Modelling Reactive Power Demand of Distribution Grids Subjected to Renewable Energy Sources

2018 ◽  
Author(s):  
Patrick Larscheid ◽  
Kim Michael Taylor ◽  
Tobias Van Leeuwen ◽  
Albert Moser ◽  
Roland Hermes ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Reactive Power ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Power Demand ◽  
Distribution Grids

Operation and control of a stand-alone power system with integrated multiple renewable energy sources

2021 ◽  
pp. 0309524X2110241
Author(s):  
Nindra Sekhar ◽  
Natarajan Kumaresan
Keyword(s):  
Renewable Energy ◽  
Reactive Power ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Solar Pv ◽  
Power Requirement ◽  
Squirrel Cage ◽  
Hysteresis Controller ◽  
Squirrel Cage Induction Generator ◽  
And Control

To overcome the difficulties of extending the main power grid to isolated locations, this paper proposes the local installation of a combination of three renewable energy sources, namely, a wind driven DFIG, a solar PV unit, a biogas driven squirrel-cage induction generator (SCIG), and an energy storage battery system. In this configuration one bi-directional SPWM inverter at the rotor side of the DFIG controls the voltage and frequency, to maintain them constant on its stator side, which feeds the load. The PV-battery also supplies the load, through another inverter and a hysteresis controller. Appropriately adding a capacitor bank and a DSTATCOM has also been considered, to share the reactive power requirement of the system. Performance of various modes of operation of this coordinated scheme has been studied through simulation. All the results and relevant waveforms are presented and discussed to validate the successful working of the proposed system.

scholarly journals Progresses in Analytical Design of Distribution Grids and Energy Storage

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4270
Author(s):  
Gianpiero Colangelo ◽  
Gianluigi Spirto ◽  
Marco Milanese ◽  
Arturo de Risi
Keyword(s):  
Renewable Energy ◽  
Power Flow ◽  
State Of The Art ◽  
Renewable Energy Sources ◽  
Energy Sources ◽  
Distribution Grid ◽  
Mathematical Methods ◽  
Power Generators ◽  
Bidirectional Power Flow ◽  
Distribution Grids

In the last years, a change in the power generation paradigm has been promoted by the increasing use of renewable energy sources combined with the need to reduce CO2 emissions. Small and distributed power generators are preferred to the classical centralized and sizeable ones. Accordingly, this fact led to a new way to think and design distributions grids. One of the challenges is to handle bidirectional power flow at the distribution substations transformer from and to the national transportation grid. The aim of this paper is to review and analyze the different mathematical methods to design the architecture of a distribution grid and the state of the art of the technologies used to produce and eventually store or convert, in different energy carriers, electricity produced by renewable energy sources, coping with the aleatory of these sources.

scholarly journals Experimental Assessment of a Centralised Controller for High-RES Active Distribution Networks

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3364 ◽  
Author(s):  
Francisco García-López ◽  
Manuel Barragán-Villarejo ◽  
Alejandro Marano-Marcolini ◽  
José Maza-Ortega ◽  
José Martínez-Ramos
Keyword(s):  
Renewable Energy ◽  
Distribution System ◽  
Reactive Power ◽  
Renewable Energy Sources ◽  
Distribution Networks ◽  
Energy Sources ◽  
Renewable Energy Resources ◽  
Real Time Control ◽  
Control Actions ◽  
Active Distribution Networks

This paper assesses the behaviour of active distribution networks with high penetration of renewable energy sources when the control is performed in a centralised manner. The control assets are the on-load tap changers of transformers at the primary substation, the reactive power injections of the renewable energy sources, and the active and reactive power exchanged between adjacent feeders when they are interconnected through a DC link. A scaled-down distribution network is used as the testbed to emulate the behaviour of an active distribution system with massive penetration of renewable energy resources. The laboratory testbed involves hardware devices, real-time control, and communication infrastructure. Several key performance indices are adopted to assess the effects of the different control actions on the system’s operation. The experimental results demonstrate that the combination of control actions enables the optimal integration of a massive penetration of renewable energy.

Sign in / Sign up

Export Citation Format

Share Document