PUF Architecture with Run-Time Adaptation for Resilient and Energy-Efficient Key Generation via Sensor Fusion

Author(s):  
Sachin Taneja ◽  
Massimo Alioto
MACRo 2015 ◽  
2015 ◽  
Vol 1 (1) ◽  
pp. 275-282 ◽  
Author(s):  
Bence Koszteczky ◽  
Gyula Simon

AbstractA sensor fusion algorithm is proposed, which can be used to fuse measurements from a distributed sensor network, containing inexpensive, easily deployable and energy efficient magnetic sensor devices. The sensor measurements are collected and transferred to a central base station, where the sensor fusion is performed, using the sensor location. The algorithm provides location, direction, and speed information about the detected vehicles. The paper describes the sensor technology and the fusion method, and the performance of the system is illustrated by real test measurements.


2021 ◽  
Author(s):  
Akram Hadeed

Recently, technology scaling has enabled the placement of an increasing number of cores, in the form of chip-multiprocessors (CMPs) on a chip and continually shrinking transistor sizes to improve performance. In this context, power consumption has become the main constraint in designing CMPs. As a result, uncore components power consumption taking increasing portion from the on-chip power budget; therefore, designing power management techniques, particularly memory and network-on-chip (NoC) systems, has become an important issue to solve. Consequently, a considerable attention has been directed toward power management based on CMPs components, particularly shared caches and uncore interconnected structures, to overcome the challenges of limited chip power budget.<div>This work targets to design an energy-efficient uncore architecture by using heterogeneity in components (cache cells) and operational parameters (Voltage/Frequency). In order to ensure the minimum impact on the system performance, a run-time approach is investigated to assess the proposed method. An architecture is proposed where the cache layer contains the heterogenous cache banks in all placed in one frequency voltage domain. Average memory access time (AMAT) was selected as a network monitor to monitor the performance on the run-time. The appropriate size and type of the last level cache (LLC) and Voltage/Frequency for the uncore domain is adjusted according to the calculated AMAT which indicates the system demand from the uncore.<br></div><div>The proposed hybrid architecture was implemented, investigated and compared with the a baseline model where only SRAM banks were used in the last level cache. Experimental results on the Princeton Application Repository for Shared-Memory Computers (PARSEC) benchmark suit,show that the proposed architecture yields up to a 40% reduction in overall chip energy-delay product with a marginal performance degradation in average of -1.2% below the baseline one. The best energy saving was 55% and the worse degradation was only 15%.<br></div>


2020 ◽  
Vol 10 (3) ◽  
pp. 25
Author(s):  
Ali Aalsaud ◽  
Fei Xia ◽  
Ashur Rafiev ◽  
Rishad Shafik ◽  
Alexander Romanovsky ◽  
...  

Contemporary embedded systems may execute multiple applications, potentially concurrently on heterogeneous platforms, with different system workloads (CPU- or memory-intensive or both) leading to different power signatures. This makes finding the most energy-efficient system configuration for each type of workload scenario extremely challenging. This paper proposes a novel run-time optimization approach aiming for maximum power normalized performance under such circumstances. Based on experimenting with PARSEC applications on an Odroid XU-3 and Intel Core i7 platforms, we model power normalized performance (in terms of instruction per second (IPS)/Watt) through multivariate linear regression (MLR). We derive run-time control methods to exploit the models in different ways, trading off optimization results with control overheads. We demonstrate low-cost and low-complexity run-time algorithms that continuously adapt system configuration to improve the IPS/Watt by up to 139% compared to existing approaches.


2021 ◽  
Author(s):  
Akram Hadeed

Recently, technology scaling has enabled the placement of an increasing number of cores, in the form of chip-multiprocessors (CMPs) on a chip and continually shrinking transistor sizes to improve performance. In this context, power consumption has become the main constraint in designing CMPs. As a result, uncore components power consumption taking increasing portion from the on-chip power budget; therefore, designing power management techniques, particularly memory and network-on-chip (NoC) systems, has become an important issue to solve. Consequently, a considerable attention has been directed toward power management based on CMPs components, particularly shared caches and uncore interconnected structures, to overcome the challenges of limited chip power budget.<div>This work targets to design an energy-efficient uncore architecture by using heterogeneity in components (cache cells) and operational parameters (Voltage/Frequency). In order to ensure the minimum impact on the system performance, a run-time approach is investigated to assess the proposed method. An architecture is proposed where the cache layer contains the heterogenous cache banks in all placed in one frequency voltage domain. Average memory access time (AMAT) was selected as a network monitor to monitor the performance on the run-time. The appropriate size and type of the last level cache (LLC) and Voltage/Frequency for the uncore domain is adjusted according to the calculated AMAT which indicates the system demand from the uncore.<br></div><div>The proposed hybrid architecture was implemented, investigated and compared with the a baseline model where only SRAM banks were used in the last level cache. Experimental results on the Princeton Application Repository for Shared-Memory Computers (PARSEC) benchmark suit,show that the proposed architecture yields up to a 40% reduction in overall chip energy-delay product with a marginal performance degradation in average of -1.2% below the baseline one. The best energy saving was 55% and the worse degradation was only 15%.<br></div>


Sign in / Sign up

Export Citation Format

Share Document