A Modified High Frequency Rectifier with Substrate Voltage Compensation Techniques at 45 nm Technology for RF Energy Harvesting Application

Author(s):  
Manash Pratim Sarma ◽  
Kanadarpa Kumar Sarma ◽  
Nikos E Mastorakis

With the advent of modern wireless communication technology and increasing requirement of high speed network, network life-time is becoming a major area of concern. The need of network power management is gaining attention with the high data network in place and is making a paradigm shift towards green communication. Hence embedding the RF energy harvesting (EH) capability in a wireless network is becoming inevitable. To make RF EH a reality a high frequency rectifier is indeed indispensable along with other circuits in the system. The RF energy needs to be harvested from the available sources in the ambience. It is also seen that the current generation of RF sources radiates at a very low signal power. So, to successfully convert and store this energy, the rectifier must not only be able to provide a sufficiently higher percentage conversion ratio (PCE) but also be able to cater it at a lower range of signal power. This paper presents the design and analysis of a simplified 3-transistor high frequency rectifier. A threshold voltage compensation technique is also incorporated and it achieves a PCE upto 85% at -2dBm in its single stage implementation. This is observed to be one of the highest in-class efficiency as compared to recently reported designs. From the frequency response it is seen to exhibit wide band performance spanning almost all popular wireless bands. The dynamic power dissipation (DPD) is calculated to be 6.25pW at -2dB, whereas the leakage power (LP) is observed to be zero.


2020 ◽  
Vol 11 ◽  
pp. 1-10
Author(s):  
Manash Pratim Sarma ◽  
Kandarpa Kumar Sarma

- The development of latest generation of wireless communication standards in the recent years has created enormous possibility to deploy high speed wireless network throughout the globe. There is always demand for high speed, seamless data connectivity. But it is a well-known fact that the increase in speed always makes the power consumption higher. Also while attempting to cater to the need of connectivity to a remote location, the major bottleneck is the availability of power. Hence incorporating self-sustainability to a wireless network is becoming the need of the hour. Radio frequency (RF) energy harvesting (EH) is gaining much attention in contemporary communications in this context. In the design of an EH system, the high frequency rectifier plays a significant role. Apart from several design hurdles that exist in a high frequency rectifier, to attain a high percentage conversion efficiency (PCE) at lower input power is the primary design challenge. This paper presents a design of a modified transmission gate (TG) based high frequency rectifier with two substrate voltage compensation techniques, viz. capacitor and MOS based compensation for RF EH system.The proposed capacitor and MOS based techniques enable the rectifier to achieve a PCE upto 86% and 92% at -5dBm respectively in its single stage implementation. This can be claimed to be the highest in-class efficiency as compared to recently published works. The frequency responses with both the techniques depict a wide band performance covering all popular wireless bands. The dynamic power dissipations (DPD) observed are 12nW and 16nW at -5dB, whereas the leakage power (LP) is 20x10-51W and zero respectively. Further such an performance are obtained using minimal number of transistors, viz. 4 and 5 respectively.


IEEE Access ◽  
2021 ◽  
pp. 1-1
Author(s):  
Nermeen A. Eltresy ◽  
Abd Elhamid M. Abd Elhamid ◽  
Dalia N. Elsheakh ◽  
Hadia M. Elhennawy ◽  
Esmat A. Abdallah

Sign in / Sign up

Export Citation Format

Share Document