An Intelligent Road Traffic Information System using Text Analysis in the Most Congested Roads in Metro Manila

Author(s):  
Erika Ritzelle P. Bondoc ◽  
Francis Percival M. Caparas ◽  
John Eddie D. Macias ◽  
Vileser T. Naculangga ◽  
Jheanel E. Estrada
Author(s):  
H. Shankar ◽  
M. Sharma ◽  
K. Oberai ◽  
S. Saran

<p><strong>Abstract.</strong> Rapid increase in road traffic density results into a serious problem of Traffic Congestion (TC) in cities. During peaks hours TC is very high and hence public search least congested path for their journeys in order to minimize ravel time and hence transportation cost. In this study, a new empirical model was developed to estimate congestion levels using real time road Traffic Parameters (TPs) such as vehicle density, speed, class and vehicle-to-vehicle (V2V) gap. These real time road TPs were collected using latest generation Inductive Loop Detector (ILD) technology. Further, a WebGIS based Road Traffic Information System (RTIS) for Dehradun city was developed for real time TD analyses and visualisation. This RTIS is very useful for public and user departments for planning and decision making processes. No other such system is available in India, which handles multiple traffic parameters simultaneously to provide solution of day-to-day problems.</p>


Author(s):  
Abir Muhammad Shahriar ◽  
Priyanka Ghosh ◽  
Md. Mehadi Hassan ◽  
Md Khaled Hasan ◽  
Md. Shamim Ahsan

Author(s):  
Yang Xu ◽  
Zhang Zhenjiang ◽  
Liu Yun

2013 ◽  
Vol 12 (3) ◽  
Author(s):  
Rusmadi Suyuti

Traffic information condition is a very useful  information for road user because road user can choose his best route for each trip from his origin to his destination. The final goal for this research is to develop real time traffic information system for road user using real time traffic volume. Main input for developing real time traffic information system is an origin-destination (O-D) matrix to represent the travel pattern. However, O-D matrices obtained through a large scale survey such as home or road side interviews, tend to be costly, labour intensive and time disruptive to trip makers. Therefore, the alternative of using traffic counts to estimate O-D matrices is particularly attractive. Models of transport demand have been used for many years to synthesize O-D matrices in study areas. A typical example of the approach is the gravity model; its functional form, plus the appropriate values for the parameters involved, is employed to produce acceptable matrices representing trip making behaviour for many trip purposes and time periods. The work reported in this paper has combined the advantages of acceptable travel demand models with the low cost and availability of traffic counts. Two types of demand models have been used: gravity (GR) and gravity-opportunity (GO) models. Four estimation methods have been analysed and tested to calibrate the transport demand models from traffic counts, namely: Non-Linear-Least-Squares (NLLS), Maximum-Likelihood (ML), Maximum-Entropy (ME) and Bayes-Inference (BI). The Bandung’s Urban Traffic Movement survey has been used to test the developed method. Based on several statistical tests, the estimation methods are found to perform satisfactorily since each calibrated model reproduced the observed matrix fairly closely. The tests were carried out using two assignment techniques, all-or-nothing and equilibrium assignment.  


Author(s):  
Zhenghong Peng ◽  
Guikai Bai ◽  
Hao Wu ◽  
Lingbo Liu ◽  
Yang Yu

Obtaining the time and space features of the travel of urban residents can facilitate urban traffic optimization and urban planning. As traditional methods often have limited sample coverage and lack timeliness, the application of big data such as mobile phone data in urban studies makes it possible to rapidly acquire the features of residents’ travel. However, few studies have attempted to use them to recognize the travel modes of residents. Based on mobile phone call detail records and the Web MapAPI, the present study proposes a method to recognize the travel mode of urban residents. The main processes include: (a) using DBSCAN clustering to analyze each user’s important location points and identify their main travel trajectories; (b) using an online map API to analyze user’s means of travel; (c) comparing the two to recognize the travel mode of residents. Applying this method in a GIS platform can further help obtain the traffic flow of various means, such as walking, driving, and public transit, on different roads during peak hours on weekdays. Results are cross-checked with other data sources and are proven effective. Besides recognizing travel modes of residents, the proposed method can also be applied for studies such as travel costs, housing–job balance, and road traffic pressure. The study acquires about 6 million residents’ travel modes, working place and residence information, and analyzes the means of travel and traffic flow in the commuting of 3 million residents using the proposed method. The findings not only provide new ideas for the collection and application of urban traffic information, but also provide data support for urban planning and traffic management.


ICTIS 2011 ◽  
2011 ◽  
Author(s):  
Daxin Tian ◽  
Yunpeng Wang ◽  
Guangquan Lu ◽  
Guizhen Yu ◽  
He Liu

Sign in / Sign up

Export Citation Format

Share Document