Remote sensing of structure constant profiles using Tikhonov’s regularized Fourier integral method: erratum

1984 ◽  
Vol 23 (21) ◽  
pp. 3740_1
Author(s):  
John M. Jarem
1965 ◽  
Vol 32 (3) ◽  
pp. 637-642 ◽  
Author(s):  
C. C. Mow

The transient response of a rigid spherical inclusion of arbitrary density embedded in an elastic medium owing to an incident pulse is examined in this paper. The Fourier-integral method is used, and an exact solution of the response is obtained. It is found that the acceleration and velocity of the inclusion are substantially different from those of the medium. A slight difference in the time history of the displacement between the inclusion and the medium is also noted.


Sensors ◽  
2022 ◽  
Vol 22 (1) ◽  
pp. 320
Author(s):  
Lu Li ◽  
Fengli Zhang ◽  
Yun Shao ◽  
Qiufang Wei ◽  
Qiqi Huang ◽  
...  

To verify the performance of the high-resolution fully polarimetric synthetic aperture radar (SAR) sensor carried by the Xinzhou 60 remote-sensing aircraft, we used corner reflectors to calibrate the acquired data. The target mechanism in high-resolution SAR images is more complex than it is in low-resolution SAR images, the impact of the point target pointing error on the calibration results is more obvious, and the target echo signal of high-resolution images is more easily affected by speckle noise; thus, more accurate extraction of the point target position and the response energy is required. To solve this problem, this paper introduces image context information and proposes a method to precisely determine the integration region of the corner reflector using sliding windows based on the integral method. The validation indicates that the fully polarimetric SAR sensor on the Xinzhou 60 remote-sensing aircraft can accurately reflect the radiometric characteristics of the ground features and that the integral method can obtain more stable results than the peak method. The sliding window allows the position of the point target to be determined more accurately, and the response energy extracted from the image via the integral method is closer to the theoretical value, which means that the high-resolution SAR system can achieve a higher radiometric calibration accuracy. Additionally, cross-validation reveals that the airborne SAR images have similar quality levels to Sentinel-1A and Gaofen-3 images.


1954 ◽  
Vol 21 (2) ◽  
pp. 151-159
Author(s):  
Ning-Gau Wu ◽  
C. W. Nelson

Abstract The Fourier integral method is applied to plane-stress problems of a curved bar bounded by two concentric circles and loaded by concentrated tangential boundary loads. The solutions presented may be combined with results given in previous papers (1, 2) dealing with radial boundary loads so as to obtain the stresses in a curved bar loaded by any combination of concentrated boundary loads inclined at any angle to the radial direction.


The only problem relating to two electrified circular discs, placed parallel to each other, for which an exact solution has been obtained hitherto, is the classical one of Nobili’s rings. This was solved by Riemann,* by an application of the Bessel-Fourier integral method. In this problem the discs are circular electrodes fixed to two infinite conducting planes, which are themselves connected together by the earth or by a wire at infinity. If the axis of z is that of the two co-axial discs, and perpendicular to the infinite plane conducting sheets, the electrical potential V satisfies Laplace’s equation at all points between the plates, and the further conditions (1) ∂V/∂ z = 0, z = ± a , p > p 1 (2) ∂v/∂ z = A/√(r 1 2 —r 2 ), z = ± a , p < p 1 where A is a constant, 2 a is the distance between the plates, bisected by the origin, p 1 is the radius of either disc, and p is the distance of any point from the axis of z . In fact ( z , p ) are the two cylindrical polar co-ordinates on which V can alone depend.


1953 ◽  
Vol 20 (1) ◽  
pp. 82-86
Author(s):  
H. D. Conway

Abstract Using a Fourier integral method, the solution is obtained to an isotropic half plane subjected to a concentrated load acting at some distance from the straight edge. This problem was discussed previously by Melan, using a complex variable method of solution. The Fourier integral method is then extended to solve the corresponding problems of the orthotropic half plane.


Sign in / Sign up

Export Citation Format

Share Document