Reconstruction Algorithm of Electromagnetic Field in Case of Elliptic Polarization of Near-Field Probe

Author(s):  
Nikolay Anyutin ◽  
Ivan Malay ◽  
Alexey Malyshev
Nanophotonics ◽  
2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Ruslan Röhrich ◽  
A. Femius Koenderink

AbstractStructured illumination microscopy (SIM) is a well-established fluorescence imaging technique, which can increase spatial resolution by up to a factor of two. This article reports on a new way to extend the capabilities of structured illumination microscopy, by combining ideas from the fields of illumination engineering and nanophotonics. In this technique, plasmonic arrays of hexagonal symmetry are illuminated by two obliquely incident beams originating from a single laser. The resulting interference between the light grating and plasmonic grating creates a wide range of spatial frequencies above the microscope passband, while still preserving the spatial frequencies of regular SIM. To systematically investigate this technique and to contrast it with regular SIM and localized plasmon SIM, we implement a rigorous simulation procedure, which simulates the near-field illumination of the plasmonic grating and uses it in the subsequent forward imaging model. The inverse problem, of obtaining a super-resolution (SR) image from multiple low-resolution images, is solved using a numerical reconstruction algorithm while the obtained resolution is quantitatively assessed. The results point at the possibility of resolution enhancements beyond regular SIM, which rapidly vanishes with the height above the grating. In an initial experimental realization, the existence of the expected spatial frequencies is shown and the performance of compatible reconstruction approaches is compared. Finally, we discuss the obstacles of experimental implementations that would need to be overcome for artifact-free SR imaging.


2002 ◽  
Vol 66 (11) ◽  
Author(s):  
V. Zhuk ◽  
D.V. Regelman ◽  
D. Gershoni ◽  
M. Bayer ◽  
J.P. Reithmaier ◽  
...  

2018 ◽  
pp. 97-102
Author(s):  
Валерий Константинович Волосюк ◽  
Семён Сергеевич Жила ◽  
Глеб Сергеевич Черепнин ◽  
Эдуард Алексеевич Цернэ

The generalized structure of the electromagnetic field in the registration area is considered in the case of the solution of problems of remote sensing of the underlying surfaces. Examples of the existing radar and optical coherent devices are given. Analytical expressions for the electromagnetic field in the reception area when sounding is carried out in a near-field Fresnel region, in the assumption that the size of the field of registration and radiation is considerably less than a distance between them, are concretized. It is shown the main operations that are necessary for the recovery of coherent images in a near-field Fresnel region by the methods of multichannel signal processing. Research shows that as the amplitude-phase distribution of the registration field is necessary to choose the classical basic function of Fresnel transformation with the reversed sign in the exponent power. Formally, in an infinite range, the Fresnel transform is invertible, i.e. in the ideal case, the function can be completely restored. However physically to Fresnel's region satisfies area with finite sizes. From the analysis of the obtained operations over the received field, it follows that the radar or optical system forms an estimate of the coherent image in the form of a convolution of a true image of the underlying surface with an ambiguity function. Generally, this function contains two multipliers, one of which determines the resolution of recovery of the coherent image. In that specific case, when the linear sizes of the field of registration go to infinity, ambiguity function takes a form of delta function and the required image can be restored without distortions. It is offered to determine resolution by the width between first zeros of ambiguity function. For rectangular area ambiguity function has the form of two sinc functions which width is directly proportional to wavelength, to the height of sounding and is inversely proportional to the linear sizes of receiving area on the corresponding coordinates. Finally, it is mentioned that for the higher-quality coherent imaging with good resolution by the same receiving area it is necessary to perform scanning and movement in space


2009 ◽  
Vol 1 (6) ◽  
pp. 475-482 ◽  
Author(s):  
Ali Alaeddine ◽  
Moncef Kadi ◽  
Kaouther Daoud ◽  
Hichame Maanane ◽  
Philippe Eudeline

This paper deals with the various aspects of electromagnetic field impact modeling on the SiGe heterojunction bipolar transistor (HBT) device for microwave applications. This study differs from conventional HBT device reliability research associated with other stresses. The originality of this study comes from the generation of a localized electromagnetic field using the near-field bench. A coupling phenomenon between the electromagnetic field and the micro-strip lines connecting the transistor are evaluated by electromagnetic and electrical simulations. After stress, the input and the transmission scattering parameters are affected. This is primarily due to the deviation of the input impedance and the reduction of the transconductance, respectively. The stress effects have been related to a base current degradation. This degradation is due to a hot carrier introducing generation/recombination trap centers at the Si/SiO2 interface of the emitter–base spacer oxide, which leads to an excess recombination base current.


ACTA IMEKO ◽  
2015 ◽  
Vol 4 (1) ◽  
pp. 90 ◽  
Author(s):  
Domenico Giordano ◽  
Luca Zilberti ◽  
Michele Borsero ◽  
Roberto Forastiere ◽  
Wencui Wang

This paper describes the arrangement of a first experimental set-up which allows the comparison between the measurement of the electromagnetic field quantities induced inside a simple cylindrical phantom and the same quantities estimated numerically through a boundary element method. The reliability of the numerical method has been tested at 64 MHz, the Larmor frequency associated to the magnetic resonance imaging devices with an isocenter magnetic field of 1.5 T. To assess its robustness, the comparison is also performed by introducing, inside the phantom, a metallic non magnetic element, which roughly simulates a medical implant.


Sign in / Sign up

Export Citation Format

Share Document