Development of the Robot Arm Control System Using Forearm SEMG

Author(s):  
Yusuke Wakita ◽  
Noboru Takizawa ◽  
Kentaro Nagata ◽  
Kazushige Magatani
2013 ◽  
Vol 2013 (0) ◽  
pp. _2A2-P17_1-_2A2-P17_3
Author(s):  
Yuuma HIRAMATSU ◽  
Kenshiro NAKATA ◽  
Tsubasa SETO ◽  
Kazusige MAGATANI

2017 ◽  
Vol 2 (3) ◽  
pp. 260-266
Author(s):  
Naufel B. Mhammed ◽  
Soran Ab. M. Saeed ◽  
Avan M. Ahmed

This paper present a novel way of modeling EOG signal to use in a robot arm control system, two procedures implemented, offline procedure to measure and modeling EOG for building  a pattern reference model ,and online procedure used to Control the robot arm. By comparing online measured EOG and the EOG pattern in reference model suitable manipulation instruction generated by the micro controller. The double exponential smoothing method used for building the pattern reference model, the accuracy of the reference model tested with main squire error (MSE) and main absolute error (MAPE) measures. Auto correlation analysis applied to study the existing pattern and linearity of EOG signal with eye movements. EOG signal measurement for this research classified in to five kinds: EOG horizontal (left and right) Vertical (up and down), and blinking. The EOG signal models of this research saved and used as a reference model file to classify the eye movements. a measurement and robot arm control system constructed by using arduino olimix 328, olimix sensor shield, and robot arm driving circuit, arduino C used as a programming environment, Minitab software used to build the model and correlation analysis ,Brain Bay software used to control and signal processing.


IEEE Access ◽  
2020 ◽  
Vol 8 ◽  
pp. 15017-15026
Author(s):  
Yeohun Yun ◽  
Seung Joon Lee ◽  
Suk-Ju Kang

2015 ◽  
Vol 742 ◽  
pp. 546-550
Author(s):  
Jin Xia Diao ◽  
Ru Ying Hou ◽  
Hai Dong Hu

This paper studies the joint type palletizing robot arm, using MFC application platform designed a four-axis palletizing robot arm control software. Software in the paper we design has friendly interface, the operator through the input palletizing basic information, and then introduced with the steering gear control and DSP implementation of serial communication programming, and system hardware circuit was designed by palletizing robot arm control system simulation tests were conducted to verify system functions.


2017 ◽  
Vol 2 (1) ◽  
pp. 58-65
Author(s):  
Ariyono SE

At this time the development and technological advances encourage the people to change the ordinary life style extra ordinary life style, sophisticated, modern, and still give priority to security that become relatively high. Therefore human is required in order to adapt twith the condition that exist at this time. One of them is the development in the robotics world. Because the benefits of robot is very important in helping the human job or replace the role of humans life, either in industry or in other sector that have a control system respectively. Therefore designed a robot arm control system using a communication device that is familiar and almost every people use it. That is a handphone. The working principle of that device a command or input from handphone then transmitted to electronic circuit that used bluetooth media. There is also bluetooth at the circuit that work to continue use data or command from handphone. On microcontroller using IC ATMEGA 16 and the programing language C. From the microcontroller has set the motor DC on robot arm. Which will be driveraccording with instruction that given by that handphone


Sign in / Sign up

Export Citation Format

Share Document