow (OPF) is a non-linear and non-convex problem that seeks the optimization of a power system operation point to minimize the total generation costs or transmission losses. This study proposes an OPF model considering current margins in radial networks. The objective function of this OPF model has an additional term of current margins of the line besides the traditional transmission losses and generations costs, which contributes to thermal stability margins of power systems. The model is a reformulated bus injection model with clear physical meanings. Second order cone program (SOCP) relaxations for the proposed OPF are made, followed by the over-satisfaction condition guaranteeing the exactness of the SOCP relaxations. A simple 6-node case and several IEEE benchmark systems are studied to illustrate the efficiency of the developed results.

Sign in / Sign up

Export Citation Format

Share Document