Development of Design Procedure for Compact Planar Ultra-Wideband (UWB) Bandpass Filters

Author(s):  
Yasushi Horii ◽  
Koki Ishikawa ◽  
Takuya Kaneko ◽  
Yuji Azuma
Electronics ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 209 ◽  
Author(s):  
Min-Hang Weng ◽  
Fu-Zhong Zheng ◽  
Hong-Zheng Lai ◽  
Shih-Kun Liu

In this paper, we develop a bandpass filter using a stub-loaded stepped impedance resonator (SLSIR) and calculate the even and odd resonant modes of this type of resonator using the input impedance/admittance analysis. In this study, two impedance ratios and two length ratios are operated as the design parameters for controlling the resonant modes of the SLSIR. Several resonant mode variation curves operating three resonant modes with different impedance ratios and two length ratios are developed. By tuning the desired impedance ratios and length ratios of the SLSIRs, compact ultra-wideband (UWB) bandpass filters (BPFs) can be achieved. Two examples of the UWB BPFs are designed in this study. The first example is UWB filter with a wide stopband and the second one is dual UWB BPF, namely, with UWB performance and a notch band. The first filter is designed for a UWB response from 3.1 to 5.26 GHz having a stopband from 5.3 to 11 GHz, with an attenuation level better than 18 dB. The second filter example is a dual UWB BPF with the frequency range from 3.1 to 5 GHz and 6 to 10.1 GHz using two sets of the proposed SLSIR. The measured results have insertion loss of less than 1 dB, and return loss greater than 10 dB. Furthermore, the coupling structures and open stub of the SLSIR also provide several transmission zeros at the skirt of the passbands for improving the passband selectivity.


Sign in / Sign up

Export Citation Format

Share Document