Analysis of DC-link current harmonics for unconventional PWM strategies — Application of the double Fourier integral Method

Author(s):  
Najib Rouhana ◽  
Nicolas Patin ◽  
Guy Friedrich ◽  
Edouard Negre ◽  
Serge Loudot
1965 ◽  
Vol 32 (3) ◽  
pp. 637-642 ◽  
Author(s):  
C. C. Mow

The transient response of a rigid spherical inclusion of arbitrary density embedded in an elastic medium owing to an incident pulse is examined in this paper. The Fourier-integral method is used, and an exact solution of the response is obtained. It is found that the acceleration and velocity of the inclusion are substantially different from those of the medium. A slight difference in the time history of the displacement between the inclusion and the medium is also noted.


1954 ◽  
Vol 21 (2) ◽  
pp. 151-159
Author(s):  
Ning-Gau Wu ◽  
C. W. Nelson

Abstract The Fourier integral method is applied to plane-stress problems of a curved bar bounded by two concentric circles and loaded by concentrated tangential boundary loads. The solutions presented may be combined with results given in previous papers (1, 2) dealing with radial boundary loads so as to obtain the stresses in a curved bar loaded by any combination of concentrated boundary loads inclined at any angle to the radial direction.


The only problem relating to two electrified circular discs, placed parallel to each other, for which an exact solution has been obtained hitherto, is the classical one of Nobili’s rings. This was solved by Riemann,* by an application of the Bessel-Fourier integral method. In this problem the discs are circular electrodes fixed to two infinite conducting planes, which are themselves connected together by the earth or by a wire at infinity. If the axis of z is that of the two co-axial discs, and perpendicular to the infinite plane conducting sheets, the electrical potential V satisfies Laplace’s equation at all points between the plates, and the further conditions (1) ∂V/∂ z = 0, z = ± a , p > p 1 (2) ∂v/∂ z = A/√(r 1 2 —r 2 ), z = ± a , p < p 1 where A is a constant, 2 a is the distance between the plates, bisected by the origin, p 1 is the radius of either disc, and p is the distance of any point from the axis of z . In fact ( z , p ) are the two cylindrical polar co-ordinates on which V can alone depend.


1953 ◽  
Vol 20 (1) ◽  
pp. 82-86
Author(s):  
H. D. Conway

Abstract Using a Fourier integral method, the solution is obtained to an isotropic half plane subjected to a concentrated load acting at some distance from the straight edge. This problem was discussed previously by Melan, using a complex variable method of solution. The Fourier integral method is then extended to solve the corresponding problems of the orthotropic half plane.


1971 ◽  
Vol 38 (4) ◽  
pp. 865-868 ◽  
Author(s):  
T. Mura

The fundamental relations among dislocation density tensors, plastic distortion tensors, and dislocation flux tensors are introduced by the Fourier integral method. The proposed method is analytical rather than geometrical and powerful for further analysis of elastic fields. This method is applied to find displacement and plastic distortion fields for a given distribution of dislocations in anisotropic media. Since these quantities are not state quantities, the unique solution is obtained by designating a history of creation of the dislocations. In this paper the history is given in terms of the direction of motion in which the dislocations are introduced in the material from infinity with infinitely small uniform velocity.


Sign in / Sign up

Export Citation Format

Share Document