Real time quantitative elastography using Supersonic Shear wave Imaging

Author(s):  
Mickael Tanter ◽  
Mathieu Pernot ◽  
Gabriel Montaldo ◽  
Jean-Luc Gennisson ◽  
Eric Bavu ◽  
...  
2021 ◽  
Vol 22 (Supplement_1) ◽  
Author(s):  
O Pedreira ◽  
C Papadacci ◽  
S Chatelin ◽  
M Correia ◽  
M Tanter ◽  
...  

Abstract Funding Acknowledgements Type of funding sources: Public grant(s) – EU funding. Main funding source(s): ERC Introduction Myocardial stiffness (MS) is crucial to understand cardiac biomechanics and evaluate cardiac function. We recently demonstrated that shear wave imaging using acoustic radiation force can provide quantitative end-diastolic MS in human patients [1] . However, the dependence of shear wave velocity with myofiber orientation remained a limitation and required to perform Shear Wave Velocity (SWV) estimations from different probe orientations which is challenging in clinical practice. We propose a new approach to provide real-time quantitative assessment of MS without dependence of the probe orientation based on a dedicated smart ultrasound (US) device. Methods A new US probe was designed and manufactured to generate acoustic radiation force along the central axis and track the SWV simultaneously along three different orientations to obtain an elliptic profile of SWS. The probe was connected to dedicated electronics and software to provide real-time end-diastolic MS with ECG gating. Validation was performed on 4 in-vitro calibrated phantoms (0.92 – 1.49 – 2.58 – 3.49 m/s) and on ex vivo porcine hearts. MS along and across the fibers were compared to the values measured by conventional shear wave imaging with a linear probe mounted on a rotation motor (angular step of 10°) (Aixplorer, Supersonic imaging). Finally, the in vivo feasibility and reproducibility of measuring MS of the antero-septal wall and of the right ventricular (RV) wall was assessed transthoracically on four human volunteer . Results In vitro results on phantoms showed a good agreement with calibrated value (r2 = 0.98, std = 4.8%). Elliptic profiles on ex-vivo porcine heart showed good agreement with Aixplorer measurements acquired at different angles, with a relative difference along the long axis (LA) of: Δ=7.0%, Δ=7.1%, Δ=9% respectively for left ventricle (LV), right ventricle (RV) and septum. Finally, myocardial SWV assessment in human volunteers was obtained successfully on the RV and on the septum in late diastole. The mean MS was 1.79+/- 0.15 m/s along the fiber direction, the  fractional anisotropy (FA) was 0.25 +/- 0.06 on septal wall  in good agreement with previous results [1] and 1.06 +/- 0.11 m/s along fibers orientation and a FA of 0.27 +/- 0.08 on RV.  Finally the beat to beat reproducibility of MS measurement was estimated to be 8.22%. Conclusion The new smart US device allowed non-invasive quantification of anisotropic myocardial tissues in real time. Results showed the accuracy of the methods. This approach could offer a new clinical tool for the evaluation of the myocardium in cardiomyopathies and in heart failure patients. Abstract Figure. SWV on myocardium human volonteer


2011 ◽  
Vol 58 (1) ◽  
pp. 65-72 ◽  
Author(s):  
Mathieu Pernot ◽  
Mathieu Couade ◽  
Philippe Mateo ◽  
Bertrand Crozatier ◽  
Rodolphe Fischmeister ◽  
...  

2010 ◽  
Vol 42 (3) ◽  
pp. 438-441 ◽  
Author(s):  
Minoru Shinohara ◽  
Karim Sabra ◽  
Jean-Luc Gennisson ◽  
Mathias Fink ◽  
Mickaél Tanter

2019 ◽  
Author(s):  
Stefan Schimschal ◽  
Stephen Fayers ◽  
Nicklas Ritzmann ◽  
Martin Cox ◽  
Iain Whyte

2021 ◽  
Vol 118 (2) ◽  
pp. 023702
Author(s):  
Steve Beuve ◽  
Samuel Callé ◽  
Elise Khoury ◽  
Emmanuel Gilles Simon ◽  
Jean-Pierre Remenieras

2016 ◽  
Vol 39 (3) ◽  
pp. 172-188
Author(s):  
Naoki Sunaguchi ◽  
Yoshiki Yamakoshi ◽  
Takahito Nakajima

This study investigates shear wave phase map reconstruction using a limited number of color flow images (CFIs) acquired with a color Doppler ultrasound imaging instrument. We propose an efficient reconstruction method to considerably reduce the number of CFIs required for reconstruction and compare this method with Fourier analysis-based color Doppler shear wave imaging. The proposed method uses a two-step phase reconstruction process, including an initial phase map derived from four CFIs using an advanced iterative algorithm of optical interferometry. The second step reduces phase artifacts in the initial phase map using an iterative correction procedure that cycles between the Fourier and inverse Fourier domains while imposing directional filtering and total variation regularization. We demonstrate the efficacy of this method using synthetic and experimental data of a breast phantom and human breast tissue. Our results show that the proposed method maintains image quality and reduces the number of CFIs required to four; previous methods have required at least 32 CFIs to achieve equivalent image quality. The proposed method is applicable to real-time shear wave elastography using a continuous shear wave produced by a mechanical vibrator.


2021 ◽  
pp. 104517
Author(s):  
Shuan Yan ◽  
Hongyong Yuan ◽  
Yan Gao ◽  
Boao Jin ◽  
Lizheng Deng ◽  
...  

2020 ◽  
Author(s):  
N. Kerrouche ◽  
A. Alhammadi ◽  
A. AlMershed ◽  
H. Al-Khateeb ◽  
D.N. Tiwary ◽  
...  

2020 ◽  
Author(s):  
Chenglong Wang ◽  
Chengwen Xiao ◽  
Yi Xin ◽  
Wenxing Duan ◽  
Chengsen Zhang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document