A general 6-DOF industrial robot arm control system based on Linux and FPGA

Author(s):  
Cong Han ◽  
Hongbin Ma ◽  
Wenchao Zuo ◽  
Sunjie Chen ◽  
Xinghong Zhang
Author(s):  
Yusuke Wakita ◽  
Noboru Takizawa ◽  
Kentaro Nagata ◽  
Kazushige Magatani

2013 ◽  
Vol 2013 (0) ◽  
pp. _2A2-P17_1-_2A2-P17_3
Author(s):  
Yuuma HIRAMATSU ◽  
Kenshiro NAKATA ◽  
Tsubasa SETO ◽  
Kazusige MAGATANI

2017 ◽  
Vol 2 (3) ◽  
pp. 260-266
Author(s):  
Naufel B. Mhammed ◽  
Soran Ab. M. Saeed ◽  
Avan M. Ahmed

This paper present a novel way of modeling EOG signal to use in a robot arm control system, two procedures implemented, offline procedure to measure and modeling EOG for building  a pattern reference model ,and online procedure used to Control the robot arm. By comparing online measured EOG and the EOG pattern in reference model suitable manipulation instruction generated by the micro controller. The double exponential smoothing method used for building the pattern reference model, the accuracy of the reference model tested with main squire error (MSE) and main absolute error (MAPE) measures. Auto correlation analysis applied to study the existing pattern and linearity of EOG signal with eye movements. EOG signal measurement for this research classified in to five kinds: EOG horizontal (left and right) Vertical (up and down), and blinking. The EOG signal models of this research saved and used as a reference model file to classify the eye movements. a measurement and robot arm control system constructed by using arduino olimix 328, olimix sensor shield, and robot arm driving circuit, arduino C used as a programming environment, Minitab software used to build the model and correlation analysis ,Brain Bay software used to control and signal processing.


IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 15017-15026
Author(s):  
Yeohun Yun ◽  
Seung Joon Lee ◽  
Suk-Ju Kang

2015 ◽  
Vol 742 ◽  
pp. 546-550
Author(s):  
Jin Xia Diao ◽  
Ru Ying Hou ◽  
Hai Dong Hu

This paper studies the joint type palletizing robot arm, using MFC application platform designed a four-axis palletizing robot arm control software. Software in the paper we design has friendly interface, the operator through the input palletizing basic information, and then introduced with the steering gear control and DSP implementation of serial communication programming, and system hardware circuit was designed by palletizing robot arm control system simulation tests were conducted to verify system functions.


Sign in / Sign up

Export Citation Format

Share Document