Research on active power filter for distributed power system of high speed generator driven by micro-turbine

2005 ◽  
Author(s):  
Zong Ming ◽  
Wang Fengxiang ◽  
Wang Zheng ◽  
Zhang Fengge
Keyword(s):  
Power System ◽  
High Speed ◽  
Active Power Filter ◽  
Active Power ◽  
Distributed Power ◽  
Power Filter ◽  
Distributed Power System ◽  
Micro Turbine

An Active Power Filter Controller Based on Dual-DSPs in Low-Voltage Power System

2013 ◽  
Vol 291-294 ◽  
pp. 2302-2307
Author(s):  
Wan Feng Zou ◽  
Lei Zhang
Keyword(s):  
Power System ◽  
High Speed ◽  
Low Voltage ◽  
Active Power Filter ◽  
Active Power ◽  
Harmonic Current ◽  
Nonlinear Load ◽  
Power Filter ◽  
And Control

To compensate harmonics from nonlinear load, the controller of Active Power Filter (APF) need to detect harmonic and generate compensation current in high speed. APF controller functions are divided into two parts: outside controller part and inside controller part. Inside controller part detect harmonic current and control the IGBT to generate grid harmonics current. Outside controller part detect common power parameters and generate signal of management in main circuit. An experiment circuit of APF Controller is established. Some experiments are presented here.

Review of Control Methods for Active Power Filters

2013 ◽  
Vol 811 ◽  
pp. 657-660 ◽  
Author(s):  
You Jie Ma ◽  
Hong De Yuan ◽  
Xue Song Zhou
Keyword(s):  
Power System ◽  
Control Strategies ◽  
Active Power Filter ◽  
Active Power ◽  
Power Electronic ◽  
Active Power Filters ◽  
Power Filter ◽  
Power Filters ◽  
Reactive Current ◽  
Contrast Analysis

With the wide application of power electronic equipments in power system, more and more harmonic are poured into the power system, which cause power pollution and make the power quality problem increasingly serious. Active power filter (APF) is an important equipment to compensate harmonic and reactive current in power system. One of the key technologies lies in the real-time and accurate control. The fundamental principles of several control strategies of compensate current were presented, and the respective merit and demerit of these control strategies were pointed out with contrast analysis in this paper. Active power filter will achieve a higher performance and a wider application with the continuous development of the control strategy.

Adaptive Method for Power Quality Improvement through Minimization of Harmonics Using Artificial Intelligence

2017 ◽  
Vol 8 (1) ◽  
pp. 470 ◽  
Author(s):  
P. Thirumoorthi ◽  
Raheni T D
Keyword(s):  
Artificial Intelligence ◽  
Power System ◽  
Power Quality ◽  
Active Power Filter ◽  
Pi Controller ◽  
Active Power ◽  
Shunt Active Power Filter ◽  
Power Filter ◽  
Non Linear ◽  
Source Current

Power system harmonics are a menace to electric power system with disastrous consequence. Due to the presence of non linear load, power quality of the system gets affected.  To overcome this, shunt active power filter have been used near harmonic producing loads or at the point of common coupling to block current harmonics. The shunt active power filter is designed to minimize harmonics in source current and reactive power in the non linear power supplies which are creating harmonics. In this paper, Instantaneous power of p-q theory is employed to generate the reference currents and PI controller is used to control the dc link voltage. In addition to this, Artificial Intelligence (AI) technique is used to minimize the harmonics produced by nonlinear load. The main objective of this paper is to analyze and compare THD of the source current with PI controller and by artificial neural network based back propagation algorithm. The proposed system is designed with MATLAB/SIMULINK environment.

Sign in / Sign up

Export Citation Format

Share Document