Development of a low cost vertical axis wind turbine to study the prospect of wind power in Dhaka, Bangladesh

2014 ◽  
Author(s):  
Sourav Saha ◽  
Sanjid Chowdhury ◽  
Md. Nahid Hasan ◽  
Md. Nabayet Zilani ◽  
Intekhab Alam
Keyword(s):  
Wind Turbine ◽  
Wind Power ◽  
Low Cost ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbine

Design and Performance Prediction of Low Cost Vertical Axis Wind Turbine

2015 ◽  
Vol 813-814 ◽  
pp. 1070-1074
Author(s):  
T. Micha Premkumar ◽  
T. Mohan ◽  
Sivamani Seralathan ◽  
A. Sudheer Kumar
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Power ◽  
Energy Demand ◽  
Low Cost ◽  
Turbine Blades ◽  
Three Dimensional ◽  
Vertical Axis ◽  
Load Factor ◽  
Vertical Axis Wind Turbine

The capacity of wind power generation has increased across India due to various activities encouraged by government. Moreover, onshore potential in India is in the order of 100GW. However, the plant load factor is often very low in wind power production. In most of the place, low-rated wind speed is available. Effective utilization of the wind to produce small power will reduces the grid load. There is in need to effectively utilize the available potential to meet the energy demand. The low cost vertical axis wind turbine designed for low rated wind regime has the hybrid of simple Savonius and helical Savonius. Various experimental parameters are measured to check the suitability of the vertical axis wind turbine in the low rated wind speed regions. Numerical simulation are carried out for three dimensional steady flow around the combined Savonius and helical Savonius vertical axis wind turbine blades using ANSYS Fluent(C). Numerical investigation are conducted to study the effect of hybrid combination on performance of the rotor in terms of coefficient of torque, coefficient of power, etc. Self-starting behaviour of the vertical axis wind turbine is improved by using this hybrid vertical axis wind turbine.

scholarly journals Design of Vertical Axis Wind Turbine Darrieus Type (H- Darrieus Rotor) of 0.20 KW from the Software Topsolid

2020 ◽  
pp. 52-70
Author(s):  
Hagninou E. V. Donnou ◽  
Drissa Boro ◽  
Donald Abode ◽  
Brunel Capo-Chichi ◽  
Aristide B. Akpo
Keyword(s):  
Wind Turbine ◽  
Permanent Magnets ◽  
Aerodynamic Force ◽  
Low Cost ◽  
Coastal Region ◽  
Vertical Axis ◽  
Digital Design ◽  
Three Dimensions ◽  
Geometrical Shape ◽  
Vertical Axis Wind Turbine

The design of a vertical axis wind turbine (Darrieus type) adapted to the site of Cotonou in the coastal region of Benin was investigated. The statistical study of winds based on the Weibull distribution was carried out on hourly wind data measured at 10 m above the ground by the Agency for the Safety of Air Navigation in Africa and Madagascar (ASECNA) over the period from January 1981 to December 2014. The geometrical and functional parameters of the wind turbine were determined from different models and aerodynamic approaches. The digital design and assembly of the wind turbine components were carried out using the TOPSOLID software. The designed wind turbine has a power of 200W. It is equipped with a synchronous generator with permanent magnets and has three wooden blades with NACA 0015 profile. The optimal coefficient of lift and drag were estimated respectively at 0.7832 and 0.01578. The blades are characterized by an optimum angle of attack estimated at 6.25° with a maximum fineness of 49.63. Their length is 4 m and the maximum thickness is estimated at 0.03 m with a chord of 0.20 m. The volume and mass are respectively equal to 0.024 m3 and 36 kg. The aerodynamic stall occurs at an attack angle of 14.25°. The aerodynamic force exerted on these blades is estimated to be 240 N. The aerodynamic stresses exerted on the rotor are estimated at 15 864 504 Pa and the solidity at 0.27. The efficiency of the wind turbine is 0.323. From TOPSOLID, the geometrical shape of each component of the wind turbine is represented in three dimensions. The assembly allowed to visualizing the wind turbine after export via its graphical interface. The quantity of annual energy produced by the wind turbine was estimated at 0.85 MWh. This study is the first to be carried out in the study area and could reduce the technological dependence of vertical axis wind turbines and their import for low cost energy production.

scholarly journals Design and Contruction of Vertical Axis Wind Turbine Triple-Stage Savonius Type as the Alternative Wind Power Plant

KnE Energy ◽  
2015 ◽  
Vol 2 (2) ◽  
pp. 172
Author(s):  
Tedy Harsanto ◽  
Haryo Dwi Prananto ◽  
Esmar Budi ◽  
Hadi Nasbey
Keyword(s):  
Wind Speed ◽  
Power Plant ◽  
Wind Turbine ◽  
Wind Power ◽  
Output Power ◽  
Vertical Axis ◽  
Wind Power Plant ◽  
Vertical Axis Wind Turbine ◽  
Low Wind Speed ◽  
Simple Materials

