Control system design of a novel minimally invasive surgery robot

Author(s):  
Ke Liang ◽  
Jianmin Li ◽  
Kang Kong ◽  
Yuanqian Gao ◽  
Dongchun Liu
Author(s):  
Weibang Bai ◽  
Qixin Cao ◽  
Pengfei Wang ◽  
Peng Chen ◽  
Chuntao Leng ◽  
...  

Purpose Robotic systems for laparoscopic minimally invasive surgery (MIS) always end up with highly sophisticated mechanisms and control schemes – making it a long and hard development process with a steep price. This paper aims to propose and realize a new, efficient and convenient strategy for building effective control systems for surgical and even other complex robotic systems. Design/methodology/approach A novel method that takes advantage of the modularization concept by integrating two middleware technologies (robot operating system and robotic technology middleware) into a common architecture based on the strengths of both was designed and developed. Findings Tests of the developed control system showed very low time-delay between the master and slave sides; good movement representation on the slave manipulator; and high positional and operational accuracy. Moreover, the new development strategy trial came with much higher efficiency and lower costs. Research limitations/implications This method results in a modularized and distributed control system that is amenable to collaboratively develop; convenient to modify and update; componentized and easy to extend; mutually independent among subsystems; and practicable to be running and communicating across multiple operating systems. However, experiments show that surgical training and updates of the robotic system are still required to achieve better proficiency for completing complex minimally invasive surgical operations with the proposed and developed system. Originality/value This research proposed and developed a novel modularization design method and a novel architecture for building a distributed teleoperation control system for laparoscopic MIS.


2006 ◽  
Vol 40 (6) ◽  
pp. 471-478 ◽  
Author(s):  
K. D. Wang ◽  
G. Z. Yan

Abstract Miniature robotics for colonoscopy has become a hot research topic with the development of minimally invasive surgery (MIS). In this paper, a novel microrobot for colonoscopy that operates based on a simulation of the squirming motion of the earthworm is described. The robot uses a unique driving unit called a linear electromagnetic driver. The prototype measures 9.5 mm in diameter and 120 mm in length. It is driven by a linear direct current (DC) motor designed and manufactured by the authors. This paper describes the prototype, locomotion principle, and control system in detail. It then describes two models that were built to study the robot's ability to move in the viscoelastic colon environment. A slope model of motion was developed and some mathematical evaluations of locomotion conditions were conducted. Experiments to test the creeping ability of the prototype on a slope were performed to verify these expressions. From the viscoelastic model relative to acting force between the robot and the colon, a transcendent equation about locomotive efficiency of the critical squirm step was deduced and solved to instruct the design of the robot. Last, in vitro experiments in the fresh colon of a pig were performed. The results show that this kind of microrobot can propel itself freely and reliably in the soft viscoelastic colon. Finally, future areas of research are noted.


2004 ◽  
Vol 171 (4S) ◽  
pp. 448-448
Author(s):  
Farjaad M. Siddiq ◽  
Patrick Villicana ◽  
Raymond J. Leveillee

Sign in / Sign up

Export Citation Format

Share Document