Wind turbine output power maximization based on sliding mode control strategy

Author(s):  
Oscar Barambones ◽  
Patxi Alkorta ◽  
Manuel De La Sen
2018 ◽  
Vol 28 (4) ◽  
pp. e2513 ◽  
Author(s):  
Khalfallah Tahir ◽  
Cheikh Belfedal ◽  
Tayeb Allaoui ◽  
Mouloud Denaï ◽  
M'hamed Doumi

2021 ◽  
Vol 14 (1) ◽  
pp. 484-495
Author(s):  
Rania Moutchou ◽  
◽  
Ahmed Abbou ◽  
Salah Rhaili ◽  
◽  
...  

This paper presents a modelling study and focuses on an advanced higher order slip mode control strategy (Super Twisting Algorithm) for a variable speed wind turbine based on a permanent magnet synchronous generator to capture the maximum possible wind power from the turbine while simultaneously reducing the effect of mechanical stress, powered by a voltage inverter and controlled by vector PWM technique. This paper presents first and second order sliding mode control schemes. On the other hand, a challenging matter of pure SMC of order one can be summed up in the produced chattering phenomenon. In this work, this issue has been mitigated by implementing a new control. The proposed control, characterized by a precision in the case of a continuation of a significant reduction of the interference phenomenon, successfully addresses the problems of essential non-linearity of wind turbine systems. This type of control strategy presents more advanced performances such as behaviour without chattering (no additional mechanical stress), excellent convergence time, robustness in relation to external disturbances (faults in the network) and to non-modelled dynamics (generator and turbine) which have been widely used in power system applications by first order sliding mode control. In particular, second-order sliding regime control algorithms will be applied to the PMSG to ensure excellent dynamic performance. The suggested control is compared to the proportional-integral controller and sliding mode control of order one. The results of simulations under turbulent wind speed and parameter variations show the efficiency, robustness and significantly improved performance of the proposed control approach to distinguish and track quickly (about 10ms depending on the shading pattern) and at the same time saving the main priorities of the sliding mode of order one by reducing the existing chatter. The systems performances were tested and compared using Matlab/Simulink Software.


2021 ◽  
Vol 236 ◽  
pp. 01020
Author(s):  
XU Wen-kuan ◽  
ZHANG You-peng

A resonant sliding mode control strategy based on the resonant sliding film surface is proposed to control the turbine-side converter of the wind turbine so that the wind turbine can be connected to the grid smoothly under the condition of unbalanced grid voltage. Taking the doubly-fed asynchronous wind generator working under unbalanced grid voltage as the control object, establish its mathematical model and its generator-side converter. Taking the instantaneous power in the α β static coordinate system as the state variable of the sliding mode controller, the resonant sliding mode controller is studied, its parameters are designed, and experiments are carried out in the simulation platform MATLAB. A 1.5MW motor model was established and tested, and it was verified that the resonant sliding mode control strategy can control the grid voltage without static error and realize the smooth grid connection of wind turbines.


Sign in / Sign up

Export Citation Format

Share Document