<p>A vertical axis wind turbine triple-stage savonius type has been created by using simple materials to generate electricity for the alternative wind power plant. The objective of this research is to design a simple wind turbine which can operate with low wind speed. The turbine was designed by making three savonius rotors and then varied the structure of angle on the three rotors, 0˚, 90˚ and 120˚. The dimension of the three rotors are created equal with each rotor diameter 35 cm and each rotor height 19 cm. The turbine was tested by using blower as the wind sources. Through the measurements obtained the comparisons of output power, rotation of turbine, and the level of efficiency generated by the three variations. The result showed that the turbine with angle of 120˚ operate most optimally because it is able to produce the highest output power and highest rotation of turbine which is 0.346 Watt and 222.7 RPM. </p><p><strong>Keywords</strong>: Output power; savonius turbine; triple-stage; the structure of angle</p>

scholarly journals An experimental study of the optimal design parameters of a wind power tower used to improve the performance of vertical axis wind turbines

2018 ◽  
Vol 10 (9) ◽  
pp. 168781401879954
Author(s):  
Soo-Yong Cho ◽  
Sang-Kyu Choi ◽  
Jin-Gyun Kim ◽  
Chong-Hyun Cho
Keyword(s):  
Experimental Study ◽  
Optimal Design ◽  
Wind Turbine ◽  
Wind Power ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Design Parameters ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines

In order to augment the performance of vertical axis wind turbines, wind power towers have been used because they increase the frontal area. Typically, the wind power tower is installed as a circular column around a vertical axis wind turbine because the vertical axis wind turbine should be operated in an omnidirectional wind. As a result, the performance of the vertical axis wind turbine depends on the design parameters of the wind power tower. An experimental study was conducted in a wind tunnel to investigate the optimal design parameters of the wind power tower. Three different sizes of guide walls were applied to test with various wind power tower design parameters. The tested vertical axis wind turbine consisted of three blades of the NACA0018 profile and its solidity was 0.5. In order to simulate the operation in omnidirectional winds, the wind power tower was fabricated to be rotated. The performance of the vertical axis wind turbine was severely varied depending on the azimuthal location of the wind power tower. Comparison of the performance of the vertical axis wind turbine was performed based on the power coefficient obtained by averaging for the one periodic azimuth angle. The optimal design parameters were estimated using the results obtained under equal experimental conditions. When the non-dimensional inner gap was 0.3, the performance of the vertical axis wind turbine was better than any other gaps.

Airborne Wind Power Generation Using a Straight Wing Vertical Axis Wind Turbine

2019 ◽  
Vol 2019.25 (0) ◽  
pp. 18E16
Author(s):  
Hiroshi OKUBO ◽  
Ryo HATAKEYAMA ◽  
Hidemi ONODERA ◽  
Tsuyoshi SATO ◽  
Hironori FUJII ◽  
...  
Keyword(s):  
Power Generation ◽  
Wind Turbine ◽  
Wind Power ◽  
Vertical Axis ◽  
Wind Power Generation ◽  
Vertical Axis Wind Turbine ◽  
Straight Wing

The Straight-Bladed Morphing Vertical Axis Wind Turbine

2016 ◽  
Author(s):  
David MacPhee ◽  
Asfaw Beyene
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Low Cost ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Pitch Control ◽  
Control Schemes ◽  
Horizontal Axis Wind Turbines ◽  
Novel Concept

Blade pitch control has been extremely important for the development of Horizontal-Axis Wind Turbines (HAWTs), allowing for greater efficiency over a wider range of operational regimes when compared to rigid-bladed designs. For Vertical-Axis Wind Turbines (VAWTs), blade pitching is inherently more difficult due to a dependence of attack angle on turbine armature location, shaft speed, and wind speed. As a result, there have been very few practical pitch control schemes put forward for VAWTs, which may be a major reason why this wind turbine type enjoys a much lower market share as compared to HAWTs. To alleviate this issue, the flexible, straight-bladed vertical-axis turbine is presented, which can passively adapt its geometry to local aerodynamic loadings and serves as a low-cost blade pitch control strategy increasing efficiency and startup capabilities. Using two-dimensional fluid-structure action simulations, this novel concept is compared to an identical rigid one and is proven to be superior in terms of power coefficient due to decreased torque minima. Moreover, due to the flexible nature of the blades, the morphing turbine achieves less severe oscillatory loadings. As a result, the morphing blade design is expected to not only increase efficiency but also system longevity without additional system costs usually associated with active pitch control schemes.

Sign in / Sign up

Export Citation Format

Share Document